ISO 10110-5:1996/Cor 1:1996
(Corrigendum)Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances - Technical Corrigendum 1
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances - Technical Corrigendum 1
Replaces the word spherical with the word aspheric in clause 3.10, second line.
Optique et instruments d'optique — Indications sur les dessins pour éléments et systèmes optiques — Partie 5: Tolérances de forme de surface — Rectificatif technique 1
General Information
Relations
Frequently Asked Questions
ISO 10110-5:1996/Cor 1:1996 is a standard published by the International Organization for Standardization (ISO). Its full title is "Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances - Technical Corrigendum 1". This standard covers: Replaces the word spherical with the word aspheric in clause 3.10, second line.
Replaces the word spherical with the word aspheric in clause 3.10, second line.
ISO 10110-5:1996/Cor 1:1996 is classified under the following ICS (International Classification for Standards) categories: 01.100.20 - Mechanical engineering drawings; 37.020 - Optical equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 10110-5:1996/Cor 1:1996 has the following relationships with other standards: It is inter standard links to ISO 10110-5:1996, ISO 10110-5:2007; is excused to ISO 10110-5:1996. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 10110-5:1996/Cor 1:1996 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL STANDARD IS0 1011 O-51 996
TECHNICAL CORRIGENDUM 1
Published 1996-08-01
INTERNAllONU ORGANUA~ON FOR STANDARDlZATlONo hdwYi+APOaHM OPfAHH3A~HF) n0 C ’TAH~A~~3A~~~. OR~NlSAnON lmRNATlONAl,E DE ~RMALl~TlON
- Preparation of drawings
Optics and optical instruments
for optical elements and systems -
Part 5:
Surface form tolerances
TECHNICAL CORRIGENDUM 1
Indications SW /es dessins pour &&men ts et s ystemes optiques -
Optique et instruments d ’optique -
Par-tie 5: Tokrances de forme de surface
RECTIFICATIF TECHNIQUE I
Technical Corrigendum 1 to International Standard IS0
...
NORME INTERNATIONALE ISO 1011 O-5: 1996
RECTIFICATIF TECHNIQUE 1
Publié 1996-08-01
INTERNATIONAL ORGANIZATION FOR STANDARUZAllON. MWYHAPOAHAJ) OPfAHH3A~HR no CTAHAAPTH3AL&lH. ORGANISATION lNTERNATlONALE DE ~RMALISA’IWN
Indications sur
Optique et instruments d’optique -
les dessins pour éléments et systèmes optiques -
Partie 5:
Tolérances de forme de surface
RECTIFICATIF TECHNIQUE 1
Op tics and op tical instruments - Preparation of drawings for optical elements and systems -
Part 5: Surface form tolerances
TECHNICAL CORRIGENDUM 7
Le Rectificatif technique 1 à la Norme in
...
NORME INTERNATIONALE ISO 1011 O-5: 1996
RECTIFICATIF TECHNIQUE 1
Publié 1996-08-01
INTERNATIONAL ORGANIZATION FOR STANDARUZAllON. MWYHAPOAHAJ) OPfAHH3A~HR no CTAHAAPTH3AL&lH. ORGANISATION lNTERNATlONALE DE ~RMALISA’IWN
Indications sur
Optique et instruments d’optique -
les dessins pour éléments et systèmes optiques -
Partie 5:
Tolérances de forme de surface
RECTIFICATIF TECHNIQUE 1
Op tics and op tical instruments - Preparation of drawings for optical elements and systems -
Part 5: Surface form tolerances
TECHNICAL CORRIGENDUM 7
Le Rectificatif technique 1 à la Norme in
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...