ISO/TR 6750-2:2024

Earth-moving machinery — Operator's manual — Part 2: List of references

This document provides a list of standard deliverables, containing provisions for information to be included in the operator’s manual. This document applies to earth-moving machinery as defined in ISO 6165. The list of standard deliverables is being provided as guidance in creating operator´s manuals. NOTE Standard deliverables refer to different types of documents, e.g. International Standard (IS), Technical Specification (TS), Technical Report (TR), Publicly Available Specification (PAS).

Engins de terrassement — Manuel de l'opérateur — Partie 2: Liste de références

Le présent document fournit une liste de livrables,, qui comprennent des dispositions relatives aux informations à inclure dans le manuel d'utilisation. Le présent document s'applique aux engins de terrassement tels que définis dans l'ISO 6165. Cette liste de livrables est fournie à titre de guide pour la création de manuels de l’opérateur. NOTE Les livrables se réfèrent à différents types de documents, par exemple norme internationale (IS), spécification technique (TS), rapport technique (TR), spécification publiquement disponible (PAS).

General Information

• Status: Published
• Publication Date: 30-Jan-2024
• ICS: 53.100 - Earth-moving machinery
• Technical Committee: ISO/TC 127/SC 3 - Machine characteristics, electrical and electronic systems, operation and maintenance
• Drafting Committee: ISO/TC 127/SC 3 - Machine characteristics, electrical and electronic systems, operation and maintenance
• Current Stage: 6060 - International Standard published
• Start Date: 31-Jan-2024
• Due Date: 24-Jan-2025
• Completion Date: 31-Jan-2024

Relations

• Revises: ISO/TR 6750-2:2022 - Earth-moving machinery — Operator's manual — Part 2: List of references
• Effective Date: 29-Jul-2023

Standards Content (Sample)

FINAL
TECHNICAL ISO/DTR
DRAFT
REPORT 6750-2
ISO/TC 127/SC 3
Earth-moving machinery — Operator's
Secretariat: JISC
manual —
Voting begins on:
2023-11-06
Part 2:
Voting terminates on:
List of references
2024-01-01
Engins de terrassement — Manuel de l'opérateur —
Partie 2: Liste de références
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/DTR 6750-2:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 1 ----------------------
ISO/DTR 6750-2:2023(E)
FINAL
TECHNICAL ISO/DTR
DRAFT
REPORT 6750-2
ISO/TC 127/SC 3
Earth-moving machinery — Operator's
Secretariat: JISC
manual —
Voting begins on:
Part 2:
Voting terminates on:
List of references
Engins de terrassement — Manuel de l'opérateur —
Partie 2: Liste de références
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: [phone]
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: [e-mail]
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/DTR 6750-2:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 2 ----------------------
ISO/DTR 6750-2:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 References for information to be included in the operator's manual .1
Bibliography . 4
iii
© ISO 2023 – All rights reserved

---------------------- Page: 3 ----------------------
ISO/DTR 6750-2:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types o
...

ISO/DTR 6750-2:2023(E)
ISO/TC 127/SC 3
Secretariat: JISC
Date: 2023-07-2510-23
Earth-moving machinery — Operator's manual — —
Part 2:
List of references
Engins de terrassement — Manuel de l'opérateur —
Partie 2: Liste de références
DTR stage

Warning for WDs and CDs
This document is not an ISO International Standard. It is distributed for review and comment. It is subject to
change without notice and may not be referred to as an International Standard.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.


A model manuscript of a draft International Standard (known as “The Rice Model”) is available at

© ISO #### – All rights reserved

---------------------- Page: 1 ----------------------
ISO #####-#:####(X)
© ISO 20XX
2 © ISO #### – All rights reserved

---------------------- Page: 2 ----------------------
ISO/DTR 6750-2:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland
© ISO #### – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/DTR 6750-2:2023(E)
Contents
Foreword . v
Introduction .vi
Part 2: List of references .1
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
4 References for information to be included in the operator's manual . 1
Bibliography .4

iv © ISO #### – All rights reserved

---------------------- Page: 4 ----------------------
ISO/DTR 6750-2:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of
(a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice
of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents. ISO shall not be held responsibl
...