ISO 27769:2016
(Main)Wood-based panels — Wet process fibreboard
- BACK
- 07-Dec-2016
- 79.060.20
- ISO/TC 89/SC 1
Wood-based panels — Wet process fibreboard
ISO 27769:2016 provides a classification matrix and related mandatory tests for two types of wet process fibreboard made from wood: softboards and hardboards and specifies the relevant manufacturing property requirements.
Panneaux à base de bois — Panneau de fibres obtenu par procédé humide
General Information
Relations
This May Also Interest You
ISO 17064:2016 provides definitions and terminology applying to all types of fibreboard, particleboard and oriented strand board (OSB).
- Standard3 pagesEnglish language
- Standard3 pagesFrench language
- 19-Oct-2016
- 79.060.20
- ISO/TC 89/SC 1
ISO 16895:2016 specifies a classification matrix, related mandatory tests and thickness ranges for ultra-low-, low-, medium- and high-density dry process wood-based fibreboard. It then provides the manufacturing property requirements for these types of uncoated fibreboard. The values listed in this International Standard relate to product properties used to classify fibreboards into one of four types (UDF, LDF, MDF and HDF, see Clause 3), one of four grades (GP, FN, BL and LB), for use in one of four service conditions (REG, MR1, MR2, and HMR). The values are not characteristic values to be used for design purposes. NOTE Fibreboards are broadly divided into two groups based on the manufacturing process, namely the dry process group and the wet process group (see Clause 3). Wet process fibreboards lie outside the scope of this International Standard.
- Standard29 pagesEnglish language
- Standard29 pagesEnglish language
- 27-Jan-2016
- 79.060.20
- ISO/TC 89/SC 1
ISO 17064:2016 provides definitions and terminology applying to all types of fibreboard, particleboard and oriented strand board (OSB).
- Standard3 pagesEnglish language
- Standard3 pagesFrench language
- 19-Oct-2016
- 79.060.20
- ISO/TC 89/SC 1
ISO 16895:2016 specifies a classification matrix, related mandatory tests and thickness ranges for ultra-low-, low-, medium- and high-density dry process wood-based fibreboard. It then provides the manufacturing property requirements for these types of uncoated fibreboard. The values listed in this International Standard relate to product properties used to classify fibreboards into one of four types (UDF, LDF, MDF and HDF, see Clause 3), one of four grades (GP, FN, BL and LB), for use in one of four service conditions (REG, MR1, MR2, and HMR). The values are not characteristic values to be used for design purposes. NOTE Fibreboards are broadly divided into two groups based on the manufacturing process, namely the dry process group and the wet process group (see Clause 3). Wet process fibreboards lie outside the scope of this International Standard.
- Standard29 pagesEnglish language
- Standard29 pagesEnglish language
- 27-Jan-2016
- 79.060.20
- ISO/TC 89/SC 1
ISO 16893:2016 specifies a classification matrix and the related mandatory tests and thickness ranges to be applied to wood-based particleboard for general purposes, furniture, load-bearing applications and heavy-duty load-bearing applications. It then provides the manufacturing property requirements for these types of uncoated particleboard. The values listed in this International Standard relate to product properties used to classify particleboards into one of four grades (P-GP, P-FN, P-LB or P-HLB, see Clause 3), for use in three service conditions (REG, MR1 and MR2). The values are not characteristic values to be used for design purposes.
- Standard18 pagesEnglish language
- Standard18 pagesEnglish language
- Standard18 pagesEnglish language
- 06-Jan-2016
- 79.060.20
- ISO/TC 89/SC 2
ISO 16894:2009 gives definitions, classifications and specifications for the manufacturing requirements of oriented strand board (OSB). The values given are used to classify OSB into one of four types, namely OSB type GP-REG, LB-REG, LB-MR or HLB-MR. The values are related to panel properties, but are not characteristic values to be used for design purposes.
- Standard14 pagesEnglish language
- 03-Nov-2009
- 01.040.79
- 79.060.20
- ISO/TC 89/SC 2
The purpose of the method specified is to obtain an indication of machinability by cutting tools. The principle is based on the complete combustion of test pieces and weighing the sand remaining in the desiccator at the end of the procedure. The tubular hearth used to ignite the test pieces is shown in the figure.
- Standard3 pagesEnglish language
- Standard3 pagesFrench language
- Standard3 pagesFrench language
This document specifies a method of determining the degree of disintegration of plastic materials when exposed to a laboratory-scale composting environment. The method is not applicable to the determination of the biodegradability of plastic materials under composting conditions. Further testing is necessary to be able to claim compostability.
- Standard9 pagesEnglish language
- Standard9 pagesFrench language
- 24-Aug-2023
- 83.080.01
- ISO/TC 61/SC 14
This document gives guidance and requirements for the education, examination and evaluation of the inspectors’ and maintenance technicians’ competence concerning public playground and recreational areas. This document describes the knowledge and competence required for each specific task an inspector or technician performs. This document is intended primarily for public playgrounds, but the principles are applicable to other recreational areas. This document does not include benefit/risk assessment methods. This document does not cover the competence of staff conducting product certification. NOTE 1 The different types of inspections covered are: routine visual inspection; operational inspection; annual main inspection; post-installation inspection; post-accident inspection; pre-installation consultation; mid-installation surveillance. NOTE 2 This document can be applicable to: roller-sport infrastructure; multi-sport arenas; outdoor exercise equipment; bouldering walls; portable and permanent socketed goals; parkour facilities; adventure playgrounds; ropes courses; inflatable play equipment.
- Technical specification23 pagesEnglish language
- Draft22 pagesEnglish language
- Draft22 pagesEnglish language
This document instructs the manufacturers of tractors and implements how to integrate mechanically and use the HPI. NOTE The terms "tractor" and "implement” are used instead of “supply system” and “consumer system” for better understanding in this part.
- Standard5 pagesEnglish language
- 24-Aug-2023
- 65.060.10
- ISO/TC 23/SC 19
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.