ISO 8124-3:2020/Amd 1

Safety of toys — Part 3: Migration of certain elements — Amendment 1: Limits for boron and other elements in slime, and barium in modelling clay

Sécurité des jouets — Partie 3: Migration de certains éléments — Amendment 1: Titre manque

General Information

• Status: Not Published
• ICS: 97.200.50 - Toys
• Technical Committee: ISO/TC 181 - Safety of toys
• Drafting Committee: ISO/TC 181 - Safety of toys
• Current Stage: 6000 - International Standard under publication
• Completion Date: 15-Feb-2023

Relations

• Amends: ISO 8124-3:2020 - Safety of toys — Part 3: Migration of certain elements
• Effective Date: 06-Jun-2022

Standards Content (Sample)

ISO 8124-3 DAmd :2020/Amd.1:20222023(E)
ISO TC 181/WG 8
Secretariat: DS
Date: 2023-01-18
Safety of toys — Part 3: Migration of certain elements — Amendment 1
Limits for boron and other elements in slime, and barium in modelling clay
---------------------- Page: 1 ----------------------
ISO 8124-3:2020/Amd.1:2023(E)
© ISO 20XX2023

All rights reserved. Unless otherwise specified, or required in the context of its implementation,

no part of this publication may be reproduced or utilized otherwise in any form or by any means,

electronic or mechanical, including photocopying, or posting on the internet or an intranet,

without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
2 © ISO 2021– All rights reserved
ii © ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 8124-3:2020/Amd.1:2023(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national

standards bodies (ISO member bodies). The work of preparing International Standards is normally

carried out through ISO technical committees. Each member body interested in a subject for which a

technical committee has been established has the right to be represented on that committee.

International organizations, governmental and non-governmental, in liaison with ISO, also take part in

the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all

matters of electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see

www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 181, Safety of toys.
A list of all parts in the ISO 8124 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www.iso.org/members.html.
© ISO 2021– All rights reserved 3
© ISO 2023 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 8124-3:2020/Amd.1:2023(E)
Safety of toys — Part 3: Migration of certain elements —
Amendment 1: Limits for boron and other elements in slime, and
barium in modelling clay
Introduction
Add the following content below " —"— 25,0 µg for barium;".
— 30,0 ug for boron;
Clause 3
Add the following terminological entries.
3.13
slime

water-based gel or gel like material, clear or coloured, which is viscous, slippery, and often non-

Newtonian fluids, intended for play by hand manipulation, kneading and stretching

Note 1 to entry: A material behaving in a non-Newtonian manner will have a change in viscosity, i.e.,. become

more or less viscous, when subjected to shear forces such as manipulation, with such a change being reversible

when the shear forces cease to be applied.
3.14
modelling clay and putty

flexible solid or semi-solid mixtures that retain their shape and form when moulded into a shape,

intended to create representations of objects by hand manipulation or to be extruded into profiles by

the toy.
4.2
Replace Table 1 with the following
...

INTERNATIONAL ISO
STANDARD 8124-3
Third edition
2020-03
AMENDMENT 1
Safety of toys —
Part 3:
Migration of certain elements
AMENDMENT 1: Limits for boron and
other elements in slime, and barium in
modelling clay
PROOF/ÉPREUVE
Reference number
ISO 8124-3:2020/Amd.1:2023(E)
© ISO 2023
---------------------- Page: 1 ----------------------
ISO 8124-3:2020/Amd.1:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on

the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below

or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE © ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 8124-3:2020/Amd.1:2023(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to

the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see

www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 181, Safety of toys.
A list of all parts in the ISO 8124 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www.iso.org/members.html.
iii
© ISO 2023 – All rights reserved PROOF/ÉPREUVE
---------------------- Page: 3 ----------------------
ISO 8124-3:2020/Amd.1:2023(E)
Safety of toys —
Part 3:
Migration of certain elements
AMENDMENT 1: Limits for boron and other elements in slime,
and barium in modelling clay
Introduction
Add the following content below "— 25,0 µg for barium;".
— 30,0 ug for boron;
Clause 3
Add the following terminological entries.
3.13
slime

water-based gel or gel like material, clear or coloured, which is viscous, slippery, and often non-

Newtonian fluids, intended for play by hand manipulation, kneading and stretching

Note 1 to entry: A material behaving in a non-Newtonian manner will have a change in viscosity, i.e. become

more or less viscous, when subjected to shear forces such as manipulation, with such a change being reversible

when the shear forces cease to be applied.
3.14
modelling clay and putty

flexible solid or semi-solid mixtures that retain their shape and form when moulded into a shape,

intended to create representations of objects by hand manipulation or to be extruded into profiles by

the toy.
4.2
Replace Table 1 with the following table.
Table 1 — Maximum acceptable element migration from toy materia
...