ISO/TS 8000-311:2012
(Main)Data quality — Part 311: Guidance for the application of product data quality for shape (PDQ-S)
Data quality — Part 311: Guidance for the application of product data quality for shape (PDQ-S)
ISO/TS 8000-311:2012 provides guidance for the application of product data quality for shape, as described in ISO 10303-59.
Qualité des données — Partie 311: Directives pour l'application de la qualité des données de produit pour les formes (PDQ-S)
General Information
Standards Content (Sample)
TECHNICAL ISO/TS
SPECIFICATION 8000-311
First edition
2012-04-15
Data quality —
Part 311:
Guidance for the application of product
data quality for shape (PDQ-S)
Qualité des données —
Partie 311: Directives pour l'application de la qualité des données de
produit pour les formes (PDQ-S)
Reference number
ISO/TS 8000-311:2012(E)
©
ISO 2012
---------------------- Page: 1 ----------------------
ISO/TS 8000-311:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/TS 8000-311:2012(E)
Contents page
1. Scope . 1
2. Normative references . 2
3. Terms, definitions and abbreviated terms . 3
3.1 Terms and definitions . 3
3.1.1 application . 3
3.1.2 application protocol . 3
3.1.3 application reference model . 3
3.1.4 data exchange . 3
3.1.5 product . 3
3.1.6 product data . 3
3.1.7 accuracy . 4
3.1.8 inspection result . 4
3.1.9 measurement requirement . 4
3.1.10 product data quality . 4
3.1.11 product shape data . 4
3.1.12 quality criterion . 4
3.1.13 threshold . 5
3.1.14 inspection . 5
3.1.15 quality . 5
3.1.16 quality requirement . 5
3.2 Abbreviated terms . 5
4. Overview of PDQ-S . 6
4.1 Purpose, approach and expected usage scenarios . 6
4.2 Structure of ISO 10303-59 . 6
4.3 PDQ-S schema structure . 7
4.4 Target shape model . 8
4.5 Relationship between ISO 10303-59 and other International Standards dealing with nominal
representation of product data .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.