iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO/TS 5462

(Main)

Rubber latex coated fabric gloves — Specification

Rubber latex coated fabric gloves — Specification

Gants en supports textiles revêtus de latex de caoutchouc - Spécification

General Information

Status
Not Published
ICS
59.080.40 - Coated fabrics
83.140.99 - Other rubber and plastics products
Technical Committee
ISO/TC 45/SC 4 - Products (other than hoses)
Drafting Committee
ISO/TC 45/SC 4 - Products (other than hoses)
Current Stage
6000 - International Standard under publication
Completion Date
03-Aug-2024
Ref Project

Buy Standard

ISO/DTS 5462 - Rubber latex coated fabric gloves — Specification Released:24. 05. 2024ISO/DTS 5462 - Rubber latex coated fabric gloves — Specification Released:24. 05. 2024
PreviousNext
Draft
ISO/DTS 5462 - Rubber latex coated fabric gloves — Specification Released:24. 05. 2024
English language
11 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ISO/DTS 5462 - Rubber latex coated fabric gloves — Specification Released:24. 05. 2024REDLINE ISO/DTS 5462 - Rubber latex coated fabric gloves — Specification Released:24. 05. 2024
PreviousNext
Draft
REDLINE ISO/DTS 5462 - Rubber latex coated fabric gloves — Specification Released:24. 05. 2024
English language
11 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


FINAL DRAFT
Technical
Specification
ISO/DTS 5462
ISO/TC 45/SC 4
Rubber latex coated fabric gloves —
Secretariat: DSM
Specification
Voting begins on:
Gants en supports textiles revêtus de latex de caoutchouc - 2024-06-07
Spécification
Voting terminates on:
2024-08-02
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/DTS 5462:2024(en) © ISO 2024

FINAL DRAFT
ISO/DTS 5462:2024(en)
Technical
Specification
ISO/DTS 5462
ISO/TC 45/SC 4
Rubber latex coated fabric gloves —
Secretariat: DSM
Specification
Voting begins on:
Gants en supports textiles revêtus de latex de caoutchouc -
Spécification
Voting terminates on:
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DTS 5462:2024(en) © ISO 2024

ii
ISO/DTS 5462:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
4.1 General .2
4.2 Type .2
4.3 Finish .2
5 Sampling and selection of test pieces . 3
5.1 Sampling .3
5.2 Selection of test pieces.3
6 Requirements . 3
6.1 Material .3
6.2 Appearance .3
6.3 Tensile properties .4
6.3.1 General .4
6.3.2 Force at break before accelerated aging.4
6.3.3 Force at break after accelerated aging . .4
6.4 Fingertip wear resistance.4
6.5 Thumb-index tear resistance .4
7 Package, mark, transportation, and storage . 4
7.1 Package .4
7.2 Mark .5
7.3 Transportation and storage .5
Annex A (informative) Fingertip wear resistance . 6
Annex B (informative) Thumb-index tear resistance . 9
Bibliography .11

iii
ISO/DTS 5462:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee
SC 4, Products (other than hoses).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
ISO/DTS 5462:2024(en)
Introduction
This document has no conflict or overlap with ISO 21420 or ISO 23388. This specific document is relevant to
the general use of latex coated fabric glove other than PPE.

v
FINAL DRAFT Technical Specification ISO/DTS 5462:2024(en)
Rubber latex coated fabric gloves — Specification
1 Scope
This document specifies the minimum requirements and test methods for rubber latex coated fabric gloves.
This document is applicable for general use fabric gloves which are coated with natural rubber latex and
fabric gloves which are coated with acrylonitrile-butadiene rubber latex. Personal protective equipment
(PPE) is not included in this document.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 780, Packaging — Distribution packaging — Graphical symbols for handling and storage of packages
ISO 1421, Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
ISO 2859-1, Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance
quality limit (AQL) for lot-by-lot inspection
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
rubber latex coated fabric gloves
fabric gloves coated with rubber latex made by dipping process
3.2
air bubble
thin portion, with definite edge, concave or convex, which is created by air in latex coating except for
foaming process
3.3
peeling
insufficient bonding of latex coating and base fabric, resulting partial separation or fully detachment in a glove
3.4
damage
visible holes or scratches on latex coating or/and base fabric of a glove
3.5
crack
visible surface splits or tears on latex coating on a glove

ISO/DTS 5462:2024(en)
3.6
latex migration
latex penetration through base fabric of a glove
3.7
latex flow
excess and irregular shaped latex on the edge of latex coating on a glove
3.8
impurity
other substance on latex coating or/and base fabric of a glove
3.9
flow mark
visible bulged surface that twice as thick as latex coating on a glove
4 Classification
4.1 General
Rubber latex coated fabric gloves are classified by type and finish, as given in 4.2 and 4.3.
4.2 Type
— Type 1: fabric gloves coated by natural rubber latex;
— Type 2: fabric gloves coated by acrylonitrile-butadiene rubber latex.
4.3 Finish
As examples, following coating area can be adopted as finishing for rubber latex coated fabric glove.
— Type A: the gloves partly covered with palm and finger covered with rubber (see Figure 1);
— Type B: the glove fully covered with rubber (see Figure 2).
Figure 1 — Type A gloves
ISO/DTS 5462:2024(en)
Figure 2 — Type B gloves
5 Sampling and selection of test pieces
5.1 Sampling
For reference purposes, gloves shall be sampled and inspected in accordance with single sampling plans for
normal inspection specified in ISO 2859-1. The inspection levels and acceptance quality limits (AQLs) shall
conform to those specified in Table 1 for the characteristics listed.
When a lot size cannot be determined, a lot should
...


Formatted
...
Formatted
...
...
Style Definition
...
Style Definition
...
2023-03-14
Style Definition
...
Style Definition
...
ISO/DISDTS 5462:2022(E)
Style Definition
...
ISO/TC 45/SC 4/WG 5 Style Definition
...
Style Definition
...
Secretariat: DSM
Style Definition
...
Style Definition
Date: 2024-xx .
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Rubber latex coated fabric gloves — Specification
Style Definition
...
Gants en supports textiles revêtus de latex de caoutchouc - Spécification
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
ISO/DISDTS 5462:2022(E:(en)
Formatted: Font: Bold
Formatted: Font: Bold
Formatted: Font: Bold
Formatted: Font: Bold, Font color: Auto
Formatted: HeaderCentered
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
Formatted: Right: 1.5 cm, Gutter: 0 cm, Section start:
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
New page, Header distance from edge: 1.27 cm, Footer
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either
distance from edge: 0.5 cm
ISO at the address below or ISO’s member body in the country of the requester.
Formatted: Default Paragraph Font
ISO copyright office
Formatted: Adjust space between Latin and Asian text,
CP 401 • Ch. de Blandonnet 8 Adjust space between Asian text and numbers
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Fax: +41 22 749 09 47
EmailE-mail: copyright@iso.org
Formatted: zzCopyright address, Adjust space between
Website: www.iso.orgwww.iso.org Latin and Asian text, Adjust space between Asian text
and numbers
Published in Switzerland
Formatted: FooterPageRomanNumber
ii
ii
ISO/DISDTS 5462:2022(E:(en)
Formatted: Font: Bold
Formatted: Font: Bold
Formatted: Font: Bold
Contents
Formatted: Font: Bold, Font color: Auto
Formatted: HeaderCentered, Left
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification. 2
4.1 General. 2
4.2 Type . 2
4.3 Finish . 2
5 Sampling and selection of test pieces . 4
5.1 Sampling . 4
5.2 Selection of test pieces . 5
6 Requirements . 5
6.1 Material . 5
6.2 Appearance . 5
6.3 Tensile properties . 5
6.3.1 General. 5
6.3.2 Force at break before accelerated aging . 5
6.3.3 Force at break after accelerated aging . 6
6.4 Fingertip wear resistance . 6
6.5 Thumb-index tear resistance . 6
7 Package, mark, transportation, and storage . 6
7.1 Package . 6
7.2 Mark . 6
7.3 Transportation and storage . 7
Annex A (informative) Fingertip wear resistance . 8
Annex B (informative) Thumb-index tear resistance . 13
Bibliography . 16

Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification. 2
5 Sampling and selection of test pieces . 3
6 Requirements . 4
7 Package, mark, transportation, and storage . 5
Formatted: FooterPageRomanNumber, Left
iii
iii
ISO/DISDTS 5462:2022(E:(en)
Formatted: Font: Bold
Formatted: Font: Bold
Formatted: Font: Bold
Annex A (informative) Fingertip wear resistance . 7
Formatted: Font: Bold, Font color: Auto
Annex B (informative) Thumb-index tear resistance . 10
Formatted: HeaderCentered
Bibliography . 12

Formatted: FooterPageRomanNumber
iv
iv
ISO/DISDTS 5462:2022(E:(en)
Formatted: Font: Bold
Formatted: Font: Bold
Formatted: Font: Bold
Foreword
Formatted: Font: Bold, Font color: Auto
Formatted: HeaderCentered, Left
ISO (the International Organization for Standardization) is a worldwide federation of national standards
Formatted: Adjust space between Latin and Asian text,
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
Adjust space between Asian text and numbers
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
ISO documents document should be noted. This document was drafted in accordance with the editorial rules
of the ISO/IEC Directives, Part 2 (see www.iso.org/directiveswww.iso.org/directives).
Attention is drawnISO draws attention to the possibility that some of the elementsimplementation of this
document may beinvolve the subjectuse of (a) patent(s). ISO takes no position concerning the evidence,
validity or applicability of any claimed patent rights. ISO in respect thereof. As of the date of publication of
this document, ISO had not received notice of (a) patent(s) which may be required to implement this
document. However, implementers are cautioned that this may not represent the latest information, which
may be obtained from the patent database available at www.iso.org/patents. ISO shall not be held responsible
for identifying any or all such patent rights. Details of any patent rights identified during the development of
the document will be in the Introduction and/or on the ISO list of patent declarations received (see
www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation onof the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.htmlwww.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee
SC 4, Products (other than hoses).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.htmlwww.iso.org/members.html.
Formatted: FooterPageRomanNumber, Left
v
v
ISO/DISDTS 5462:2022(E:(en)
Formatted: Font: Bold
Formatted: Font: Bold
Formatted: Font: Bold
Introduction
Formatted: Font: Bold, Font color: Auto
Formatted: HeaderCentered
This document has no conflict or overlap with ISO 21420 or ISO 23388. This specific document is relevant to
Formatted: Default Paragraph Font
the general use of latex coated fabric glove other than PPE.
Formatted: Default Paragraph Font
Formatted: Default Paragraph Font
Formatted: Default Paragraph Font
Formatted: FooterPageRomanNumber
vi
vi
ISO/DISDTS 5462:2022(E:(en)
Formatted: Font: Bold
Formatted: Font: Bold
Formatted: Font: Bold
Formatted: Font: Bold, Font color: Auto
Rubber latex coated fabric gloves — Specification
Formatted: HeaderCentered, Left
Formatted: Right: 1.5 cm, Gutter: 0 cm, Section start:
1 Scope
New page, Header distance from edge: 1.27 cm, Footer
distance from edge: 0.5 cm
This document specifies the minimum requirements and test methods for rubber latex coated fabric gloves.
Formatted: Main Title 1, Adjust space between Latin and
Asian text, Adjust space between Asian text and numbers
This document is applicable for general use fabric gloves which are coated with natural rubber latex and fabric
gloves which are coated with acrylonitrile-butadiene rubber latex. Personal protective equipment (PPE) is not
included in this document.
2 Normative references
The following documents are referred to in
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 11999-5:2024(Main)
PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 5: Helmets

This document specifies the minimum design and performance requirements for helmets as part of personal protective equipment (PPE) to be used by firefighters, primarily but not solely to protect against impact and exposure to flame and high thermal loads.

  • Standard
    25 pages
    English language
    sale 15% off
ISO
ISO 14813-1:2024(Main)
Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 1: ITS service domains, service groups and services

This document provides a description of the primary services that have been internationally defined to promote consistency among implementations. Implementations can provide any of these services in combination with any other services that are appropriate. This document organizes ITS services by defining service groups, which are placed into one of several service domains. Each service group contains one or more individual services, each of which is described. This document is intended for use by at least two groups of people involved in the ITS sector: a) those who are looking for ideas about the services that ITS implementations can provide, and b) those who are developing International Standards. For the first group, this document provides service descriptions that can act as the catalyst for more detailed descriptions. The level of detail can differ from one ITS implementation to another, depending on whether or not a national ITS architecture is involved, and whether or not this architecture is based directly on services, or on groups of functions. The service descriptions in this document are pitched at a high-level as too much detail can be prescriptive and reduces flexibility. For standards developers, this document is applicable to Technical Committees who are developing International Standards for the ITS sector. This document is designed to provide information and explanations of services that can form the basis and reason for developing standards. Due to its nature, this document is largely advisory and informative with minimal requirements. It is designed to assist the integration of services into a cohesive reference architecture, thereby promoting interoperability and the use of common data definitions. Specifically, services defined within the service groups can be the basis for defining “use cases”, “user needs” or "user service requirements” depending on the methodology being used to develop the resultant ITS architecture functionality. They can also assist with defining applicable data within data dictionaries, and applicable communications and data exchange standards.

  • Standard
    121 pages
    English language
    sale 15% off
ISO
ISO 24181-1:2024(Main)
Rare earth — Determination of non-rare earth impurities in individual rare earth metals and their oxides — ICP-AES — Part 1: Analysis of Al, Ca, Mg, Fe and Si

This document describes procedures for the determination of non-rare earth impurities in individual rare earth metals and their oxides through the use of inductively coupled plasma atomic emission spectroscopy (ICP-AES). Magnesium (Mg), aluminum (Al), silicon (Si), calcium (Ca) and iron (Fe) are included as non-rare earth impurity elements, and the measurement ranges for each impurity element are specified. The applicable measurement range (mass fraction %) of magnesium, aluminum, silicon and calcium is from 0,001 to 0,2, and that of iron is from 0,001 to 0,5. The verified measurement ranges in the interlaboratory tests are described later in this document.

  • Standard
    11 pages
    English language
    sale 15% off
ISO
ISO 4649:2024(Main)
Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device

This document specifies two methods for the determination of the resistance of rubber to abrasion by means of a rotating cylindrical drum device. The methods involve determination of the volume loss due to the abrasive action of rubbing a test piece over a specified grade of abrasive sheet. Method A is for a non-rotating test piece and method B is for a rotating test piece. For each method, the result can be reported as a relative volume loss or an abrasion resistance index. These test methods are suitable for comparative testing, quality control, specification compliance testing, referee purposes and research and development work. No close relation between the results of this abrasion test and service performance can be inferred. NOTE The abrasion loss is often more uniform using the rotating test piece because the whole surface of the test piece is in contact with the abrasive sheet over the duration of the test. However, there is considerable experience using the non-rotating test piece.

  • Standard
    19 pages
    English language
    sale 15% off
ISO
ISO 14427:2024(Main)
Carbonaceous materials used in the production of aluminium — Cold and tepid ramming pastes — Preparation of unbaked test specimens and determination of apparent density after compaction

This document describes the preparation of unbaked test specimens made by compacting carbonaceous ramming pastes. This document also includes a method for determination of the apparent density after compaction. Unbaked test specimens of ramming paste are not only prepared for determination of the apparent density of the paste after compaction, but also for the determination of the dimensional change during baking and for the subsequent determination of properties of baked test specimens.

  • Standard
    4 pages
    English language
    sale 15% off
ISO
ISO 17544:2024(Main)
Carbonaceous materials used in the production of aluminium — Cold and tepid ramming pastes — Determination of rammability of unbaked pastes

This document describes a method of producing a compaction curve indicating the rammability of carbonaceous ramming pastes used to line cathodes utilized in the production of aluminium. Determination of the rammability enables a ramming paste with the optimum density to be selected.

  • Standard
    6 pages
    English language
    sale 15% off
ISO
ISO 18497-2:2024(Main)
Agricultural machinery and tractors — Safety of partially automated, semi-autonomous and autonomous machinery — Part 2: Design principles for obstacle protection systems

This document specifies principles for the design of obstacle protective systems used in agricultural machinery and tractors that are used in agricultural applications and that have partially automated, semi-autonomous and autonomous functions. Additionally, it provides guidance on the type of information to be provided by the manufacturer on safe working practices (including information about residual risks). The purpose of this document is to assist in the provision of more specific safety requirements, means of verification and information for use to ensure an appropriate level of safety for agricultural machinery and tractors with partially automated, semi-autonomous and autonomous functions used in a specified way. This document deals with the significant hazards relevant to agricultural machinery and tractors with partially automated, semi-autonomous and autonomous functions when used as intended and under the conditions of misuse reasonably foreseeable by the manufacturer during normal operation and service. Applicability of the design principles and any additional detailed requirements for design, verification, validation or information for use are outside the scope of this document. When risk assessment concludes that hazards are not significant hazards, the principles of this document do not apply. NOTE Safety requirements for specific non-automated functions of agricultural machinery and tractors can be available in machine-specific type-C standards. This document is not applicable to: — forestry applications; — operations on public roads including relevant requirements for braking and steering systems. This document is not applicable to agricultural machinery and tractors which are manufactured before the date of its publication, or to systems applied to agricultural machinery and tractors put into use before the date of its publication.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    15 pages
    French language
    sale 15% off
ISO
ISO 7197:2024(Main)
Neurosurgical implants — Sterile, single-use hydrocephalus shunts

This document specifies the performance requirements for sterile, single-use non-active hydrocephalus shunts. This includes not only the valve, but also additional components such as tubes and reservoirs. This document does not provide any recommendations on which type of valve is most suitable for any specific context of use. This document specifies the mechanical and technical requirements to manufacture shunts and the technical information of the valve to be supplied by the manufacturer. This document does not apply to active implants for the treatment of hydrocephalus.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off
ISO
ISO 37005:2024(Main)
Governance of organizations — Developing indicators for effective governance
kSIST ISO/FDIS 37005:2024

This document provides guidance to governing bodies on how to approach the development and use of indicators in their governing activities. This document is primarily written for use by governing bodies, it is also written to be of relevance to a range of other stakeholders inside and outside of the organization to help them improve the quality of the information on which they assess and make decisions regarding the organization’s governance. It is applicable to all organizations regardless of type, size, location, structure or purpose. This document does not cover indicators of effective governance.

  • Standard
    18 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 18497-4:2024(Main)
Agricultural machinery and tractors — Safety of partially automated, semi-autonomous and autonomous machinery — Part 4: Verification methods and validation principles

This document specifies principles for verification methods and validation principles of agricultural machinery and tractors that are used in agricultural applications and that have partially automated, semi-autonomous and autonomous functions. The purpose of this document is to assist in the provision of more specific safety requirements, means of verification and information for use to ensure an appropriate level of safety for agricultural machinery and tractors with partially automated, semi-autonomous and autonomous functions used in a specified way. This document deals with the significant hazards relevant to agricultural machinery and tractors with partially automated, semi-autonomous and autonomous functions when used as intended and under the conditions of misuse reasonably foreseeable by the manufacturer during normal operation and service. Applicability of the design principles and any additional requirements, for design, verification, validation or information for use are outside the scope of this document. When risk assessment concludes that hazards are not significant hazards, the principles of this document do not apply. NOTE Safety requirements for specific non-automated functions of agricultural machinery and tractors can be available in machine-specific type-C standards. This document is not applicable to: — forestry applications; — operations on public roads including relevant requirements for braking and steering systems. This document is not applicable to agricultural machinery and tractors which are manufactured before the date of its publication, or to systems applied to agricultural machinery and tractors put into use before the date of its publication.

  • Standard
    38 pages
    English language
    sale 15% off
  • Standard
    39 pages
    French language
    sale 15% off