ISO 8096:2005

Rubber- or plastics-coated fabrics for water-resistant clothing — Specification

ISO 8096:2005 specifies the requirements for water vapour permeable and non water vapour permeable coated fabrics suitable for use in the construction of water penetration resistant clothing. The standard does not address the method of fabrication of the garment.

Supports textiles revêtus de caoutchouc ou de plastique pour vêtements imperméables à l'eau — Spécifications

General Information

• Status: Published
• Publication Date: 28-Feb-2005
• ICS: 59.080.40 - Coated fabrics
• Technical Committee: ISO/TC 45/SC 4 - Products (other than hoses)
• Drafting Committee: ISO/TC 45/SC 4 - Products (other than hoses)
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 05-Apr-2024

Relations

• Revises: ISO 8096-2:1989 - Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 2: Polyurethane- and silicone elastomer-coated fabrics
• Effective Date: 15-Apr-2008
• Revises: ISO 8096-3:1988 - Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 3: Natural rubber- and synthetic rubber-coated fabrics
• Effective Date: 15-Apr-2008
• Revises: ISO 8096-1:1989/Cor 1:1991 - Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 1: PVC-coated fabrics — Technical Corrigendum 1
• Effective Date: 15-Apr-2008
• Revises: ISO 8096-1:1989 - Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 1: PVC-coated fabrics
• Effective Date: 15-Apr-2008

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 8096
First edition
2005-02-15


Rubber- or plastics-coated fabrics for
water-resistant clothing — Specification
Supports textiles revêtus de caoutchouc ou de plastique pour
vêtements imperméables à l'eau — Spécifications





Reference number
ISO 8096:2005(E)
©
ISO 2005

---------------------- Page: 1 ----------------------
ISO 8096:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2005 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 8096:2005(E)
Contents Page
Foreword. iv
1 Scope. 1
2 Normative references . 1
3 Terms and definitions. 2
4 Marking and information . 3
5 Sampling . 3
6 Testing and compliance . 3
7 Performance . 4
Annex A (normative) Method of sampling and selecting test pieces . 7
Annex B (normative) Determination of the standard deviation and confidence interval of the mean . 8
Annex C (normative) Determination of water penetration resistance (WPR) after flexing . 9
Annex D (normative) Determination of water penetration resistance (WPR) after ageing and
flexing. 10
Annex E (normative) Determination of water penetration resistance (WPR) after abrasion. 11
Annex F (normative) Determination of water penetration resistance (WPR) after dry cleaning. 12
Annex G (normative) Assessment of low-temperature flexibility. 13
Annex H (normative) Determination of coating adhesion (wet) . 14
Annex I (normative) Determination of water vapour permeability index (WVPI) . 18

© ISO 2005 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 8096:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take par
...