ISO 7617-1:2024
(Main)Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics
Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics
This document specifies requirements for coated fabrics for upholstered furniture for interior use, obtained by applying to one side of a weft-knitted base cloth a substantially continuous coating of a suitably plasticized polymer of vinyl chloride, or a copolymer the major constituent of which is vinyl chloride. Such coatings are known as poly(vinyl chloride) (PVC) coatings. This document covers fabrics coated with solid PVC. It also covers two grades with coatings consisting of a layer of expanded PVC.
Supports textiles revêtus de plastique pour ameublement et garniture — Partie 1: Spécifications des étoffes tricotées revêtues de PVC
General Information
Relations
Standards Content (Sample)
International
Standard
ISO 7617-1
Fourth edition
Plastics-coated fabrics for
2024-08
upholstery —
Part 1:
Specification for PVC-coated
knitted fabrics
Supports textiles revêtus de plastique pour ameublement et
garniture —
Partie 1: Spécifications des étoffes tricotées revêtues de PVC
Reference number
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Sampling . 2
5 Testing and compliance . 2
6 Requirements . 3
6.1 Preliminary inspection .3
6.1.1 General .3
6.1.2 Visual inspection .3
6.1.3 Fusion .3
6.2 Colour, embossing and finish .3
6.3 Dimensions .4
6.3.1 Usable width .4
6.3.2 Length of coated fabric in a roll .4
6.3.3 Thickness .4
6.4 Physical requirements .4
6.4.1 Mass of coating per unit area .4
6.4.2 Mechanical properties . .4
6.4.3 Surface properties .4
6.4.4 Properties after ageing .4
6.4.5 Fire behaviour .5
7 Marking . . 6
8 Test report . 7
Annex A (normative) Method of selecting test specimens . 8
Annex B (normative) Determination of resistance to print wear .11
iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee
SC 4, Products (other than hoses).
This fourth edition cancels and replaces the third edition (ISO 7617-1:2001), which has been technically
revised.
The main changes are as follows:
— ISO 105-B01 has been replaced by ISO 105-A01;
— ISO 3303:1990 has been replaced with ISO 3303-2;
— reference to ISO 4674-1 has been added;
— reference to ISO 7854:1995 has been deleted;
— references to ISO 32100 and EN 15977:2011 have been added;
— new specification of ageing conditions have been added to 6.4.4;
— “w“ has been replaced with “≥” in Tables 1 to 4;
— property indication has been altered in Table 2;
— test methods and property requirements have been changed in Tables 2 to 4;
— Annexes B, D and E have been removed; Annex C is now Annex B;
— the specification of the abradant in B.2 has been changed;
— the size of test specimens in B.3 has been changed.
A list of all parts in the ISO 7617 series can be found on the ISO website.
iv
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
v
International Standard ISO 7617-1:2024(en)
Plastics-coated fabrics for upholstery —
Part 1:
Specification for PVC-coated knitted fabrics
1 Scope
This document specifies requirements for coated fabrics for upholstered furniture for interior use, obtained
by applying to one side of a weft-knitted base cloth a substantially continuous coating of a suitably plasticized
polymer of vinyl chloride, or a copolymer the major constituent of which is vinyl chloride. Such coatings are
known as poly(vinyl chloride) (PVC) coatings.
This document covers fabrics coated with solid PVC. It also covers two grades with coatings consisting of a
layer of expanded PVC.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 105-A01, Textiles — Tests for colour fastness — Part A01: General principles of testing
ISO 105-A02, Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour
ISO 105-B02, Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading
lamp test
ISO 105-X12, Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbing
ISO 1419:2019, Rubber- or plastics-coated fabrics — Accelerated-ageing tests
ISO 1421:2016, Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
ISO 2231, Rubber- or plastics-coated fabrics — Standard atmospheres for conditioning and testing
ISO 2286-1, Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Methods for
determination of length, width and net mass
ISO 2286-2, Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for
determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
ISO 2286-3, Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for
determination of thickness
ISO 2411, Rubber- or plastics-coated fabrics — Determination of coating adhesion
ISO 3303-2, Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 2: Hydraulic method
ISO 4674-1:2023, Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate
of tear methods
ISO 5470-2:2021, Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 2:
Martindale abrader
ISO 5978, Rubber- or plastics-coated fabrics — Determination of blocking resistance
ISO 5981:2007, Rubber- or plastics-coated fabrics — Determination of resistance to combined shear flexing
and rubbing
ISO 6451, Plastics coated fabrics — Polyvinyl chloride coatings — Rapid method for checking fusion
ISO 32100, Rubber- or plastics-coated fabrics — Physical and mechanical tests — Determination of flex
resistance by the flexometer method
EN 15977:2011, Rubber or plastic coated fabrics — Mechanical properties — Determination of the elongation
under load and the residual deformation
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
4 Sampling
If individual rolls can be identified with manufacturing batches, at least one sample shall be taken from each
batch in the consignment. Each sample shall be regarded as being representative of its source and suitable
measures shall be taken to preserve the identity between the samples and batch numbers.
If individual rolls cannot be identified in this way, the number of samples to be regarded as being
representative of the bulk shall be fixed by agreement between the interested parties. Such samples shall be
drawn at random.
5 Testing and compliance
Samples shall first be subjected to the preliminary examination described in 6.1, which enables grossly
defective coated fabrics to be rejected immediately. If the samples satisfy this examination, testing shall
continue as follows:
— Tests shall be carried out on a set of test specimens selected from each sample in accordance with
Annex A. If testing shows that the test specimens meet the requirements of Tables 1 to 4, the bulk of the
coated fabri
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.