SIST EN 15210-2:2011
(Main)Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 2: Briquettes
Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 2: Briquettes
This European Standard aims to define the requirements and method used for testing the mechanical durability of briquettes. It is intended for persons and organisations that manufacture, plan, sell, erect or use machinery, equipment, tools and entire plants related to such briquettes, and to all persons and organisations involved in producing, purchasing, selling and utilising briquettes. The durability is the measure of the resistance of densified fuels towards shocks and/or abrasion as a consequence of handling and transportation processes.
Feste Biobrennstoffe - Verfahren zur Bestimmung der mechanischen Festigkeit von Pellets und Briketts - Teil 2: Briketts
Diese Europäische Norm legt die Anforderungen und das Verfahren für die Prüfung der mechanischen Festigkeit von Briketts fest. Sie gilt für Personen und Organisationen, die im Zusammenhang mit diesen Briketts Maschinen, Ausrüstung, Werkzeuge und vollständige Anlagen herstellen, planen, verkaufen, montieren oder anwenden, und für alle Personen und Organisationen, die an der Herstellung, dem Einkauf, dem Verkauf und der Nutzung von Briketts beteiligt sind.
Die mechanische Festigkeit ist ein Maß für die Beständigkeit von gepressten Brennstoffen gegenüber Stoß und/oder Abrieb infolge von Handhabungs und Transportprozessen.
Biocombustibles solides - Méthodes de détermination de la durabilité mécanique des granulés et des briquettes - Partie 2: Briquettes
La présente Norme européenne définit la méthode d’essai de la durabilité mécanique des briquettes et les exigences correspondantes. Elle s’adresse aux fabricants, concepteurs, vendeurs, installateurs et utilisateurs de matériel, d’équipement, d’outils et d’usines complètes où sont utilisées ces briquettes ainsi qu’aux producteurs, acheteurs, vendeurs et utilisateurs de briquettes, qu’il s’agisse d’individus ou d’organisations.
La durabilité mécanique est la mesure de la résistance des combustibles solides aux chocs et/ou à l’abrasion au cours de la manutention et du transport.
Trdna biogoriva - Metode za določanje mehanske trdnosti pelet in briketov - 2. del: Briketi
Cilj tega evropskega standarda je opredeliti zahteve in metodo, ki se uporabljajo za preskušanje mehanske trdnosti briketov. Namenjen je osebam in organizacijam, ki proizvajajo, načrtujejo, prodajajo, postavljajo ali uporabljajo stroje, opremo, orodja in celotne obrate, povezane s takšnimi briketi, in vsem osebam in organizacijam, vključenim v proizvodnjo, nakup, prodajo in uporabo briketov. Trdnost je mera odpornosti zgoščenih goriv proti tresljajem in/ali površinski obrabi, do katerih pride zaradi postopkov rokovanja in prevoza.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.%ULNHWLFeste Biobrennstoffe - Verfahren zur Bestimmung der mechanischen Festigkeit von Pellets und Briketts - Teil 2: BrikettsBiocombustibles solides - Méthodes de détermination de la durabilité mécanique des granulés et des briquettes - Partie 2: BriquettesSolid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 2: Briquettes75.160.10Trda gorivaSolid fuelsICS:Ta slovenski standard je istoveten z:EN 15210-2:2010SIST EN 15210-2:2011en,fr,de01-januar-2011SIST EN 15210-2:2011SLOVENSKI
STANDARDSIST-TS CEN/TS 15210-2:20061DGRPHãþD
SIST EN 15210-2:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15210-2
November 2010 ICS 75.160.10 Supersedes CEN/TS 15210-2:2005English Version
Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes
Biocombustibles solides - Méthodes de détermination de la durabilité mécanique des granulés et des briquettes -Partie 2: Briquettes
Feste Biobrennstoffe - Bestimmung der mechanischen Festigkeit von Pellets und Briketts - Teil 2: Briketts This European Standard was approved by CEN on 19 September 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15210-2:2010: ESIST EN 15210-2:2011
EN 15210-2:2010 (E) 2 Contents page Foreword .31Scope .42Normative references .43Terms and definitions .44Principle .45Apparatus .45.1Briquette tester .45.2Sieve .55.3Balance .66Sample preparation .67Procedure .68Calculation .69Test report .710Precision and bias .7Bibliography .8 SIST EN 15210-2:2011
EN 15210-2:2010 (E) 3 Foreword This document (EN 15210-2:2010) has been prepared by Technical Committee CEN/TC 335 “Solid biofuels”, the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the latest by May 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes CEN/TS 15210-2:2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 15210-2:2011
EN 15210-2:2010 (E) 4 1 Scope This European Standard defines the requirements and method used for testing the mechanical durability of briquettes. It is applicable to persons and organisations that manufacture, plan, sell, erect or use machinery, equipment, tools and entire plants related to such briquettes, and to all persons and organisations involved in producing, purchasing, selling and utilising briquettes. The durability is the measure of the resistance of densified fuels towards shocks and/or abrasion as a consequence of handling and transportation processes.
2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 14588:2010, Solid biofuels
Terminology, definitions and descriptions
EN 14774-1:2009, Solid biofuels
Determination of moisture content
Oven dry method
Part 1: Total moisture
Reference method EN 14774-2:2009, Solid biofuels
Determination of moisture content
Oven dry method
Part 2: Total moisture
Simplified m
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.