SIST-TS CEN/TS 15210-2:2006

Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 2: Briquettes

This working document aims to define the requirements and method used for testing the mechanical durability of briquettes. It is intended for persons and organisations that manufacture, plan, sell, erect or use machinery, equipment, tools and entire plants related to such briquettes, and to all persons and organisations involved in producing, purchasing, selling and utilising briquettes.
The durability is the measure of the resistance of densified fuels towards shocks and/or abrasion in consequence of handling and transportation processes.

Feste Biobrennstoffe - Verfahren zur Bestimmung der mechanischen Festigkeit von Pellets und Briketts - Teil 2: Briketts

Dieses Dokument legt die Anforderungen und Verfahren für die Prüfung der mechanischen Festigkeit von
Presslingen fest. Es ist für Personen und Organisationen bestimmt, die im Zusammenhang mit diesen
Presslingen Maschinen, Ausrüstung, Werkzeuge und vollständige Anlagen herstellen, planen, verkaufen,
montieren oder anwenden, und für alle Personen und Organisationen, die an der Herstellung, dem Einkauf,
dem Verkauf und der Nutzung von Presslingen beteiligt sind.
Die Festigkeit ist ein Maß für die Beständigkeit von gepressten Brennstoffen gegenüber Stoß und/oder Abrieb
infolge von Handhabungs- und Transportprozessen.

Trdna biogoriva – Metode za določanje mehanske trdnosti pelet in briketov – 2. del: Briketi

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2006
• Withdrawal Date: 18-Nov-2010
• ICS: 75.160.40 - Biofuels
• Technical Committee: NAD - Petroleum products, lubricants and related products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 18-Nov-2010
• Due Date: 11-Dec-2010
• Completion Date: 19-Nov-2010
• Mandate: M/298 - Mandate to CEN for standardisation in the field of solid biofuels
• Ref Project: CEN/TS 15210-2:2005 - Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 2: Briquettes

Relations

• Replaced By: SIST EN 15210-2:2011 - Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 2: Briquettes
• Effective Date: 01-Jan-2011
• Replaced By: SIST EN 15210-2:2011 - Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 2: Briquettes
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 15210-2:2006
01-marec-2006
7UGQDELRJRULYD±0HWRGH]DGRORþDQMHPHKDQVNHWUGQRVWLSHOHWLQEULNHWRY±
GHO%ULNHWL
Solid biofuels - Methods for the determination of mechanical durability of pellets and
briquettes - Part 2: Briquettes
Feste Biobrennstoffe - Verfahren zur Bestimmung der mechanischen Festigkeit von
Pellets und Briketts - Teil 2: Briketts
Ta slovenski standard je istoveten z: CEN/TS 15210-2:2005
ICS:
75.160.10 Trda goriva Solid fuels
SIST-TS CEN/TS 15210-2:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 15210-2:2006

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 15210-2:2006
TECHNICAL SPECIFICATION
CEN/TS 15210-2
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
December 2005
ICS 75.160.10

English Version
Solid biofuels - Methods for the determination of mechanical
durability of pellets and briquettes - Part 2: Briquettes
Feste Biobrennstoffe - Verfahren zur Bestimmung der
mechanischen Festigkeit von Pellets und Presslingen - Teil
2: Presslinge
This Technical Specification (CEN/TS) was approved by CEN on 1 August 2005 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15210-2:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 15210-2:2006
CEN/TS 15210-2:2005 (E)
Contents page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Principle.4
5 Apparatus .5
6 Sample preparation.6
7 Procedure .7
8 Calculation.7
9 Test report .8
10 Precision and bias .8

2

---------------------- Page: 4 ----------------------

SIST-TS CEN/TS 15210-2:2006
CEN/TS 15210-2:2005 (E)
Foreword
This Technical Specification (CEN/TS 15210-2:2005) has been prepared by Technical Committee
CEN/TC 335 “Solid biofuels”, the secretariat of which is held by SIS.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this CEN Technical Specification: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST-TS CEN/TS 15210-2:2006
CEN/TS 15210-2:2005 (E)

1 Scope
This working document aims to define the requirements and method used for testing the mechanical durability
of briquettes. It is intended for persons and organisations that manufacture, plan, sell, erect or use machinery,
equipment, tools and entire plants related to such briquettes, and to all persons and organisations involved in
producing, purchasing, selling and utilising briquettes.
The durability is the measure of the resistance of densified fuels towards shocks and/or abrasion in
consequence of handling and transportation processes.

2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
CEN/TS 14588:2003, Solid biofuels – Terminology, definitions and descriptions
CEN/TS 14774-1, Solid biofuels - Methods for determination of moisture content - Oven dry method - Part 1:
Total moisture - Reference method
CEN/TS 14774-2, Solid biofuels - Methods for the determination of moisture content - Oven dry method - Part
2: Total moisture - Simplified method
CEN/TS 14778-1, Solid biofuels – Sampling – Part 1: Methods for sampling
CEN/TS 14778-2, Solid biofuels – Sampling – Part 2: Methods for sampling particulate material transported in
lorries
CEN/TS 14779, Solid biofuels – Sampling – Methods for preparing sampling plans and sampling certificates
CEN/TS 14780, Solid biofuels – Methods for sample preparation
ISO 3310-1, Test sieves – Technical requirements and testing – Part 1:Test sieves of metal wire cloth

3 Terms and definitions
For the purposes of this Techn
...