SIST EN ISO 20957-9:2017

Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods (ISO 20957-9:2016)

This Part of prEN 957 specifies safety requirements for elliptical trainers also described as cross training machines in addition to the general safety requirements of EN 957-1 and should be read in conjunction with it.

Stationäre Trainingsgeräte - Teil 9: Ellipsen-Trainer, zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren (ISO 20957-9:2016)

Dieser Teil von ISO 20957 legt zusätzliche sicherheitstechnische Anforderungen an Ellipsen-Trainer zusätzlich zu den allgemeinen sicherheitstechnischen Anforderungen nach ISO 20957 1 fest.
Dieser Teil von ISO 20957 legt sicherheitstechnischen Anforderungen an kardiovaskuläre Geräte mit vorgegebenen Bewegungsabläufen und/oder Pendelbewegungen fest, die für den Kontakt der Füße des Anwenders mit einer Trittfläche ausgelegt sind, unter Ausnahme von Steppern, und die in sitzender oder stehender Position betrieben werden.

Équipement d'entraînement fixe - Partie 9: Appareils d'entraînement elliptiques, exigences spécifiques de sécurité et méthodes d'essai supplémentaires (ISO 20957-9:2016)

ISO 20957-9:2016 spécifie des exigences de sécurité supplémentaires applicables aux appareils d'entraînement elliptiques, qui complètent les exigences de sécurité générales définies dans l'ISO 20957‑1.
ISO 20957-9:2016 spécifie des exigences de sécurité applicables aux appareils cardiovasculaires, à l'exclusion des monte-escaliers, qui permettent de réaliser un mouvement décrivant une boucle fermée et/ou un mouvement alternatif pour lequel les pieds de l'utilisateur sont destinés à être en contact avec le repose-pied et que l'utilisateur effectue en position assise ou debout.

Nepremična oprema za vadbo - 9. del: Pedalniki, dodatne posebne varnostne zahteve in preskusne metode (ISO 20957-9:2016)

Ta del standarda prEN 957 določa varnostne zahteve za pedalnike, imenovane tudi trenažerji, in se uporablja poleg splošnih varnostnih zahtev standarda EN 957-1, pri čemer naj bi se ga bralo skupaj z njim.

General Information

• Status: Published
• Public Enquiry End Date: 04-Dec-2014
• Publication Date: 19-Feb-2017
• ICS: 97.220.30 - Indoor sports equipment
• Technical Committee: SPO - Sports
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 03-Jan-2017
• Due Date: 10-Mar-2017
• Completion Date: 20-Feb-2017
• Directive: 2001/95/EC - Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety
• Mandate: M/506 - Standardisation mandate issued to the European standardisation organisations (ESOs) to develop European standards for stationary training equipment
• Ref Project: EN ISO 20957-9:2016 - Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods (ISO 20957-9:2016)

Relations

• Replaces: SIST EN 957-9:2003 - Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods
• Effective Date: 01-Mar-2017
• Amended By: SIST EN ISO 20957-9:2017/A1:2019 - Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods - Amendment 1 (ISO 20957-9:2016/Amd 1:2019)
• Effective Date: 01-Jul-2019
• Replaces: SIST EN 957-9:2003 - Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 20957-9:2017
01-marec-2017
1DGRPHãþD
SIST EN 957-9:2003
1HSUHPLþQDRSUHPD]DYDGERGHO3HGDOQLNLGRGDWQHSRVHEQHYDUQRVWQH
]DKWHYHLQSUHVNXVQHPHWRGH,62
Stationary training equipment - Part 9: Elliptical trainers, additional specific safety
requirements and test methods (ISO 20957-9:2016)
Stationäre Trainingsgeräte - Teil 9: Ellipsen-Trainer, zusätzliche besondere
sicherheitstechnische Anforderungen und Prüfverfahren (ISO 20957-9:2016)
Équipement d'entraînement fixe - Partie 9: Appareils d'entraînement elliptiques,
exigences spécifiques de sécurité et méthodes d'essai supplémentaires (ISO 20957-
9:2016)
Ta slovenski standard je istoveten z: EN ISO 20957-9:2016
ICS:
97.220.30 Oprema za dvoranske športe Indoor sports equipment
SIST EN ISO 20957-9:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 20957-9:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 20957-9:2017


EN ISO 20957-9
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2016
EUROPÄISCHE NORM
ICS 97.220.30 Supersedes EN 957-9:2003
English Version

Stationary training equipment - Part 9: Elliptical trainers,
additional specific safety requirements and test methods
(ISO 20957-9:2016)
Équipement d'entraînement fixe - Partie 9: Appareils Stationäre Trainingsgeräte - Teil 9: Ellipsen-Trainer,
d'entraînement elliptiques, exigences spécifiques de zusätzliche besondere sicherheitstechnische
sécurité et méthodes d'essai supplémentaires (ISO Anforderungen und Prüfverfahren (ISO 20957-9:2016)
20957-9:2016)
This European Standard was approved by CEN on 14 August 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20957-9:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 20957-9:2017
EN ISO 20957-9:2016 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 20957-9:2017
EN ISO 20957-9:2016 (E)
European foreword
This document (EN ISO 20957-9:2016) has been prepared by Technical Committee ISO/TC 83 “Sports
and other recreational facilities and equipment” in collaboration with Technical Committee
CEN/TC 136 “Sports, playground and other recreational facilities and equipment” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2017, and conflicting national standards shall be
withdrawn at the latest by May 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 957-9:2003.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 20957-9:2016 has been approved by CEN as EN ISO 20957-9:2016 without any
modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 20957-9:2017

---------------------- Page: 6 ----------------------

SIST EN ISO 20957-9:2017
INTERNATIONAL ISO
STANDARD 20957-9
Second edition
2016-10-15
Stationary training equipment —
Part 9:
Elliptical trainers, additional specific
safety requirements and test methods
Équipement d’entraînement fixe —
Partie 9: Appareils d’entraînement elliptiques, exigences spécifiques
de sécurité et méthodes d’essai supplémentaires
Reference number
ISO 20957-9:2016(E)
©
ISO 2016

---------------------- Page: 7 ----------------------

SIST EN ISO 20957-9:2017
ISO 20957-9:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 20957-9:2017
ISO 20957-9:2016(E)

Contents Page
Foreword .iv
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
5 Safety requirements . 4
5.1 General . 4
5.2 Squeeze and shear points of external construction within the accessible area . 4
5.3 Temperature rise of external construction . 4
5.4 Handlebars . 4
5.4.1 Movable handlebars . 4
5.4.2 Non-movable handlebars . 4
5.4.3 Seat handlebars. 4
5.5 Footplatforms . 5
5.5.1 Non-slip surface . 5
5.5.2 Guard . 5
5.6 Stability . 5
5.7 Endurance . 5
5.8 Seat system . 5
5.9 Additional requirements for class A . 5
5.10 Additional requirements for class B . 6
5.11 Additional requirements for class C . 6
5.12 Additional instructions for use . 6
5.13 Additional warnings . 6
6 Test methods . 6
6.1 General . 6
6.1.1 Dimensional check . 6
6.1.2 Visual examination . 6
6.1.3 Performance test . 6
6.2 Testing of squeeze and shear points . 7
6.3 Testing of temperature rise . 7
6.4 Testing of intrinsic loading . 8
6.5 Testing of handlebars . 8
6.5.1 Movable handlebars . 8
6.5.2 Non-movable handlebars . 9
6.5.3 Seat handlebars. 9
6.6 Testing of stability . 9
6.7 Endurance testing. 9
6.7.1 Speed-independent elliptical trainers . 9
6.7.2 Speed-dependent elliptical trainers . 9
6.8 Testing of seat system . 9
6.9 Testing of additional requirements for class A .10
6.9.1 General.10
6.9.2 Speed-independent elliptical trainers .10
6.9.3 Speed-dependent elliptical trainers .11
6.10 Testing of power repeatability for class B .11
6.11 Testing of friction .12
7 Test report .13
Bibliography .14
© ISO 2016 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 20957-9:2017
ISO 20957-9:2016(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 83, Sports and other recreational facilities and
equipment.
ISO 20957-9 was prepared by Technical Committee ISO/TC 83, Sports and other recreational facilities
and equipment and by Technical Committee CEN/TC 136, Sports, playground and other recreational
facilities and equipment in collaboration.
This second edition cancels and replaces the first edition (ISO 20957-9:2005), which has been
technically revised. The main changes are as follows:
a) publication as an EN ISO;
b) formulation aligned with ISO 20957-1;
c) Clause 5 specified and restructured;
d) Clause 6 specified and restructured;
e) Normative references updated.
ISO 20957 consists of the following parts, under the general title, Stationary training equipment:
— Part 1: General safety requirements and test methods
— Part 2: Strength training equipment, additional specific safety requirements and test methods
— Part 4: Strength training benches, additional specific safety requirements and test methods
— Part 5: Pedal crank training equipment, additional specific safety requirements and test methods
— Part 6 Treadmills, additional specific safety requirements and test methods
— Part 7: Rowing machines, additional specific safety requirements and test methods
— Part 8: Steppers, stairclimbers and climbers — Additional specific safety requirements and test methods
iv © ISO 2016 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 20957-9:2017
ISO 20957-9:2016(E)

— Part 9: Elliptical trainers, additional specific safety requirements and test methods
— Part 10: Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements
and test methods
© ISO 2016 – All rights reserved v

---------------------- Page: 11 ----
...