SIST EN ISO 20957-8:2018
(Main)Stationary training equipment - Part 8: Steppers, stairclimbers and climbers - Additional specific safety requirements and test methods (ISO 20957-8:2017)
Stationary training equipment - Part 8: Steppers, stairclimbers and climbers - Additional specific safety requirements and test methods (ISO 20957-8:2017)
This document specifies safety requirements for stepper, stairclimber and climber machines (hereafter
called training equipment) performed from either a standing or sitting position. The requirements are
in addition to the general safety requirements of ISO 20957-1, with which this document is intended to
be read in conjunction.
This document is applicable to stationary training equipment type stepper, stairclimber and climber
training equipment, within classes S and H. Additional requirements are provided for accuracy class A.
Stationäre Trainingsgeräte - Teil 8: Stepper, Treppensteiggeräte und Climber - Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren (ISO 20957-8:2017)
Dieser Teil der ISO 20957 legt sicherheitstechnische Anforderungen für Stepper, Treppensteiggeräte und Climber-Geräte (im Folgenden Trainingsgeräte genannt) fest, die entweder aus einer stehenden oder sitzenden Position durchgeführt werden, zusätzlich zu den allgemeinen sicherheitstechnischen Anforderungen nach ISO 20957 1 und sollte in Verbindung damit gelesen werden.
Dieser Teil der ISO 20957 gilt für stationäre Trainingsgeräte der Typen Stepper, Treppensteiggeräte und Climber-Trainingsgeräte innerhalb der Klassen S und H. Zusätzliche Anforderungen werden für die Genauigkeitsklasse A bereitgestellt.
Équipement d'entraînement fixe - Partie 8: Monte-escaliers, escalators et simulateurs d'escalade - Exigences spécifiques de sécurité et méthodes d'essai supplémentaires (ISO 20957-8:2017)
L'ISO 20957-8 :2017 spécifie les exigences de sécurité relatives aux monte-escaliers, escalators et simulateurs d'escalade (appelés ci-après « appareils d'entraînement ») utilisés en position debout ou assise. Ces exigences viennent compléter les exigences générales de sécurité de l'ISO 20957‑1, avec laquelle l'ISO 20957-8 :2017 est destiné à être lu conjointement.
L'ISO 20957-8 :2017 s'applique aux appareils d'entraînement fixes de type monte-escaliers, escalator et simulateur d'escalade des classes S et H. Des exigences supplémentaires sont fournies pour la classe de précision A.
Nepremična oprema za vadbo - 8. del: Steperji, tekoče stopnice in vzpenjalniki - Dodatne posebne varnostne zahteve in preskusne metode (ISO 20957-8:2017)
Ta dokument določa varnostne zahteve za stroje za steperje, tekoče stopnice in vzpenjalnike (v nadaljevanju »oprema za vadbo«), ki se uporabljajo stoje ali sede. Te zahteve so dodatne k splošnim varnostnim zahtevam standarda ISO 20957-1, v povezavi s katerimi je treba brati ta dokument.
Ta dokument se uporablja za nepremično opremo za vadbo, in sicer steperje, tekoče stopnice in vzpenjalnike, razredov S in H. Dodatne zahteve so navedene za razred natančnosti A.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 20957-8:2018
01-februar-2018
1DGRPHãþD
SIST EN 957-8:2002
1HSUHPLþQDRSUHPD]DYDGERGHO 6WHSHUMLWHNRþHVWRSQLFHLQY]SHQMDOQLNL
'RGDWQHSRVHEQHYDUQRVWQH]DKWHYHLQSUHVNXVQHPHWRGH ,62
Stationary training equipment - Part 8: Steppers, stairclimbers and climbers - Additional
specific safety requirements and test methods (ISO 20957-8:2017)
Stationäre Trainingsgeräte - Teil 8: Stepper, Treppensteiggeräte und Climber -
Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren (ISO
20957-8:2017)
Équipement d'entraînement fixe - Partie 8: Monte-escaliers, escalators et simulateurs
d'escalade - Exigences spécifiques de sécurité et méthodes d'essai supplémentaires
(ISO 20957-8:2017)
Ta slovenski standard je istoveten z: EN ISO 20957-8:2017
ICS:
97.220.30 Oprema za dvoranske športe Indoor sports equipment
SIST EN ISO 20957-8:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 20957-8:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 20957-8:2018
EN ISO 20957-8
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2017
EUROPÄISCHE NORM
ICS 97.220.30 Supersedes EN 957-8:1998
English Version
Stationary training equipment - Part 8: Steppers,
stairclimbers and climbers - Additional specific safety
requirements and test methods (ISO 20957-8:2017)
Équipement d'entraînement fixe - Partie 8: Monte- Stationäre Trainingsgeräte - Teil 8: Stepper,
escaliers, escalators et simulateurs d'escalade - Treppensteiggeräte und Climber - Zusätzliche
Exigences spécifiques de sécurité et méthodes d'essai besondere sicherheitstechnische Anforderungen und
supplémentaires (ISO 20957-8:2017) Prüfverfahren (ISO 20957-8:2017)
This European Standard was approved by CEN on 9 October 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20957-8:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 20957-8:2018
EN ISO 20957-8:2017 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 20957-8:2018
EN ISO 20957-8:2017 (E)
European foreword
This document (EN ISO 20957-8:2017) has been prepared by Technical Committee ISO/TC 83 "Sports
and other recreational facilities and equipment" in collaboration with Technical Committee
CEN/TC 136 “Sports, playground and other recreational facilities and equipment” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2018, and conflicting national standards shall be
withdrawn at the latest by June 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 957-8:1998.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 20957-8:2017 has been approved by CEN as EN ISO 20957-8:2017 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 20957-8:2018
---------------------- Page: 6 ----------------------
SIST EN ISO 20957-8:2018
INTERNATIONAL ISO
STANDARD 20957-8
Second edition
2017-10
Stationary training equipment —
Part 8:
Steppers, stairclimbers and climbers
— Additional specific safety
requirements and test methods
Équipement d'entraînement fixe —
Partie 8: Monte-escaliers, escalators et simulateurs d'escalade —
Exigences spécifiques de sécurité et méthodes d'essai supplémentaires
Reference number
ISO 20957-8:2017(E)
©
ISO 2017
---------------------- Page: 7 ----------------------
SIST EN ISO 20957-8:2018
ISO 20957-8:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 20957-8:2018
ISO 20957-8:2017(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 6
5 Safety requirements . 6
5.1 General . 6
5.2 External construction . 6
5.2.1 Additional requirements for squeeze and shear points within the
accessible area . 6
5.2.2 Temperature of accessible surfaces . 6
5.3 Intrinsic loading . 6
5.4 Handrails/handlebars . 6
5.5 Footplatforms and stairs . 7
5.5.1 Footplatforms . 7
5.5.2 Stairs . 7
5.6 Endurance . 7
5.7 Freewheel . 7
5.8 Additional requirement for class A . 7
5.9 Additional requirements for stairclimbers . 8
5.9.1 Stepping on and stepping off . 8
5.9.2 Manual stopping system . . . 8
5.9.3 Automatic stopping system to reduce the risk of entrapment . 8
5.10 Additional requirements for seated steppers . 8
5.10.1 Movable handlebars . 8
5.10.2 Non-movable handlebars . 8
5.10.3 Seat handlebars. 9
5.10.4 Seat backrest . 9
5.11 Additional instructions for use . 9
6 Test methods . 9
6.1 General . 9
6.1.1 Dimensional check . 9
6.1.2 Visual examination . 9
6.1.3 Tactile examination. 9
6.1.4 Performance test . 9
6.2 Testing of temperature of accessible surfaces . 9
6.3 Testing of intrinsic loading .10
6.3.1 General.10
6.3.2 Stepper or climber with independent action .10
6.3.3 Stepper or climber with dependent action .10
6.3.4 Stairclimber .10
6.4 Testing of handrails/handlebars .11
6.5 Testing of friction .11
6.6 Endurance testing.12
6.6.1 General.12
6.6.2 Endurance testing for stairclimbers .12
6.6.3 Endurance testing for steppers .12
6.7 Testing of the additional requirements for class A .12
6.8 Testing of stepping on and stepping off .13
6.9 Testing of stopping system and clearance between moving stairs and floor or structure .13
6.10 Testing for additional requirements for seated steppers .14
6.10.1 Movable handlebars .14
© ISO 2017 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 20957-8:2018
ISO 20957-8:2017(E)
6.10.2 Non-movable handlebars .14
6.10.3 Seat handlebars.14
6.10.4 Seat backrest .14
7 Test report .15
Bibliography .16
iv © ISO 2017 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 20957-8:2018
ISO 20957-8:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www.iso.org/iso/foreword.html.
ISO 20957-8 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 136, Sports, playground and other recreational facilities and equipment, in collaboration with ISO
Technical Committee TC 83, Sports and other recreational facilities and equipment, in accordance with
the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 20957-8:2005), which has been
technically revised.
The main changes compared to the previous edition are as follows:
— the Scope has been simplified;
— the formulation has been aligned to ISO 20957-1;
— Clause 5 has been specified and restructured;
— Clause 6 has been specified and restructured.
A list of all parts in the ISO 20957 series can be found on the ISO website.
© ISO 2017 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 20957-8:2018
---------------------- Page: 12 ----------------------
SIST EN ISO 20957-8:2018
INTERNATIONAL STANDARD ISO 20957-8:2017(E)
Stationary training equipment —
Part 8:
Steppers, stairclimbers and climbers — Additional specific
safety requirements and test methods
1 Scope
This document specifies safety requirements for stepper, stairclimber and climber machines (hereafter
called training equipment) performed from either a standing or sitting position. The requirements are
in addition to the general safety requirements of ISO 20957-1, with which this document is intended to
be read in conjunction.
This document is applicable to stationary training equipment type stepper, stairclimber and climber
training equipment, within classes S and H. Additional requirements are provided for accuracy class A.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated refere
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.