SIST EN 60216-2:2006

Electrical insulating materials - Thermal endurance properties -- Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria

This part of IEC 60216 gives guidance for the choice of test criteria for the determination of thermal endurance characteristics. It includes a list of existing published procedures which is however not exhaustive.

Elektroisolierstoffe - Eigenschaften hinsichtlich des thermischen Langzeitverhaltens -- Teil 2: Leitfaden zur Bestimmung thermischer Langzeiteigenschaften von Elektroisolierstoffen - Auswahl der Prüfmerkmale

Matériaux isolants électriques - Propriétés d'endurance thermique -- Partie 2: Détermination des propriétés d'endurance thermique de matériaux isolants électriques - Choix de critères d'essai

Fournit des lignes directrices pour le choix de critères d'essai pour la détermination des caractéristiques d'endurance thermique. Elle comprend une liste non exhaustive de méthodes publiées existantes. Les changements majeurs par rapport à la version précédente sont les suivants: - une révision éditoriale,  - le Tableau 1 a été actualisé selon les feuilles des Parties 3 des publications du SC 15C.

Električni izolacijski materiali – Lastnosti toplotne vzdržljivosti – 2. del: Ugotavljanje lastnosti toplotne vzdržljivosti električnih izolacijskih materialov – Izbiranje preskuševalnih meril (IEC 60216- 2:2005)

General Information

• Status: Published
• Publication Date: 31-Jan-2006
• ICS: 29.035.01 - Insulating materials in general
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Feb-2006
• Due Date: 01-Feb-2006
• Completion Date: 01-Feb-2006
• Ref Project: EN 60216-2:2005 - Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria

Relations

• Replaces: SIST HD 611.2 S1:1998 - Guide for the determination of thermal endurance properties of electrical insulating materials -- Part 2: Choice of test criteria
• Effective Date: 28-Jan-2023
• Revised: SIST HD 611.2 S1:1998 - Guide for the determination of thermal endurance properties of electrical insulating materials -- Part 2: Choice of test criteria
• Effective Date: 13-May-2010

Standards Content (Sample)

SLOVENSKI SIST EN 60216-2:2006

STANDARD
februar 2006
Električni izolacijski materiali – Lastnosti toplotne vzdržljivosti – 2. del:
Ugotavljanje lastnosti toplotne vzdržljivosti električnih izolacijskih materialov
– Izbiranje preskuševalnih meril (IEC 60216- 2:2005)
Electrical insulating materials – Thermal endurance properties – Part 2:
Determination of thermal endurance properties of electrical insulating materials –
Choice of test criteria (IEC 60216- 2:2005)
ICS 29.035.01 Referenčna številka
SIST EN 60216-2:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60216-2
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2005

ICS 17.220.99; 29.035.01 Supersedes HD 611.2 S1:1992


English version


Electrical insulating materials –
Thermal endurance properties
Part 2: Determination of thermal endurance properties
of electrical insulating materials –
Choice of test criteria
(IEC 60216-2:2005)


Matériaux isolants électriques –  Elektroisolierstoffe –
Propriétés d'endurance thermique Eigenschaften hinsichtlich des
Partie 2: Détermination des propriétés thermischen Langzeitverhaltens
d'endurance thermique de matériaux Teil 2: Leitfaden zur Bestimmung
isolants électriques – thermischer Langzeiteigenschaften
Choix de critères d'essai von Elektroisolierstoffen –
(CEI 60216-2:2005) Auswahl der Prüfmerkmale
(IEC 60216-2:2005)

This European Standard was approved by CENELEC on 2005-08-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60216-2:2005 E

---------------------- Page: 2 ----------------------

EN 60216-2:2005 - 2 -
Foreword
*
The text of document 15E/257/FDIS, future edition 4 of IEC 60216-2, prepared by SC 15E , Methods
of test, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60216-2 on 2005-08-01.
This European Standard supersedes HD 611.2 S1:1992.
The main changes from HD 611.2 S1 are as follows:
– editorial;
– Table 1 has been actualized essentially by Part 3 sheets of IEC/SC 15C publications.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60216-2:2005 was approved by CENELEC as a European
Standard without any modification.
__________

*
Subcommittee 15E has been merged with technical committee 98 into the new technical committee 112.

---------------------- Page: 3 ----------------------

- 3 - EN 60216-2:2005
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60172 - Test procedure for the determination of EN 60172 1994
the temperature index of enamelled
winding wires

1) 2)
IEC 60216-3 - Electrical insulating materials - Thermal EN 60216-3 2002
endurance properties
Part 3: Instructions for calculating thermal
endurance characteristics

1) 2)
IEC 60216-5 - Part 5: Determination of relative thermal EN 60216-5 2003
endurance index (RTE) of an insulating
material

1) 2)
IEC 60216-6 - Part 6: Determination of thermal EN 60216-6 2004
endurance indices (TI and RTE) of an
insulating material using the fixed time
frame method

1) 2)
IEC 60243-1 - Electrical strength of insulating materials - EN 60243-1 1998
Test methods
Part 1: Tests at power frequencies

IEC 60317 Series Specifications for particular types of EN 60317 Series
winding wires


1) 2)
IEC 60370 - Test procedure for thermal endurance of HD 570 S1 1990
insulating varnishes - Electric strength
method

IEC 60371 Series Specification for insulating materials EN 60371 Series
based on mica

IEC 60394 Series Varnished fabrics for electrical purposes - -



1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 4 ----------------------

EN 60216-2:2005 - 4 -
Publication Year Title EN/HD Year
1)
IEC 60450 - Measurement of the average viscometric - -
degree of polymerization of new and aged
electrical papers

IEC 60454 Series Specifications for pressure-sensitive EN 60454 Series
adhesive tapes for electrical purposes

IEC 60455 Series Resin based reactive compounds used EN 60455 Series
for electrical insulation

IEC 60464 Series Varnishes used for electrical insulation EN 60464 Series

IEC 60554 Series Specification for cellulosic papers for - -
electrical purposes

IEC 60626 Series Combined flexible materials for electrical EN 60626 Series
insulation

IEC 60641 Series Specification for pressboard and EN 60641 Series
presspaper for electrical purposes

IEC 60667 Series Specification for vulcanized fibre for HD 416 Series
electrical purposes

IEC 60674 Series Specification for plastic films for electrical EN 60674 Series
purposes

IEC 60684 Series Flexible insulating sleeving EN 60684 Series

IEC 60763 Series Specification for laminated pressboard EN 60763 Series

IEC 60819 Series Specification for non-cellulosic papers for - -
electrical purposes

IEC 60893 Series Insulating materials - Industrial rigid EN 60893 Series
laminated sheets based on thermosetting
resins for electrical purposes

1)
IEC 61033 - Test methods for the determination of - -
bond strength of impregnating agents to
an enamelled wire substrate

1)
ISO 37 - Rubber, vulcanized or thermoplastic - - -
Determination of tensile stress-strain
properties

1) 2)
ISO 178 - Plastics - Determination of flexural EN ISO 178 2003
properties

1) 2)
ISO 179-1 - Plastics - Determination of Charpy impact EN ISO 179-1 2000
properties
Part 1: Non-instrumented impact test

1) 2)
ISO 527-2 - Plastics - Determination of tensile EN ISO 527-2 1993
properties
Part 2: Test conditions for moulding and
extrusion plastics

---------------------- Page: 5 ----------------------

- 5 - EN 60216-2:2005
Publication Year Title EN/HD Year
1) 2)
ISO 527-3 - Part 3: Test conditions for films and EN ISO 527-3 1995
sheets

1) 2)
ISO 1520 - Paints and varnishes - Cupping test EN ISO 1520 2001

ISO 1924 Series Paper and board - Determination of -
tensile properties

1) 2)
ISO 2759 - Board - Determination of bursting EN ISO 2759 2003
strength

1) 2)
ISO 8256 - Plastics - Determination of tensile-impact EN ISO 8256 2004
strength

---------------------- Page: 6 ----------------------

NORME CEI
INTERNATIONALE
IEC



60216-2
INTERNATIONAL


Quatrième édition
STANDARD

Fourth edition

2005-08


Matériaux isolants électriques –
Propriétés d'endurance thermique –
Partie 2:
Détermination des propriétés d'endurance
thermique de matériaux isolants électriques –
Choix de critères d'essai

Electrical insulating materials –
Thermal endurance properties –
Part 2:
Determination of thermal endurance
properties of electrical insulating materials –
Choice of test criteria
 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
M
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 7 ----------------------

60216-2  IEC:2005 – 3 –
CONTENTS

FOREWORD.5

1 Scope.9
2 Normative references .9
3 General considerations.13
4 Guide for the choice of properties and end-points.13

Annex A (informative) Additional Information on the group to which new or unknown
materials should be assigned .21

---------------------- Page: 8 ----------------------

60216-2  IEC:2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

ELECTRICAL INSULATING MATERIALS –
THERMAL ENDURANCE PROPERTIES –

Part 2: Determination of thermal endurance
properties of electrical insulating materials –
Choice of test criteria


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
1
International Standard IEC 60216-2 has been prepared by subcommittee 15E : Methods of
test, of IEC technical committee 15: Insulating materials.
This fourth edition of IEC 60216-2 cancels and replaces the third edition issued in 1990, and
constitutes a technical revision.
The main changes from the previous edition are as follows:
– editorial,
– Table 1 has been actualized essentially by Part 3 sheets of SC 15C publications.
—————————
1
Subcommittee 15E has been merged with technical committee 98 into the new technical committee 112.

---------------------- Page: 9 ----------------------

60216-2  IEC:2005 – 7 –
The text of this standard is based on the following documents:
FDIS Report on voting
15E/257/FDIS 15E/259/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
IEC 60216: Electrical insulating materials – Properties of thermal endurance, consists of six
parts:
Part 1: Ageing procedures and evaluation of test results
Part 2: Choice of test criteria
Part 3: Instructions for calculating thermal endurance characteristics
Part 4-1: Ageing ovens – Section 1: Single-chamber ovens
Part 4-2: Ageing ovens – Precision ovens for use up to 300 °C
Part 4-3: Ageing ovens – Multi-chamber ovens
Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material
using the fixed time frame method
NOTE This work may be continued. For revisions and new parts, see the current catalogue of IEC publications for
an up-to-date list.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

---------------------- Page: 10 ----------------------

60216-2  IEC:2005 – 9 –
ELECTRICAL INSULATING MATERIALS –
THERMAL ENDURANCE PROPERTIES –

Part 2: Determination of thermal endurance
properties of electrical insulating materials –
Choice of test criteria



1 Scope
This part of IEC 60216 gives guidance for the choice of test criteria for the determination of
thermal endurance characteristics. It includes a list of existing published procedures which is
however not exhaustive.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60172, Test procedure for the determination of the temperature index of enamelled
winding wires
IEC 60216-3, Electrical insulating materials – Thermal endurance properties – Part 3:
Instructions for calculating thermal endurance characteristics
IEC 60216-5, Electrical insulating materials – Thermal endurance properties – Part 5:
Determination of relative thermal endurance index (RTE) of an insulating material
IEC 60216-6, Electrical insulating materials – Thermal endurance properties – Part 6:
Determination of thermal endurance indices (TI and RTE) of an insulating material using the
fixed time frame method
IEC 60243-1, Electrical strength of insulating materials – Test methods – Part 1: Tests at
power frequencies
IEC 60317 (all parts), Specifications for particular types of winding wires
IEC 60370, Test procedure for thermal endurance of insulating varnishes – Electric strength
method
IEC 60371 (all parts), Specification for insulating materials based on mica
IEC 60394 (all parts), Varnished fabrics for electrical purposes
IEC 60450, Measurement of the average viscometric degree of polymerization of new and
aged cellulosic electrically insulating materials
IEC 60454 (all parts), Specifications for pressure-sensitive adhesive tapes for electrical
purposes

---------------------- Page: 11 ----------------------

60216-2  IEC:2005 – 11 –
IEC 60455 (all parts), Resin based reactive compounds used for electrical insulation
IEC 60464 (all parts), Varnishes used for electrical insulation
IEC 60554 (all parts), Specification for cellulosic papers for electrical purposes
IEC 60626 (all parts
...