SIST EN 60264-4-2:2001

Packaging of winding wires -- Part 4-2: Methods of test - Containers made from thermoplastic material for taper barrelled delivery spools

Describes the methods of test for containers made from thermoplastic material to be used for taper barrelled delivery spools for winding wires.

Verpackung von Wickeldrähten -- Teil 4-2: Prüfverfahren - Behälter aus thermoplastischem Werkstoff für Lieferspulen mit konischem Kern

Conditionnement des fils de bobinage -- Partie 4-2: Méthodes d'essai - Conteneurs faits de matériau thermoplastique pour bobines de livraison à fût de forme conique

Décrit les méthodes d'essai pour les containers faits de matériau thermoplastique, qui doivent être utilisés pour les bobines de livraison avec fût de forme conique destinées aux fils de bobinage.

Pakiranje navijalnih žic - 4-2. del: Preskusne metode - Zabojniki iz plastomerne snovi za dostavne tuljave s stožčastim jedrom

General Information

• Status: Published
• Publication Date: 31-Aug-2001
• ICS: 29.060.10 - Wires
• ICS: 55.060 - Spools. Bobbins
• Technical Committee: ETC - Electrotechnical technical committe
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2001
• Due Date: 01-Sep-2001
• Completion Date: 01-Sep-2001
• Ref Project: EN 60264-4-2:1994 - Packaging of winding wires - Part 4-2: Methods of test - Containers made from thermoplastic material for taper barrelled delivery spools

Relations

• Amended By: SIST EN 60264-4-2:2001/A1:2004 - Packaging of winding wires -- Part 4-2: Methods of test - Containers made from thermoplastic material for taper barrelled delivery spools
• Effective Date: 01-Sep-2004

Overview

SIST EN 60264-4-2:2001 is a European standard published by the CLC that specifies the methods of test for containers made from thermoplastic materials intended for taper barrelled delivery spools used in the packaging of winding wires. This standard ensures that the containers provide reliable and consistent protection and handling performance for winding wires during storage, transport, and usage.

The document primarily addresses testing procedures for assessing the quality and suitability of thermoplastic containers that house taper barrel shaped spools, a critical component in the electrical and manufacturing industries for wire winding applications.

Key Topics

• Scope of Testing Methods
  The standard outlines precise test methods to evaluate the physical and mechanical properties of thermoplastic containers designed for taper barrelled spools. This includes durability, impact resistance, dimensional stability, and compatibility with winding wire spools.

• Material Specification
  Focuses on thermoplastic materials used in container construction, ensuring they meet industry requirements for strength, resilience, and protection of the enclosed winding wires.

• Container Design for Tapered Spools
  Emphasizes design considerations specific to taper barrelled delivery spools, which have a conical shape to optimize wire distribution and unwinding performance.

• Quality Assurance
  Provides a basis for verifying container quality through standardized testing to maintain consistency across manufacturers and applications.

Applications

• Electrical Wire Packaging
  Used extensively in packaging winding wires such as enameled magnet wires, copper wires, and other conductive materials that require careful handling and storage.

• Industrial Manufacturing
  Supports production lines where winding wires must be delivered efficiently and protected from mechanical damage.

• Transportation and Storage
  Ensures that containers can withstand handling stresses during transport and provide protection against environmental and mechanical factors.

• Standardization in Supply Chains
  Facilitates interoperability and agreement on container performance between suppliers, manufacturers, and customers in the electrical wire industry.

Related Standards

• EN 60264-4: Part of the broader EN 60264 series covering packaging of winding wires and related testing methods.

• IEC 60264: International equivalents or references relating to packaging and handling of wire spools.

• Material Testing Standards: For thermoplastic containers, including impact resistance tests (e.g., ISO 179) and dimensional stability.

• Spool and Bobbin Standards: Related documents addressing standards for wire spools, bobbins, and cores used in winding wire applications.

---

This standard is essential for manufacturers, quality assurance professionals, and users involved in the packaging and delivery of winding wires. Adhering to SIST EN 60264-4-2:2001 ensures that containers made from thermoplastic materials meet rigorous quality benchmarks, promoting efficient, safe, and reliable handling of taper barrelled delivery spools. Keywords: thermoplastic containers, winding wire packaging, taper barrelled spools, packaging test methods, electrical wire containers, coil delivery systems.

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2001
3DNLUDQMHQDYLMDOQLKåLFGHO3UHVNXVQHPHWRGH=DERMQLNLL]SODVWRPHUQH
VQRYL]DGRVWDYQHWXOMDYHVVWRåþDVWLPMHGURP
Packaging of winding wires -- Part 4-2: Methods of test - Containers made from
thermoplastic material for taper barrelled delivery spools
Verpackung von Wickeldrähten -- Teil 4-2: Prüfverfahren - Behälter aus
thermoplastischem Werkstoff für Lieferspulen mit konischem Kern
Conditionnement des fils de bobinage -- Partie 4-2: Méthodes d'essai - Conteneurs faits
de matériau thermoplastique pour bobines de livraison à fût de forme conique
Ta slovenski standard je istoveten z: EN 60264-4-2:1994
ICS:
29.060.10 Žice Wires
55.060 Tulci. Vretena Spools. Bobbins
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---
...