SIST EN 60264-4-2:2001/A1:2004
(Amendment)Packaging of winding wires -- Part 4-2: Methods of test - Containers made from thermoplastic material for taper barrelled delivery spools
Packaging of winding wires -- Part 4-2: Methods of test - Containers made from thermoplastic material for taper barrelled delivery spools
Corrigendum to EN issued March 2005
Verpackung von Wickeldrähten -- Teil 4-2: Prüfverfahren - Behälter aus thermoplastischem Werkstoff für Lieferspulen mit konischem Kern
Conditionnement des fils de bobinage -- Partie 4-2: Méthodes d'essai - Conteneurs faits de matériau thermoplastique pour bobines de livraison à fût de forme conique
Pakiranje navijalnih žic - 4-2. del: Preskusne metode - Zabojniki iz plastomerne snovi za dostavne tuljave s stožčastim jedrom
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60264-4-
2:2001/A1:2004
STANDARD
september 2004
Pakiranje navijalnih žic - 4-2. del: Preskusne metode - Zabojniki iz
plastomerne snovi za dostavne tuljave s stožčastim jedrom
Packaging of winding wires - Part 4-2: Methods of test - Containers made from
thermoplastic material for taper barelled delivery spools
ICS 29.060.10; 55.060 Referenčna številka
SIST EN 60264-4-2:2001/A1:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60264-4-2/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2004
ICS 29.060.10
English version
Packaging of winding wires
Part 4-2: Methods of test –
Containers made from thermoplastic material
for taper barrelled delivery spools
(IEC 60264-4-2:1992/A1:2003)
Conditionnement des fils de bobinage Verpackung von Wickeldrähten
Partie 4-2: Méthodes d'essai – Teil 4-2: Prüfverfahren –
Conteneurs faits de matériau Behälter aus thermoplastischem Werkstoff
thermoplastique pour bobines de livraison für Lieferspulen mit konischem Kern
à fût de forme conique (IEC 60264-4-2:1992/A1:2003)
(CEI 60264-4-2:1992/A1:2003)
This amendment A1 modifies the European Standard EN 60264-4-2:1994; it was approved by CENELEC
on 2004-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60264-4-2:1994/A1:2004 E
---------------------- Page: 2 ----------------------
EN 60264-4-2:1994/A1:2004 - 2 -
Foreword
The text of document 55/872/FDIS, future amendment 1 to IEC 60264-4-2:1992, prepared by
IEC TC 55, Winding wir
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.