iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60598-2-20:1995

(Main)

Luminaires -- Part 2: Particular requirements -- Section 20: Lighting chains

Luminaires -- Part 2: Particular requirements -- Section 20: Lighting chains

Superseded by EN 60598-2-20:1997

Leuchten -- Teil 2: Besondere Anforderungen -- Hauptabschnitt 20: Lichtketten

Luminaires -- Partie 2: Règles particulières -- Section 20: Guirlandes lumineuses

Luminaires - Part 2: Particular requirements - Section 20: Lighting chains

General Information

Status
Withdrawn
Publication Date
28-Feb-1995
Withdrawal Date
30-Jun-1999
ICS
29.140.40 - Luminaires
Technical Committee
IESV - Lamps and related equipment
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jul-1999
Due Date
01-Jul-1999
Completion Date
01-Jul-1999
Directive
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
EN 60598-2-20:1991/A11:1992 - Luminaires - Part 2: Particular requirements - Section 20: Lighting chains

Relations

Replaced By
SIST EN 60598-2-20:1999 - Luminaires - Part 2-20: Particular requirements - Lighting chains (IEC 60598-2-20:1996, modified)
Effective Date
29-Jan-2023
Replaced By
SIST EN 60598-2-20:1999 - Luminaires - Part 2-20: Particular requirements - Lighting chains (IEC 60598-2-20:1996, modified)
Effective Date
06-May-2014

Buy Standard

EN 60598-2-20:1995EN 60598-2-20:1995
PreviousNext
Standard
EN 60598-2-20:1995
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60598-2-20:1995
01-marec-1995
Luminaires - Part 2: Particular requirements - Section 20: Lighting chains
Luminaires -- Part 2: Particular requirements -- Section 20: Lighting chains
Leuchten -- Teil 2: Besondere Anforderungen -- Hauptabschnitt 20: Lichtketten
Luminaires -- Partie 2: Règles particulières -- Section 20: Guirlandes lumineuses
Ta slovenski standard je istoveten z: EN 60598-2-20:1991/A11:1992
ICS:
29.140.40 Svetila Luminaires
SIST EN 60598-2-20:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60598-2-20:1995

---------------------- Page: 2 ----------------------

SIST EN 60598-2-20:1995

---------------------- Page: 3 ----------------------

SIST EN 60598-2-20:1995

---------------------- Page: 4 ----------------------

SIST EN 60598-2-20:1995

---------------------- Page: 5 ----------------------

SIST EN 60598-2-20:1995

---------------------- Page: 6 ----------------------

SIST EN 60598-2-20:1995

---------------------- Page: 7 ----------------------

SIST EN 60598-2-20:1995

---------------------- Page: 8 ----------------------

SIST EN 60598-2-20:1995

---------------------- Page: 9 ----------------------

SIST EN 60598-2-20:1995

---------------------- Page: 10 ----------------------

SIST EN 60598-2-20:1995

---------------------- Page: 11 ----------------------

SIST EN 60598-2-20:1995

---------------------- Page: 12 ----------------------

SIST EN 60598-2-20:1995

---------------------- Page: 13 ----------------------

SIST EN 60598-2-20:1995

---------------------- Page: 14 ----------------------

SIST EN 60598-2-20:1995

---------------------- Page: 15 ----------------------

SIST EN 60598-2-20:1995

---------------------- Pag
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50705:2023(Main)
Lighting equipment with radio communication - safety requirements
EN 50705:2023

This European Standard specifies safety requirements for LED lighting equipment with built-in radio equipment. Examples for LED lighting equipment are LED modules, LED retrofit lamps, LED luminaires and controlgear for LED light sources.
NOTE : With the radio equipment built into the LED lighting equipment, the LED lighting equipment itself becomes (combined) radio equipment with the whole combined radio equipment to be subject to the provisions of the RED

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62722-2-1:2023(Main)
Luminaire performance - Part 2-1: Particular requirements - LED luminaires (IEC 62722-2-1:2023)
EN IEC 62722-2-1:2023

IEC 62722-2-1:2023 specifies the performance requirements for LED luminaires, together with the test methods and conditions. It applies to LED luminaires for general lighting purposes. Semi-luminaires are not covered under the scope of this document. This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
alignment with IEC 62717:2014, IEC 62717:2014/AMD1:2015 and IEC 62717:2014/AMD2:2019;clarification of temperature requirements for the maintenance test, in 10.2 and Annex A; introduction of a new Annex C on methods for calculation and measurements of parameters for extension of electric and photometric data.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60598-2-18:2022(Main)
Luminaires - Part 2-18: Particular requirements - Luminaires for swimming pools and similar applications (IEC 60598-2-18:2022)
EN IEC 60598-2-18:2022

This part of IEC 60598 specifies requirements for fixed luminaires intended for use in the water, or in contact with the water, in, for example, the basins of swimming pools, fountains, paddling pools, and garden pools, for use with electric light sources.
NOTE Electrical installation rules for swimming pools are given in IEC 60364-7-702.
This document does not cover luminaires not in contact with the water (e.g. mounted behind a glass panel which is separate from the luminaire) or hand-held or portable luminaires.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60598-2-11:2013/A1:2022(Amendment)
Luminaires - Part 2-11: Particular requirements - Aquarium luminaires (IEC 60598-2-11:2013/AMD1:2022)
EN 60598-2-11:2013/A1:2022

No scope available

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62722-1:2022(Main)
Luminaire performance - Part 1: General requirements (IEC 62722-1:2022)
EN IEC 62722-1:2022

This part of IEC 62722 covers specific performance and environmental requirements for luminaires, incorporating electric light sources for operation from supply voltages up to 1 000 V. Unless otherwise detailed, performance data covered under the scope of this document are for the luminaires in a condition representative of new manufacture, with any specified initial aging procedures completed.
IEC 62722-1 covers requirements for luminaires to support energy efficient use and responsible environmental management to the end of life. The object of this Part 1 is to provide a set of requirements which are considered to be generally applicable to most types of luminaires. Where additional performance requirements for specific types of light source are relevant, these are specified in the IEC 62722-2 series. The IEC 62722-2 series can also cover a wider scope of performance aspects appropriate to the particular light source technology.
NOTE The structure of these performance standards also allows for the possibility of Part 3 of the IEC 62722 series to be introduced in the future should standardization of performance criteria linked to specific luminaire applications be determined as necessary (e.g. floodlighting, street lighting).
It is the intention that the requirements of this Part 1 are to be met by the provision of information and data provided by the luminaire manufacturer (or responsible vendor). Conformity is considered to be met by the provision of the requested information. Any verification of data is conducted by the measurement requirements of this document.
Semi-luminaires are not covered under the scope of this document.
For some types of luminaire (e.g. decorative or household) the provision of performance data under the scope of this document will not be appropriate.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60598-2-22:2022(Amendment)
Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting (IEC 60598-2-22:2021)
EN IEC 60598-2-22:2022

This part of IEC 60598 specifies requirements for emergency luminaires for use with electrical
lamps on emergency power supplies not exceeding 1 000 V.
This document does not cover the effects of non-emergency voltage reductions on luminaires
incorporating high pressure discharge lamps.
This document gives general requirements for emergency lighting equipment.
In this document, the term "lamp" which also includes "light source(s)" where appropriate, is
used.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60598-1:2021/A11:2022(Amendment)
Luminaires - Part 1: General requirements and tests
EN IEC 60598-1:2021/A11:2022

This Part 1 of IEC 60598 specifies general requirements for luminaires, incorporating electric light sources for operation from supply voltages up to 1 000 V. The requirements and related tests of this document cover: classification, marking, mechanical construction, electrical construction and photobiological safety.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60598-2-13:2007/A11:2021(Amendment)
Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires
EN 60598-2-13:2006/A11:2021

No Scope available

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60598-2-1:2021(Main)
Luminaires. Part 2: Particular requirements - Fixed general purpose luminaires (IEC 60598-2-1:2020)
EN IEC 60598-2-1:2021

This part of IEC 60598 specifies requirements for fixed general purpose luminaires for use
with electric light sources on supply voltages not exceeding 1 000 V.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60598-1:2021(Amendment)
Luminaires - Part 1: General requirements and tests (IEC 60598-1:2020)
EN IEC 60598-1:2021

This Part 1 of IEC 60598 specifies general requirements for luminaires, incorporating electric
light sources for operation from supply voltages up to 1 000 V. The requirements and related
tests of this document cover: classification, marking, mechanical construction, electrical
construction and photobiological safety.
Each section of this Part 1 is read in conjunction with this Section 0 and with other relevant
sections to which reference is made.
Each part of IEC 60598-2 details requirements for a particular type of luminaire or group of
luminaires on supply voltages not exceeding 1 000 V. These parts are published separately
for ease of revision and additional sections will be added as and when a need for them is
recognized.
The presentation of photometric data for luminaires is under consideration by the International
Commission on Illumination (CIE) and is not, therefore, included in this Part 1.
Requirements are included in this Part 1 for luminaires incorporating ignitors with nominal
peak values of the voltage pulse not exceeding those of Table 11.2. The requirements apply
to luminaires with ignitors built into ballasts and to luminaires with ignitors separate from
ballasts. For luminaires with ignitors built into lamps, the requirements are under
consideration.
Requirements for semi-luminaires are included in this Part 1.
In general, this Part 1 covers safety requirements for luminaires. The object of this Part 1 is to
provide a set of requirements and tests which are considered to be generally applicable to
most types of luminaires and which can be called up as required by the detail specifications of
IEC 60598-2. This Part 1 is thus not regarded as a specification in itself for any type of
luminaire, and its provisions apply only to particular types of luminaires to the extent
determined by the appropriate part of IEC 60598-2.
The parts of IEC 60598-2, in making reference to any of the sections of Part 1, specify the
extent to which that section is applicable and the order in which the tests are performed; they
also include additional requirements as necessary.
The order in which the sections of Part 1 are numbered has no particular significance as the
order in which their provisions apply is determined for each type of luminaire or group of
luminaires by the appropriate part of IEC 60598-2. All parts of IEC 60598-2 are self-contained
and therefore do not contain references to other parts of IEC 60598-2.
Where the requirements of any of the sections of Part 1 are referred to in the parts of
IEC 60598-2 by the phrase "The requirements of section... of IEC 60598-1 apply", this phrase
is interpreted as meaning that all the requirements of that section of Part 1 apply except those
which are clearly inapplicable to the particular type of luminaire covered by that part of
IEC 60598-2.
For explosion proof luminaires, as covered by IEC 60079, the requirements of IEC 60598
(selecting the appropriate parts 2) are applied in addition to the requirements of IEC 60079. In
the event of any conflict between IEC 60598 and IEC 60079, the requirements of IEC 60079
take priority.
Improvements in safety to take into account the state of the art technology are incorporated in
the standards with revisions and amendments on an ongoing basis. Regional standardization
bodies can include statements in their derived standards to cover products which have
complied with the previous document as shown by the manufacturer or standardization body.
The statements may require that for such products, the previous standard may continue to
apply to production until a defined date after which the new standard shall apply.

  • Standard
    239 pages
    English language
    sale 10% off
    e-Library read for
    1 day