oSIST prEN IEC 63553:2025
(Main)Fully flexible organic light emitting diode (OLED) panels for general lighting - Performance requirements
Fully flexible organic light emitting diode (OLED) panels for general lighting - Performance requirements
Popolnoma upogljive plošče iz organskih svetlečih diod (OLED) za splošno razsvetljavo - Zahtevane lastnosti
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2025
Popolnoma upogljive plošče iz organskih svetlečih diod (OLED) za splošno
razsvetljavo - Zahtevane lastnosti
Fully flexible organic light emitting diode (OLED) panels for general lighting -
Performance requirements
Ta slovenski standard je istoveten z: prEN IEC 63553:2025
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
34A/2455/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 63553 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2025-07-11 2025-10-03
SUPERSEDES DOCUMENTS:
34A/2410/CD, 34A/2426A/CC
IEC SC 34A : ELECTRIC LIGHT SOURCES
SECRETARIAT: SECRETARY:
United Kingdom Mr Petar Luzajic
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Fully flexible Organic Light Emitting Diode (OLED) panels for general lighting - Performance
requirements
PROPOSED STABILITY DATE: 2029
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
IEC CDV 63553 @ IEC 2025
1 Contents
3 FOREWORD . 2
4 1 Scope. 3
5 2 Normative references . 3
6 3 Terms and Definitions . 3
7 4 General statement and test conditions. 4
8 4.1 General . 4
9 4.2 General test conditions . 4
10 4.3 Stabilization . 4
11 4.3.1 General requirements for stabilization . 4
12 4.3.2 Current-driven stabilization . 4
13 4.3.3 Voltage-driven stabilization . 4
14 5 Marking . 5
15 5.1 Marking parameters . 5
16 5.2 Information on reliability of electrical connection . 5
17 6 Initial photometric and electrical characteristics . 5
18 6.1 General . 5
19 6.2 Input power . 6
20 6.3 Luminous flux . 6
21 6.4 Luminous efficacy . 6
22 6.5 Chromaticity coordinates . 6
23 6.6 Correlated colour temperature (CCT) . 6
24 6.7 Colour rendering index (CRI) . 7
25 6.8 Average luminance . 7
26 6.8.1 Initial average luminance (flat configuration) . 7
27 6.8.2 Initial average luminance (bent configuration) . 7
28 6.9 Luminance uniformity . 7
29 6.10 Luminous intensity distribution . 7
30 7 Maintained photometric characteristics . 8
31 7.1 General . 8
32 7.2 Luminous flux maintenance . 8
33 7.3 Maintained operating voltage . 8
34 7.4 Maintained chromaticity coordinates . 8
35 8 Reliability . 8
36 8.1 General . 8
37 8.2 High temperature and high humidity operation test . 8
38 8.3 High temperature and high humidity storage test . 9
39 8.4 Reliability of connection . 9
40 Annex A(informative) Measuring methods for bent configurations . 11
IEC CDV 63553 @ IEC 2025
41 INTERNATIONAL ELECTROTECHNICAL COMMISSION
42 ____________
44 FULLY FLEXIBLE ORGANIC LIGHT EMITTING DIODE (OLED) PANELS
45 FOR GENERAL LIGHTING – PERFORMANCE REQUIREMENTS
47 FOREWORD
48 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national
49 electrotechnical committees (IEC National Committees). The object of IEC is to promote international co -operation on all
50 questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities ,
51 IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS)
52 and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC
53 National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental
54 and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with
55 the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between
56 the two organizations.
57 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus
58 of opinion on the relevant subjects since each technical committee has representation from all interested IEC National
59 Committees.
60 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in
61 that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC
62 cannot be held responsible for the way in which they are used or for any misinterpretation by any end user.
63 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to
64 the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and
65 the corresponding national or regional publication shall be clearly indicated in the latter.
66 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment
67 services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by
68 independent certification bodies.
69 6) All users should ensure that they have the latest edition of this publication.
70 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of
71 its technical committees and IEC National Committees for any personal injury, property damage or other damage of any
72 nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publicatio n,
73 use of, or reliance upon, this IEC Publication or any other IEC Publications.
74 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable
75 for the correct application of this publication.
76 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights.
77 IEC shall not be held responsible for identifying any or all such patent rights.
78 International Standard IEC XXXXX has been prepared by subcommittee SC34A: Electric light sources,
79 of IEC technical committee 34: Lighting.
80 The text of this standard is based on the following documents:
FDIS Report on voting
XX/XX/FDIS XX/XX/RVD
82 Full information on the voting for the approval of this standard can be found in the report on voting
83 indicated in the above table.
84 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
IEC CDV 63553 @ IEC 2025
86 FULLY FLEXIBLE ORGANIC LIGHT EMITTING DIODE (OLED) PANELS FOR GENERAL
87 LIGHTING – PERFORMANCE REQUIREMENTS
88 1 Scope
89 This document specifies performance requirements of fully flexible organic light emitting diode
90 (OLED) tiles and panels whose configurations are twisted, wavy or helical for use on supplies
91 up to 120 V ripple free DC for indoor and similar general lighting purposes and designed for
92 being bent during the manufacturing process of curved luminaires.
93 The requirements of this document relate only to type testing.
95 2 Normative references
96 The following document is referred to in the text in such a way that some or all of their content
97 constitutes requirements of this document. For dated references, only the edition cited applies.
98 For undated references, the latest edition of the referenced document (including any
99 amendments) applies.
100 IEC 62504, General lighting – Light emitting diode (LED) products and related equipment –
101 Terms and definitions
102 IEC 62868-2-3, Organic light emitting diode (OLED) light sources for general lighting – Safety
103 – Part 2-3: Particular requirements – Flexible OLED tiles and panels
104 IEC 62922:2016, Organic light emitting diode (OLED)panels for general lighting – Performance
105 requirements –
106 IEC 62922:2016/AMD1:2021
107 IEC TS 62972, General lighting – Organic light emitting diode (OLED) products and related
108 equipment – Terms and definitions
109 IEC 63286:2022, Flexible organic light emitting diode (OLED)panels for general lighting –
110 Performance requirements –
111 CIE 025:2015, Test Method for LED Lamps, LED Luminaires and LED Modules
112 CIE S 025-SP1:2019, Test Method for OLED Luminaires and OLED Light Sources
113 3 Terms and Definitions
114 For the purposes of this document, the terms and definitions given in IEC 62504, IEC 62868-1
115 and IEC TS 62972 and the following apply.
116 ISO and IEC maintain terminological databases for use in standardization at the following
117 addresses:
118 • IEC Electropedia: available at http://www.electropedia.org/
119 • ISO Online browsing platform: available at http://www.iso.org/obp
IEC CDV 63553 @ IEC 2025
121 3.1
122 fully flexible OLED panel
123 flexible OLED panel with freely bending shapes of geometrical curvature
125 3.2
126 wavy shape OLED panel
127 flexible OLED panel whose light emitting surface forms a combined configuration of convex and concave
128 shapes
130 3.3
131 twisted shape OLED panel
132 flexible OLED panel in which the light emitting surface forms a helix around the panel axis
134 3.4
135 helical shape OLED panel
136 flexible OLED panel whose light emitting surfaces have shapes generated by equiangular spirals having
137 a common axis and the same defining parameter
139 4 General statement and test conditions
140 4.1 General
141 The requirements of this document apply in addition to
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.