SIST EN ISO 14268:2013
(Main)Leather - Physical and mechanical tests - Determination of water vapour permeability (ISO 14268:2012)
Leather - Physical and mechanical tests - Determination of water vapour permeability (ISO 14268:2012)
This International Standard describes a method for determining the water vapour permeability of leather and provides alternative methods of sample preparation.
Leder - Physikalische und mechanische Prüfungen - Bestimmung der Wasserdampfdurchlässigkeit (ISO 14268:2012)
Diese Internationale Norm legt ein Verfahren zur Bestimmung der Wasserdampfdurchlässigkeit von Leder fest und gibt alternative Verfahren für die Probenvorbereitung an. Das Verfahren ist für alle Leder mit Dicken von weniger als 3,0 mm anwendbar.
Cuir - Essais physiques et mécaniques - Détermination de la perméabilité à la vapeur d'eau (ISO 14268:2012)
L'ISO 14268:2012 décrit une méthode de détermination de la perméabilité du cuir à la vapeur d'eau et fournit plusieurs méthodes de préparation de l'échantillon.
Usnje - Fizikalni in mehanski preskusi - Ugotavljanje prepustnosti vodne pare (ISO 14268:2012)
Ta mednarodni standard opisuje metodo za ugotavljanje prepustnosti vodne pare za usnje in določa alternativne metode priprave vzorcev.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 14268:2013
01-november-2013
1DGRPHãþD
SIST EN ISO 14268:2003
Usnje - Fizikalni in mehanski preskusi - Ugotavljanje prepustnosti vodne pare (ISO
14268:2012)
Leather - Physical and mechanical tests - Determination of water vapour permeability
(ISO 14268:2012)
Leder - Physikalische und mechanische Prüfungen - Bestimmung der
Wasserdampfdurchlässigkeit (ISO 14268:2012)
Cuir - Essais physiques et mécaniques - Détermination de la perméabilité à la vapeur
d'eau (ISO 14268:2012)
Ta slovenski standard je istoveten z: EN ISO 14268:2012
ICS:
59.140.30 Usnje in krzno Leather and furs
SIST EN ISO 14268:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 14268:2013
---------------------- Page: 2 ----------------------
SIST EN ISO 14268:2013
EUROPEAN STANDARD
EN ISO 14268
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2012
ICS 59.140.30 Supersedes EN ISO 14268:2002
English Version
Leather - Physical and mechanical tests - Determination of water
vapour permeability (ISO 14268:2012)
Cuir - Essais physiques et mécaniques - Détermination de Leder - Physikalische und mechanische Prüfungen -
la perméabilité à la vapeur d'eau (ISO 14268:2012) Bestimmung der Wasserdampfdurchlässigkeit (ISO
14268:2012)
This European Standard was approved by CEN on 31 October 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14268:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 14268:2013
EN ISO 14268:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 14268:2013
EN ISO 14268:2012 (E)
Foreword
This document (EN ISO 14268:2012) has been prepared by Technical Committee CEN/TC 289 “Leather”, the
secretariat of which is held by UNI, in collaboration with the International Union of Leather Technologists and
Chemists Societies.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2013, and conflicting national standards shall be withdrawn at the
latest by May 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14268:2002.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 14268:2013
---------------------- Page: 6 ----------------------
SIST EN ISO 14268:2013
INTERNATIONAL ISO
STANDARD 14268
IULTCS/IUP
15
Second edition
2012-11-01
Leather — Physical and mechanical
tests — Determination of water vapour
permeability
Cuir — Essais physiques et mécaniques — Détermination de
la perméabilité à la vapeur d'eau
Reference number
ISO 14268:2012(E)
IULTCS/IUP 15:2012(E)
©
ISO 2012
---------------------- Page: 7 ----------------------
SIST EN ISO 14268:2013
ISO 14268:2012(E)
IULTCS/IUP 15:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 14268:2013
ISO 14268:2012(E)
IULTCS/IUP 15:2012(E)
Contents Page
Foreword . iv
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Apparatus . 1
5 Sampling and sample preparation . 2
6 Procedure . 3
7 Expression of results . 4
8 Test report . 4
Annex A (informative) Sources of apparatus . 5
Annex B (informative) Water vapour number . 6
Bibliography . 7
© ISO 2012 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 14268:2013
ISO 14268:2012(E)
IULTCS/IUP 15:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 14268 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 289, Leather, in collaboration with the Physical Tests Commission of the International Union of
Leather Technologists and Chemists Societies (IUP Commission, IULTCS), in accordance with the Agreement
on technical cooperation between ISO and CEN (Vienna Agreement).
The first edition was based on IUP 15 originally published in J. Soc. Leather Trades Chemists, 44, p. 502,
(1960) and declared an official method of the IULTCS in 1961. An updated version was published in J. Soc.
Leather Tech. Chem., 82, p. 234, (1998) and a further revision published in J. Soc. Leather Tech. Chem., 84,
p. 353, (2000) and reconfirmed as an official method in March 2001.
This second edition cancels and replaces the first edition (ISO 14268:2002), which has been technically
revised.
IULTCS, originally formed in 1897, is a worldwide organization of professional leather societies to further the
advancement of leather science and technology. IULTCS has three Commissions, which are responsible for
establishing international methods for the sampling and testing of leather. ISO recognizes IULTCS as an
international standardizing body for the preparation of test methods for leather.
iv © ISO 2012 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 14268:2013
ISO 14268:2012(E)
INTERNATIONAL STANDARD
IULTCS/IUP 15:2012(E)
Leather — Physical and mechanical tests — Determination of
water vapour permeability
1 Scope
This International Standard describes a method for determining the water vapour permeability of leather and
provides alternative methods of sample preparation.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.