SIST EN 300 113-2 V1.2.1:2003
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
General Information
- Abstract
To incorporate the text and tables corresponding to the sought change of status of the standard Harmonised STandard referencing article 3.2 of the R&TTE Directive
- Status
- Published
- Publication Date
- 31-Mar-2003
- Withdrawal Date
- 31-Aug-2001
- Technical Committee
- RES - Radio equipment and systems
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Apr-2003
- Due Date
- 01-Apr-2003
- Completion Date
- 01-Apr-2003
- Mandate
- M/284
Overview
SIST EN 300 113-2 V1.2.1:2003 is a harmonized European standard developed by the Slovenian Institute for Standardization (SIST) and maintained by the European Telecommunications Standards Institute (ETSI). This standard addresses electromagnetic compatibility (EMC) and radio spectrum matters (ERM) for land mobile radio equipment designed for the transmission of data and/or speech, using both constant and non-constant envelope modulation and equipped with an antenna connector. SIST EN 300 113-2 covers essential requirements under article 3.2 of the R&TTE Directive (Directive 1999/5/EC), which focuses on the effective use of radio spectrum and avoidance of harmful interference.
This standard is intended to ensure both compliance with European regulatory requirements and technical interoperability for manufacturers developing mobile radio equipment for the land mobile service, including base stations, mobile stations, and certain hand portable devices.
Key Topics
Essential subject areas covered by SIST EN 300 113-2 V1.2.1:2003 include:
- Scope of Equipment: Applies to radio equipment operating between 30 MHz and 1 GHz, with channel separations of 12.5 kHz, 20 kHz, and 25 kHz, designed for data and/or speech communication.
- Types of Devices: Includes base stations (fixed), mobile stations (vehicle-based or portable), and specific hand portable radios with accessible antenna connectors.
- Technical Performance Requirements: Defines performance and testing requirements to ensure:
- Frequency stability
- Output power and radiated power
- Adjacent channel power limitations
- Control of spurious emissions and intermodulation
- Receiver sensitivity, selectivity, and rejection of interference
- Testing and Compliance: Sets out procedures for environmental testing, measurement uncertainties, and compliance assessment, ensuring consistency across EU member states.
- Harmonization with EU Law: Specifically references Article 3.2 of the R&TTE Directive, ensuring that products conform with legal requirements for market access in the European Economic Area.
Applications
SIST EN 300 113-2 V1.2.1:2003 is used by:
- Manufacturers and Engineers: To design, test, and certify land mobile radio devices for use in professional, commercial, and emergency services.
- Conformity Assessment Bodies: For product evaluation and CE marking, demonstrating compliance with essential requirements for radio spectrum use and EMC.
- Regulatory Authorities: For market surveillance and interference mitigation in the radio spectrum.
- Product Developers: To ensure interoperability and compatibility of digital and analogue-digital radio transceivers within standardized spectrum allocations.
Typical deployments include:
- Public safety and emergency communication networks
- Commercial vehicle fleets and logistics communication
- Industrial wireless control applications
- Utility and service provider dispatch systems
Related Standards
For holistic compliance and optimized product design, organizations should consider the following related standards:
- EN 300 113-1 (V1.4.1): Technical characteristics and methods of measurement for land mobile radio equipment
- ETSI TR 100 028 (V1.3.1): Measurement uncertainties for mobile radio equipment
- EN 301 489 series: EMC requirements for radio equipment and services
- Low Voltage Directive (LVD) 73/23/EEC and EMC Directive 89/336/EEC for additional safety and electromagnetic compatibility requirements
Adhering to SIST EN 300 113-2 V1.2.1 ensures harmonized access to the EU market, reduces the risk of harmful interference, and supports reliable performance of land mobile radio applications across Europe. This standard is essential for anyone involved in the design, certification, or deployment of land mobile communications equipment using modulated RF signals.
Relations
- Effective Date
- 17-Nov-2009
Get Certified
Connect with accredited certification bodies for this standard

ANCE
Mexican certification and testing association.

Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 300 113-2 V1.2.1:2003 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility and Radio spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive". This standard covers: To incorporate the text and tables corresponding to the sought change of status of the standard Harmonised STandard referencing article 3.2 of the R&TTE Directive
To incorporate the text and tables corresponding to the sought change of status of the standard Harmonised STandard referencing article 3.2 of the R&TTE Directive
SIST EN 300 113-2 V1.2.1:2003 is classified under the following ICS (International Classification for Standards) categories: 33.060.99 - Other equipment for radiocommunications; 33.070.01 - Mobile services in general; 33.100.01 - Electromagnetic compatibility in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 300 113-2 V1.2.1:2003 has the following relationships with other standards: It is inter standard links to SIST EN 300 113-2 V1.3.1:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 300 113-2 V1.2.1:2003 is associated with the following European legislation: Standardization Mandates: M/284. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 300 113-2 V1.2.1:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.070.01Mobilni servisi na splošnoMobile services in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 300 113-2 Version 1.2.1SIST EN 300 113-2 V1.2.1:2003en01-april-2003SIST EN 300 113-2 V1.2.1:2003SLOVENSKI
STANDARD
ETSIEN300113-2V1.2.1(2002-04)CandidateHarmonizedEuropeanStandard(Telecommunicationsseries)ElectromagneticcompatibilityandRadiospectrumMatters(ERM);Landmobileservice;Radioequipmentintendedforthetransmissionofdata(and/orspeech)usingconstantornon-constantenvelopemodulationandhavinganantennaconnector;Part2:HarmonizedENcoveringessentialrequirementsunderarticle3.2oftheR&TTEDirectiveSIST EN 300 113-2 V1.2.1:2003
ETSIETSIEN300113-2V1.2.1(2002-04)2ReferenceREN/ERM-RP02-054-2Keywordsantenna,data,radio,regulation,speech,mobile,PMRETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://portal.etsi.org/tb/status/status.aspIfyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2002.Allrightsreserved.DECTTM,PLUGTESTSTMandUMTSTMareTradeMarksofETSIregisteredforthebenefitofitsMembers.TIPHONTMandtheTIPHONlogoareTradeMarkscurrentlybeingregisteredbyETSIforthebenefitofitsMembers.3GPPTMisaTradeMarkofETSIregisteredforthebenefitofitsMembersandofthe3GPPOrganizationalPartners.SIST EN 300 113-2 V1.2.1:2003
ETSIETSIEN300113-2V1.2.1(2002-04)3ContentsIntellectualPropertyRights.5Foreword.5Introduction.61Scope.82References.83Definitions,symbolsandabbreviations.93.1Definitions.93.2Symbols.93.3Abbreviations.94Technicalspecifications.94.1Environmentalprofile.94.2Transmitterrequirements.94.2.1Frequencyerror.94.2.1.1Definition.94.2.1.2Limit.94.2.1.3Methodofmeasurement.94.2.2Carrierpower(conducted).94.2.2.1Definition.94.2.2.2Limit.94.2.2.3Methodofmeasurement.104.2.3Effectiveradiatedpower.104.2.3.1Definition.104.2.3.2Limit.104.2.3.3Methodofmeasurement.104.2.4Adjacentchannelpower.104.2.4.1Definition.104.2.4.2Limit.104.2.4.3Methodofmeasurement.104.2.5Spuriousemissions.104.2.5.1Definition.104.2.5.2Limit.104.2.5.3Methodofmeasurement.104.2.6Intermodulationattenuation.104.2.6.1Definition.104.2.6.2Limit.104.2.6.3Methodofmeasurement.114.2.7Transmitterattacktime.114.2.7.1Definition.114.2.7.2Limit.114.2.7.3Methodofmeasurement.114.2.8Transmitterreleasetime.114.2.8.1Definition.114.2.8.2Limit.114.2.8.3Methodofmeasurement.114.2.9Transientfrequencybehaviourofthetransmitter.114.2.9.1Definition.114.2.9.2Limit.114.2.9.3Methodofmeasurement.114.3Receiverrequirements.114.3.1Sensitivity(dataormessages).114.3.1.1Definition.114.3.1.2Limit.124.3.1.3Methodofmeasurement.12SIST EN 300 113-2 V1.2.1:2003
ETSIETSIEN300113-2V1.2.1(2002-04)44.3.2Co-channelrejection.124.3.2.1Definition.124.3.2.2Limit.124.3.2.3Methodofmeasurement.124.3.3Adjacentchannelselectivity.124.3.3.1Definition.124.3.3.2Limit.124.3.3.3Methodofmeasurement.124.3.4Spuriousresponserejection.124.3.4.1Definition.124.3.4.2Limit.124.3.4.3Methodofmeasurement.124.3.5Intermodulationresponserejection.124.3.5.1Definition.124.3.5.2Limit.134.3.5.3Methodofmeasurement.134.3.6Blockingordesensitization.134.3.6.1Definition.134.3.6.2Limit.134.3.6.3Methodofmeasurement.134.3.7Spuriousradiations.134.3.7.1Definition.134.3.7.2Limit.134.3.7.3Methodofmeasurement.134.3.8Desensitizationandsensitivity(duplex).134.3.8.1Definition.134.3.8.2Limit.134.3.8.3Methodofmeasurement.134.3.9Spuriousresponserejection(duplex).134.3.9.1Definition.134.3.9.2Limit.144.3.9.3Methodsofmeasurement.145Testingforcompliancewithtechnicalrequirements.145.1Environmentalconditionsfortesting.145.1.1Normalandextremetest-conditions.145.1.2Testpowersource.145.1.3Choiceofsamplesfortestsuites.145.2Interpretationofthemeasurementresults.145.3Essentialradiotestsuites.155.3.1Frequencyerror.155.3.2Carrierpower(conducted).155.3.3Effectiveradiatedpower.155.3.4Adjacentchannelpower.155.3.5Spuriousemissions.155.3.6Intermodulationattenuation.155.3.7Transmitterattacktime.155.3.8Transmitterreleasetime.155.3.9Transientfrequencybehaviourofthetransmitter.165.4Otherradiotestsuites.165.4.1Sensitivity(dataormessages).165.4.2Co-channelrejection.165.4.3Adjacentchannelselectivity.165.4.4Spuriousresponserejection.165.4.5Intermodulationresponserejection.165.4.6Blockingordesensitization.165.4.7Spuriousradiations.165.4.8Desensitizationandsensitivity(duplex).165.4.9Spuriousresponserejection(dupl
...



