SIST EN 300 113-2:2002

• Abstract:

  To incorporate the text and tables corresponding to the sought change of status of the standard

• Status: Published
• Publication Date: 31-Oct-2002
• ICS: 33.060.99 - Other equipment for radiocommunications
• ICS: 33.070.01 - Mobile services in general
• ICS: 33.100.01 - Electromagnetic compatibility in general
• Technical Committee: RES - Radio equipment and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Nov-2002
• Due Date: 01-Nov-2002
• Completion Date: 01-Nov-2002
• Mandate: M/284
• Ref Project: ETSI EN 300 113-2 V1.1.1 (2001-03) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and speech) and having an antenna connector; Part 2: Harmonised EN covering essential requirements under article 3.2 of the R&TTE Directive

Overview

SIST EN 300 113-2:2002 is a harmonized European standard that addresses electromagnetic compatibility and radio spectrum requirements for land mobile radio equipment intended for the transmission of data and speech, equipped with an antenna connector. This standard, adopted by the Slovenian Institute for Standardization (SIST), covers essential requirements under Article 3.2 of the R&TTE Directive (Directive 1999/5/EC), which mandates that radio equipment effectively utilizes the allocated spectrum and avoids harmful interference.

This document applies to digital and combined analogue/digital land mobile radio equipment operating in the frequency range of 30 MHz to 1 GHz, with channel separations of 12.5 kHz, 20 kHz, and 25 kHz-ensuring the proper use of the radio spectrum and compliance with broader electromagnetic compatibility (EMC) requirements.

Key Topics

• Scope of Application: This standard applies to base stations, mobile stations, and certain portable stations used for land mobile services, particularly those with an antenna connector.
• Technical Requirements: It sets requirements for transmitter parameters such as frequency error, carrier power, effective radiated power, adjacent channel power, spurious emissions, and intermodulation attenuation. For receivers, requirements include sensitivity, co-channel rejection, adjacent channel selectivity, and spurious response rejection.
• Compliance with the R&TTE Directive: The standard ensures that equipment within its scope meets the essential requirements for efficient spectrum use, helping manufacturers demonstrate conformity under European legislation.
• Environmental Profiles: Equipment must comply with these requirements under specified environmental conditions as outlined in relevant environmental classes.
• Testing and Measurement: Clear guidance is provided for testing procedures, interpretation of results, and uncertainty of measurements, referencing EN 300 113-1 for detailed methodologies.

Applications

SIST EN 300 113-2:2002 is crucial for manufacturers, testing laboratories, and conformity assessment bodies involved in the certification and deployment of land mobile radio equipment within Europe and other regions adopting similar EMC and spectrum regulations. Typical application areas include:

• Public Safety Communications: Used in police, fire, and emergency services radio networks to ensure reliable and interference-free communication.
• Transportation and Utility Services: Supports secure and efficient operations for fleets, logistics, and field service teams using mobile or portable radio equipment.
• Industrial and Commercial Sectors: Facilitates compliance for equipment used in factories, warehouses, and on construction sites where efficient and clear mobile communications are essential.

By adhering to this harmonized standard, manufacturers can streamline market access within the European Union and foster trust in the performance and reliability of their products.

Related Standards

When implementing or certifying equipment to SIST EN 300 113-2:2002, consider the following related standards and documents for comprehensive compliance:

• EN 300 113-1: Defines the technical characteristics and measurement methods for land mobile service radio equipment. SIST EN 300 113-2 references its definitions, limits, and test methodologies extensively.
• Directive 1999/5/EC (R&TTE Directive): The primary regulatory framework for radio equipment in Europe, setting out essential requirements for safety, EMC, and efficient spectrum use.
• ETSI ETR 028: Provides methodologies for estimating and reporting uncertainty in the measurement of mobile radio equipment characteristics.
• Other related EMC and radio standards: Depending on the specific function, frequency, or region, additional harmonized standards may apply for aspects such as human exposure to electromagnetic fields or acoustic safety.

Keywords: electromagnetic compatibility, radio spectrum, land mobile service, data transmission, speech transmission, antenna connector, R&TTE Directive, harmonized standard, ETSI, conformity assessment, public safety communications, testing requirements.

SLOVENSKI STANDARD
3SIST EN 300 113-2:2002
01-VHSWHPEHU-2002
(OHNWURPDJQHWQD]GUXåOMLYRVW(0&LQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50
6WRULWHYNRSHQVNLKPRELOQLKNRPXQLNDFLM5DGLMVNDRSUHPD]DSUHQRVSRGDWNRY
LQJRYRUDNLLPDDQWHQVNLSULNOMXþHNGHO+DUPRQL]LUDQL(1NL]DMHPD
ELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM); Land mobile service;
Radio equipment intended for the transmission of data (and speech) and having an
antenna connector; Part 2: Harmonised EN covering essential requirements under article
3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 300 113-2 Version 1.1.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.070.01 Mobilni servisi na splošno Mobile services in general
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
36IST EN 300 113-2:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

Candidate Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Land mobile service;
Radio equipment intended for the transmission
of data (and speech) and having an antenna connector;
Part 2: Harmonized EN covering essential requirements
under article 3.2 of the R&TTE Directive

2 ETSI EN 300 113-2 V1.1.1 (2001-03)
Reference
REN/ERM-RP02-040-2
Keywords
antenna, data, radio, regulation, speech, mobile,
PMR
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone] Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2001.
All rights reserved.
ETSI
3 ETSI EN 300 113-2 V1.1.1 (2001-03)
Contents
Intellectual Property Rights .6
Foreword.6
Introduction.7
1 Scope.9
2 References.9
3 Definitions, symbols and abbreviations .10
3.1 Definitions . 10
3.2 Symbols . 10
3.3 Abbreviations. 10
4 Technical specifications.10
4.1 Environmental profile. 10
4.2 Transmitter requirements. 10
4.2.1 Frequency error. 10
4.2.1.1 Definition. 10
4.2.1.2 Limit. 10
4.2.1.3 Method of measurement. 10
4.2.2 Carrier power (conducted). 10
4.2.2.1 Definition. 10
4.2.2.2 Limit. 10
4.2.2.3 Method of measurement. 11
4.2.3 Effective radiated power . 11
4.2.3.1 Definition. 11
4.2.3.2 Limit. 11
4.2.3.3 Method of measurement. 11
4.2.4 Adjacent channel power . 11
4.2.4.1 Definition. 11
4.2.4.2 Limit. 11
4.2.4.3 Method of measurement. 11
4.2.5 Spurious emissions. 11
4.2.5.1 Definition. 11
4.2.5.2 Limit. 11
4.2.5.3 Method of measurement. 11
4.2.6 Intermodulation attenuation. 11
4.2.6.1 Definition. 11
4.2.6.2 Limit. 11
4.2.6.3 Method of measurement. 12
4.2.7 Transmitter attack time. 12
4.2.7.1 Definition. 12
4.2.7.2 Limit. 12
4.2.7.3 Method of measurement. 12
4.2.8 Transmitter release time. 12
4.2.8.1 Definition. 12
4.2.8.2 Limit. 12
4.2.8.3 Method of measurement. 12
4.2.9 Transient frequency behaviour of the transmitter . 12
4.2.9.1 Definition. 12
4.2.9.2 Limit. 12
4.2.9.3 Method of measurement. 12
4.3 Receiver requirements. 12
4.3.1 Sensitivity (data or messages). 12
4.3.1.1 Definition. 12
4.3.1.2 Limit. 13
4.3.1.3 Method of measurement. 13
ETSI
4 ETSI EN 300 113-2 V1.1.1 (2001-03)
4.3.2 Co-channel rejection. 13
4.3.2.1 Definition. 13
4.3.2.2 Limit. 13
4.3.2.3 Method of measurement. 13
4.3.3 Adjacent channel selectivity. 13
4.3.3.1 Definition. 13
4.3.3.2 Limit. 13
4.3.3.3 Method of measurement. 13
4.3.4 Spurious response rejection . 13
4.3.4.1 Definition. 13
4.3.4.2 Limit. 13
4.3.4.3 Method of measurement. 13
4.3.5 Intermodulation response rejection . 13
4.3.5.1 Definition. 13
4.3.5.2 Limit. 14
4.3.5.3 Method of measurement. 14
4.3.6 Blocking or desensitization . 14
4.3.6.1 Definition. 14
4.3.6.2 Limit. 14
4.3.6.3 Method of measurement. 14
4.3.7 Spurious radiations. 14
4.3.7.1 Definition. 14
4.3.7.2 Limit. 14
4.3.7.3 Method of measurement. 14
4.3.8 Desensitization and sensitivity (duplex). 14
4.3.8.1 Definition. 14
4.3.8.2 Limit. 14
4.3.8.3 Method of measurement. 14
4.3.9 Spurious response rejection (duplex) . 14
4.3.9.1 Definition. 14
4.3.9.2 Limit. 15
4.3.9.3 Methods of measurement. 15
5 Testing for compliance with technical requirements .15
5.1 Environmental conditions for testing. 15
5.1.1 Normal and extreme test-conditions. 15
5.1.2 Test power source . 15
5.1.3 Choice of samples for test suites. 15
5.2 Interpretation of the measurement results. 15
5.3 Essential radio test suites . 16
5.3.1 Frequency error. 16
5.3.2 Carrier power (conducted). 16
5.3.3 Effective radiated power . 16
5.3.4 Adjacent channel power . 16
5.3.5 Spurious emissions. 16
5.3.6 Intermodulation attenuation. 16
5.3.7 Transmitter attack time. 16
5.3.8 Transmitter release time. 16
5.3.9 Transient frequency behaviour of the transmitter . 17
5.4 Other radio test suites . 17
5.4.1 Sensitivity (data or messages). 17
5.4.2 Co-channel rejection. 17
5.4.3 Adjacent channel selectivity. 17
5.4.4 Spurious response rejection . 17
5.4.5 Intermodulation response rejection . 17
5.4.6 Blocking or desensitization . 17
5.4.7 Spurious radiations. 17
5.4.8 Desensitization and sensitivity (duplex). 17
5.4.9 Spurious response rejection (duplex) . 17
ETSI
5 ETSI EN 300 113-2 V1.1.1 (2001-03)
Annex A (informative): Bibliography.18
History .19
ETSI
6 ETSI EN 300 113-2 V1.1.1 (2001-03)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical
Committee Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document is part 2 of a multi-part deliverable covering the Land mobile service; Radio equipment intended
for the transmission of data (and speech) and having an antenna connector, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering essential requirements under article 3.
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and speech) and having an antenna connector; Part 2: Harmonised EN covering essential requirements under article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.070.01Mobilni servisi na splošnoMobile services in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 300 113-2 Version 1.1.1SIST EN 300 113-2:2002en01-november-2002SIST EN 300 113-2:2002SLOVENSKI
STANDARD
ETSIEN300113-2V1.1.1(2001-03)CandidateHarmonizedEuropeanStandard(Telecommunicationsseries)ElectromagneticcompatibilityandRadiospectrumMatters(ERM);Landmobileservice;Radioequipmentintendedforthetransmissionofdata(andspeech)andhavinganantennaconnector;Part2:HarmonizedENcoveringessentialrequirementsunderarticle3.2oftheR&TTEDirectiveSIST EN 300 113-2:2002

ETSIETSIEN300113-2V1.1.1(2001-03)2ReferenceREN/ERM-RP02-040-2Keywordsantenna,data,radio,regulation,speech,mobile,PMRETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:[phone]Fax:[phone]SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:[e-mail]opartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2001.Allrightsreserved.SIST EN 300 113-2:2002

ETSIETSIEN300113-2V1.1.1(2001-03)3ContentsIntellectualPropertyRights.6Foreword.6Introduction.71Scope.92References.93Definitions,symbolsandabbreviations.103.1Definitions.103.2Symbols.103.3Abbreviations.104Technicalspecifications.104.1Environmentalprofile.104.2Transmitterrequirements.104.2.1Frequencyerror.104.2.1.1Definition.104.2.1.2Limit.104.2.1.3Methodofmeasurement.104.2.2Carrierpower(conducted).104.2.2.1Definition.104.2.2.2Limit.104.2.2.3Methodofmeasurement.114.2.3Effectiveradiatedpower.114.2.3.1Definition.114.2.3.2Limit.114.2.3.3Methodofmeasurement.114.2.4Adjacentchannelpower.114.2.4.1Definition.114.2.4.2Limit.114.2.4.3Methodofmeasurement.114.2.5Spuriousemissions.114.2.5.1Definition.114.2.5.2Limit.114.2.5.3Methodofmeasurement.114.2.6Intermodulationattenuation.114.2.6.1Definition.114.2.6.2Limit.114.2.6.3Methodofmeasurement.124.2.7Transmitterattacktime.124.2.7.1Definition.124.2.7.2Limit.124.2.7.3Methodofmeasurement.124.2.8Transmitterreleasetime.124.2.8.1Definition.124.2.8.2Limit.124.2.8.3Methodofmeasurement.124.2.9Transientfrequencybehaviourofthetransmitter.124.2.9.1Definition.124.2.9.2Limit.124.2.9.3Methodofmeasurement.124.3Receiverrequirements.124.3.1Sensitivity(dataormessages).124.3.1.1Definition.124.3.1.2Limit.134.3.1.3Methodofmeasurement.13SIST EN 300 113-2:2002

ETSIETSIEN300113-2V1.1.1(2001-03)44.3.2Co-channelrejection.134.3.2.1Definition.134.3.2.2Limit.134.3.2.3Methodofmeasurement.134.3.3Adjacentchannelselectivity.134.3.3.1Definition.134.3.3.2Limit.134.3.3.3Methodofmeasurement.134.3.4Spuriousresponserejection.134.3.4.1Definition.134.3.4.2Limit.134.3.4.3Methodofmeasurement.134.3.5Intermodulationresponserejection.134.3.5.1Definition.134.3.5.2Limit.144.3.5.3Methodofmeasurement.144.3.6Blockingordesensitization.144.3.6.1Definition.144.3.6.2Limit.144.3.6.3Methodofmeasurement.144.3.7Spuriousradiations.144.3.7.1Definition.144.3.7.2Limit.144.3.7.3Methodofmeasurement.144.3.8Desensitizationandsensitivity(duplex).144.3.8.1Definition.144.3.8.2Limit.144.3.8.3Methodofmeasurement.144.3.9Spuriousresponserejection(duplex).144.3.9.1Definition.144.3.9.2Limit.154.3.9.3Methodsofmeasurement.155Testingforcompliancewithtechnicalrequirements.155.1Environmentalconditionsfortesting.155.1.1Normalandextremetest-conditions.155.1.2Testpowersource.155.1.3Choiceofsamplesfortestsuites.155.2Interpretationofthemeasurementresults.155.3Essentialradiotestsuites.165.3.1Frequencyerror.165.3.2Carrierpower(conducted).165.3.3Effectiveradiatedpower.165.3.4Adjacentchannelpower.165.3.5Spuriousemissions.165.3.6Intermodulationattenuation.165.3.7Transmitterattacktime.165.3.8Transmitterreleasetime.165.3.9Transientfrequencybehaviourofthetransmitter.175.4Otherradiotestsuites.175.4.1Sensitivity(dataormessages).175.4.2Co-channelrejection.175.4.3Adjacentchannelselectivity.175.4.4Spuriousresponserejection.175.4.5Intermodulationresponserejection.175.4.6Blockingordesensitization.175.4.7Spuriousradiations.175.4.8Desensitizationandsensitivity(duplex).175.4.9Spuriousresponserejection(duplex).17SIST EN 300 113-2:2002

ETSIETSIEN300113-2V1.1.1(2001-03)5AnnexA(informative):Bibliography.18History.19SIST EN 300 113-2:2002

ETSIETSIEN300113-2V1.1.1(2
...