SIST EN 300 296-2:2001
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
General Information
- Abstract
To incorporate the text and tables corresponding to the sought change of status of the standard
- Status
- Published
- Publication Date
- 31-Aug-2001
- Technical Committee
- RES - Radio equipment and systems
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Sep-2001
- Due Date
- 01-Sep-2001
- Completion Date
- 01-Sep-2001
- Mandate
- M/284
Overview
SIST EN 300 296-2:2001 specifies essential requirements for electromagnetic compatibility (EMC) and radio spectrum use for land mobile radio equipment using integral antennas intended primarily for analogue speech. Developed by the Slovenski inštitut za standardizacijo (SIST) and harmonized with European Norm (EN) 300 296-2, this standard ensures that relevant radio equipment meets the essential requirements under Article 3.2 of the R&TTE Directive (1999/5/EC). This standard is crucial for the compliance, safety, and effective spectrum use of hand-held and portable radio devices operating between 30 MHz and 1000 MHz, typically used in professional mobile radio (PMR) and land mobile services.
Key Topics
- Scope and Purpose
The standard applies to hand-portable and mobile land radio devices with integral antennas, using angle modulation for analogue speech communication. It regulates devices with channel separations of 12.5 kHz, 20 kHz, and 25 kHz. - Technical & Test Requirements
Equipment must comply with technical requirements including transmitter frequency error, effective radiated power, maximum frequency deviation, adjacent channel power, spurious emissions, and transient frequency behavior. Receiver specifications include sensitivity, selectivity, rejection, and spurious response limits. - Testing & Measurement
The document details environmental profiles, sample selection, test suites, and interpretation of test results. All technical performance parameters are measured and reported according to the associated methods in EN 300 296-1. - Regulatory Alignment
SIST EN 300 296-2:2001 is a harmonized European standard, supporting compliance with the Radio Equipment and Telecommunications Terminal Equipment (R&TTE) Directive, ensuring effective use of spectrum and minimizing harmful interference.
Applications
This standard is widely applicable within the land mobile service for the following use cases:
- Professional Mobile Radio (PMR): Used by public safety, emergency services, transportation, utilities, and industry professionals.
- Portable Land Radios: Applies to hand-held radios with built-in antennas used in environments where reliable analogue speech communication is critical.
- Regulatory Compliance: Essential for manufacturers and suppliers to achieve CE marking for radio equipment in Europe, demonstrating conformity with the R&TTE Directive’s essential requirements on spectrum use and EMC.
Practical benefits of adopting SIST EN 300 296-2:2001 include:
- Streamlined market access throughout the European Economic Area (EEA) by meeting harmonized essential requirements.
- Improved interoperability and minimized radio-frequency interference.
- Enhanced safety and performance reliability for mission-critical land mobile communications.
Related Standards
- EN 300 296-1: Technical characteristics and methods of measurement for radio equipment using integral antennas (companion standard detailing specific measurement methods).
- ETS 300 086: Technical characteristics and test conditions for radio equipment with RF connectors, primarily for analogue speech.
- Directive 1999/5/EC (R&TTE Directive): European Union directive governing radio and telecommunications terminal equipment.
- EMC Directive 89/336/EEC: Directive covering electromagnetic compatibility requirements for electronic equipment.
- LV Directive 73/23/EEC: Relates to electrical equipment designed for specific voltage limits.
Summary
SIST EN 300 296-2:2001 offers a comprehensive, harmonized framework for ensuring electromagnetic compatibility and effective spectrum management in analogue mobile radio equipment with integral antennas. Its alignment with key European directives makes it a cornerstone for manufacturers, suppliers, and regulators seeking high reliability, legal compliance, and successful deployment of land mobile communication systems. For full technical requirements and testing procedures, refer to this standard in conjunction with EN 300 296-1.
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 300 296-2:2001 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive". This standard covers: To incorporate the text and tables corresponding to the sought change of status of the standard
To incorporate the text and tables corresponding to the sought change of status of the standard
SIST EN 300 296-2:2001 is classified under the following ICS (International Classification for Standards) categories: 33.060.99 - Other equipment for radiocommunications; 33.070.01 - Mobile services in general; 33.100.01 - Electromagnetic compatibility in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 300 296-2:2001 is associated with the following European legislation: EU Directives/Regulations: 1999/5/EC, 2005-01-1864, 2010-01-3290; Standardization Mandates: M/284. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 300 296-2:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.070.01Mobilni servisi na splošnoMobile services in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 300 296-2 Version 1.1.1SIST EN 300 296-2:2001en01-september-2001SIST EN 300 296-2:2001SLOVENSKI
STANDARD
ETSIEN300296-2V1.1.1(2001-03)CandidateHarmonizedEuropeanStandard(Telecommunicationsseries)ElectromagneticcompatibilityandRadiospectrumMatters(ERM);LandMobileService;Radioequipmentusingintegralantennasintendedprimarilyforanaloguespeech;Part2:HarmonizedENcoveringessentialrequirementsunderarticle3.2oftheR&TTEDirectiveSIST EN 300 296-2:2001
ETSIETSIEN300296-2V1.1.1(2001-03)2ReferenceREN/ERM-RP02-042-2Keywordsanalogue,mobile,PMR,radio,regulation,speechETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2001.Allrightsreserved.SIST EN 300 296-2:2001
ETSIETSIEN300296-2V1.1.1(2001-03)3ContentsIntellectualPropertyRights.5Foreword.5Introduction.61Scope.82References.83Definitions,symbolsandabbreviations.93.1Definitions.93.2Symbols.93.3Abbreviations.94Technicalspecifications.94.1Environmentalprofile.94.2Transmitterrequirements.94.2.1Frequencyerror.94.2.1.1Definition.94.2.1.2Limit.94.2.1.3Methodsofmeasurement.94.2.2Effectiveradiatedpower.94.2.2.1Definition.94.2.2.2Limit.94.2.2.3Methodsofmeasurement.104.2.3Maximumfrequencydeviation.104.2.3.1Definition.104.2.3.2Limit.104.2.3.3Methodsofmeasurement.104.2.4Adjacentchannelpower.104.2.4.1Definition.104.2.4.2Limit.104.2.4.3Methodsofmeasurement.104.2.5Spuriousemissions.104.2.5.1Definition.104.2.5.2Limit.104.2.5.3Methodsofmeasurement.104.2.6Transientfrequencybehaviourofthetransmitter.104.2.6.1Definition.104.2.6.2Limit.104.2.6.3Methodsofmeasurement.114.3Receiverrequirements.114.3.1Averageusablesensitivity(speech,fieldstrength).114.3.1.1Definition.114.3.1.2Limit.114.3.1.3Methodofmeasurement.114.3.2Co-channelrejection.114.3.2.1Definition.114.3.2.2Limit.114.3.2.3Methodofmeasurement.114.3.3Adjacentchannelselectivity.114.3.3.1Definition.114.3.3.2Limit.114.3.3.3Methodofmeasurement.114.3.4Spuriousresponserejection.114.3.4.1Definition.114.3.4.2Limit.124.3.4.3Methodofmeasurement.12SIST EN 300 296-2:2001
ETSIETSIEN300296-2V1.1.1(2001-03)44.3.5Intermodulationresponserejection.124.3.5.1Definition.124.3.5.2Limit.124.3.5.3Methodofmeasurement.124.3.6Blockingordesensitization.124.3.6.1Definition.124.3.6.2Limit.124.3.6.3Methodofmeasurement.124.3.7Spuriousradiations.124.3.7.1Definition.124.3.7.2Limit.124.3.7.3Methodofmeasurement.125Testingforcompliancewithtechnicalrequirements.135.1Essentialradiotestsuites.135.1.1Environmentalconditionsfortesting.135.1.1.1Normalandextremetest-conditions.135.1.1.2Testpowersource.135.1.2Choiceofsamplesfortestsuites.135.2Interpretationofthemeasurementresults.135.3Essentialradiotestsuites.145.3.1Frequencyerror.145.3.2Effectiveradiatedpower.145.3.3Maximumfrequencydeviation.145.3.4Adjacentchannelpower.145.3.5Spuriousemissions.145.3.6Transientfrequencybehaviourofthetransmitter.145.4Othertestspecifications.145.4.1Averageusablesensitivity(speech,fieldstrength).145.4.2Co-channelrejection.155.4.3Adjacentchannelselectivity.155.4.4Spuriousresponserejection.155.4.5Intermodulationresponserejection.155.4.6Blockingordesensitization.155.4.7Spuriousradiations.15AnnexA(informative):Bibliography.16History.17SIST EN 300 296-2:2001
ETSIETSIEN300296-2V1.1.1(2001-03)5IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisCandidateHarm
...