SIST EN 13631-7:2004
(Main)Explosives for civil uses - High explosives - Part 7: Determination of safety and reliability at extreme temperatures
Explosives for civil uses - High explosives - Part 7: Determination of safety and reliability at extreme temperatures
This European Standard specifies the special conditions and procedures permitting the extension to wider ranges of applicability of the following test methods:
- determination of resistance to hydrostatic pressure;
- verification of the means of initiation;
- determination of transmission of detonation.
Standardised test methods at extreme temperatures for the following purposes are not given:
- determination of sensitiveness to friction;
- determination of sensitiveness to impact;
- determination of resistance to water;
- determination of the initiating capability of boosters;
- determination of velocity of detonation.
NOTE In these cases, the manufacturer of the explosive should provide a suitable test method and, in cases where the results should be checked by an independent institution or authority, the manufacturer and the institution or authority should agree upon a suitable test method.
Explosivstoffe für zivile Zwecke - Sprengstoffe - Teil 7: Bestimmung der Sicherheit und Zuverlässigkeit bei extremen Temperaturen
Diese Europäische Norm beschreibt die speziellen Bedingungen und Verfahren, um die Anwendbarkeit der folgenden Prüfmethoden auszuweiten:
3 Bestimmung der Widerstandsfähigkeit gegen hydrostatischen Druck;
3 Überprüfung des Zündverfahrens;
3 Bestimmung der Detonationsweiterleitung.
Genormte Prüfmethoden bei extremen Temperaturen für die folgenden Zwecke sind nicht enthalten:
3 Bestimmung der Reibempfindlichkeit;
3 Bestimmung der Schlagempfindlichkeit;
3 Bestimmung der Wasserfestigkeit;
3 Bestimmung der Zündstärke von Verstärkungsladungen;
3 Bestimmung der Detonationsgeschwindigkeit.
In diesen Fällen sollte der Hersteller des Sprengstoffes eine geeignete Prüfmethode angeben und in Fällen, in denen die Ergebnisse durch eine unabhängige Institution oder Behörde überprüft werden sollen, sollten Hersteller und Institution oder Behörde sich auf eine geeignete Prüfmethode einigen.
Explosifs a usage civil - Explosifs - Partie 7: Détermination de la sécurité et de la fiabilité aux températures extremes
La présente Norme européenne spécifie les conditions particulieres et les modes opératoires permettant l'extension du domaine d'applicabilité des méthodes d'essai suivantes :
- détermination de la résistance a la pression hydrostatique ;
- vérification du moyen d'amorçage ;
- détermination de la transmission de la détonation.
Aucune méthode d'essai normalisée n'est fournie concernant les applications suivantes aux températures extremes :
- détermination de l'indice de sensibilité au frottement ;
- détermination de la sensibilité a l'impact ;
- détermination de la résistance a l'eau ;
- détermination de la capacité d'amorçage des relais de détonation ;
- détermination de la vitesse de détonation.
NOTE Dans ce cas, il est recommandé au fabricant de l'explosif de prévoir une méthode d'essai satisfaisante et, s'il y a lieu de faire vérifier les résultats par une institution ou une autorité indépendante, il convient que le fabricant et l'institution ou l'autorité se mettent d'accord sur une méthode d'essai appropriée.
Eksplozivi za civilno uporabo – Razstreliva – 7. del: Ugotavljanje varnosti in zanesljivosti pri ekstremnih temperaturah
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosives for civil uses - High explosives - Part 7: Determination of safety and reliability at extreme temperaturesEksplozivi za civilno uporabo – Razstreliva – 7. del: Ugotavljanje varnosti in zanesljivosti pri ekstremnih temperaturahExplosifs a usage civil - Explosifs - Partie 7: Détermination de la sécurité et de la fiabilité aux températures extremesExplosivstoffe für zivile Zwecke - Sprengstoffe - Teil 7: Bestimmung der Sicherheit und Zuverlässigkeit bei extremen TemperaturenTa slovenski standard je istoveten z:EN 13631-7:2003SIST EN 13631-7:2004en71.100.30ICS:SLOVENSKI
STANDARDSIST EN 13631-7:200401-januar-2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13631-7November 2003ICS 71.100.30English versionExplosives for civil uses - High explosives - Part 7:Determination of safety and reliability at extreme temperaturesExplosifs à usage civil - Explosifs - Partie 7: Déterminationde la sécurité et de la fiabilité aux températures extrêmesExplosivstoffe für zivile Zwecke - Sprengstoffe - Teil 7:Bestimmung der Sicherheit und Zuverlässigkeit beiextremen TemperaturenThis European Standard was approved by CEN on 1 September 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13631-7:2003 E
EN 13631-7:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.54Test methods.55Test report.7Annex ZA (informative)
Clauses of this European Standard addressing essential requirements orother provisions of EU Directives.8
EN 13631-7:2003 (E)3ForewordThis document (EN 13631-7:2003) has been prepared by Technical Committee CEN/TC 321 "Explosives for civiluses", the Secretariat of which is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by May 2004, and conflicting national standards shall be withdrawn at the latest byMay 2004.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document.This European Standard is one of a series of standards on Explosives for civil uses – High explosives. The otherparts of this series are:prEN 13631-1Part 1: Requirements.EN 13631-2Part 2: Determination of thermal stability of explosives.prEN 13631-3Part 3: Determination of sensitiveness to friction of explosives.EN 13631-4Part 4: Determination of sensitiveness to impact of explosives.EN 13631-5Part 5: Determination of resistance to water.EN 13631-6Part 6: Determination of resistance to hydrostatic pressure.EN 13631-10Part 10: Verification of the means of initiation.EN 13631-11Part 11: Determination of transmission of detonation.prEN 13631-12Part 12: Specification of booster with different initiating capability.EN 13631-13Part 13: Determination of density.EN 13631-14Part 14: Determination of velocity of detonation.prEN 13631-15Part 15: Calculation of thermodynamic properties.prEN 13631-16Part 16: Detection and measurement of toxic gases.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.
EN 13631-7:2003 (E)41 ScopeThis European Standard specifies the special conditions and procedures permitting the extension to wider rangesof applicability of the following test methods: determination of resistance to hydrostatic pressure; verification of the means of initiation; determination of transmission of detonation;Standardised test methods at extreme temperatures for the following purposes are not given: determination of sensitiveness to friction; determination of sensitiveness to impact; determination of resistance to water; determination of the initiating capability of boosters; determination of velocity of detonation.NOTEIn these cases, the manufacturer of the explosive should provide a suitable test method and, in cases where theresults should be checked by an independent institution or authority, the manufacturer and the institution or authority shouldagree upon a suitable test method.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 13631-6, Explosives for civil uses – High explosives – Part 6: Determination of resistance to hydrostaticpressure.EN 13631-10, Explosives for civil uses – High explosives – Part 10: Verification of th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.