SIST EN 62002-1:2008

Mobile and portable DVB-T/H radio access -- Part 1: Interface specification

2MV on IEC published without FDIS stage

Mobiler und tragbarer Funkzugang zu DVB-T/H -- Teil 1: Festlegung der Schnittstelle

Accès radio DVB-T/H vers les mobiles et les portables -- Partie 1 : Spécification de l'interface

Mobilni in prenosni radijski dostop v sistemu DVB-T/H - 1. del: Specifikacija vmesnika (IEC 62002-1:2005)

General Information

• Status: Withdrawn
• Publication Date: 28-Nov-2007
• Withdrawal Date: 24-Sep-2008
• ICS: 33.170 - Television and radio broadcasting
• Technical Committee: AVM - Audio, video and multimedia systems and equipment
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 23-Sep-2008
• Due Date: 16-Oct-2008
• Completion Date: 25-Sep-2008
• Ref Project: EN 62002-1:2006 - Mobile and portable DVB-T/H radio access - Part 1: Interface specification

Relations

• Replaced By: SIST EN 62002-1:2008 - Mobile and portable DVB-T/H radio access - Part 1: Interface specification
• Effective Date: 07-Jun-2022
• Replaced By: SIST EN 62002-1:2008 - Mobile and portable DVB-T/H radio access - Part 1: Interface specification
• Effective Date: 01-Nov-2008
• Replaced By: SIST EN 62002-1:2008 - Mobile and portable DVB-T/H radio access - Part 1: Interface specification
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62002-1:2008
01-februar-2008
Mobilni in prenosni radijski dostop v sistemu DVB-T/H - 1. del: Specifikacija
vmesnika (IEC 62002-1:2005)
Mobile and portable DVB-T/H radio access - Part 1: Interface specification (IEC 62002-
1:2005)
Mobiler und tragbarer Funkzugang zu DVB-T/H - Teil 1: Festlegung der Schnittstelle
(IEC 62002-1:2005)
Acces radio DVB-T/H vers les mobiles et les portables - Partie 1 : Spécification de
l'interface (IEC 62002-1:2005)
Ta slovenski standard je istoveten z: EN 62002-1:2006
ICS:
33.170
SIST EN 62002-1:2008 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 62002-1

NORME EUROPÉENNE
November 2006
EUROPÄISCHE NORM

ICS 33.170


English version


Mobile and portable DVB-T/H radio access
Part 1: Interface specification
(IEC 62002-1:2005)


Accès radio DVB-T/H  Mobiler und tragbarer Funkzugang
vers les mobiles et les portables zu DVB-T/H
Partie 1 : Spécification de l'interface Teil 1: Festlegung der Schnittstelle
(CEI 62002-1:2005) (IEC 62002-1:2005)




This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in two official versions (English and German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62002-1:2006 E

---------------------- Page: 2 ----------------------

EN 62002-1:2006 - 2 -
Foreword
The text of the International Standard IEC 62002-1:2005, prepared by IEC TC 100, Audio, video and
multimedia systems and equipment, was submitted to the formal vote and was approved by CENELEC as
EN 62002-1 on 2006-11-01 without any modification.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-11-01
__________
Endorsement notice
The text of the International Standard IEC 62002-1:2005 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 62002-1:2006
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
CISPR 13 EN 55013
- Sound and television broadcast receivers 2001
and associated equipment - Radio
disturbance characteristics - Limits and
methods of measurement


1) 2)
CISPR 20 EN 55020
- Sound and television broadcast receivers 2002
+ corr. September
2005
and associated equipment - Immunity
characteristics - Limits and methods of
measurement


1) 2)
IEC 60169-2 HD 134.2 S2
- Radio-frequency connectors 1984
Part 2: Coaxial unmatched connector


- - Digital Video Broadcasting (DVB); Framing ETSI EN 300 744 2004
structure, channel coding and modulation
for digital terrestrial television V1.5.1


1)
ETSI ETS 300 342-1
- - Radio Equipment and Systems (RES); -
ElectroMagnetic Compatibility (EMC) for
European digital cellular telecommunications
system (GSM 900 MHz and DCS 1 800 MHz)
Part 1: Mobile and portable radio and
ancillary equipment


1)
ETSI EN 300 607-1
- - Digital cellular telecommunications system -
(Phase 2+) (GSM) - Mobile Station (MS)
conformance specification
Part 1: Conformance specification


ETSI EN 302 304 2004
- - Digital Video Broadcasting (DVB);
Transmission System for Handheld
Terminals (DVB-H) V1.1.1




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 4 ----------------------

INTERNATIONAL IEC


STANDARD 62002-1





First edition
2005-10


Mobile and portable DVB-T/H radio access –
Part 1:
Interface specification

 IEC 2005  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale XA
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

---------------------- Page: 5 ----------------------

– 2 – 62002-1  IEC:2005(E)
CONTENTS
FOREWORD.5

1 Scope.7
2 Normative references .7
3 Abbreviations .8
4 Terminal categories .10
5 Definition of receiving conditions .11
5.1 Portable reception .11
5.2 Mobile reception.11
6 Frequencies and channel bandwidths .11
6.1 Channel frequencies .11
6.2 Supported frequency ranges.12
6.3 Supported bandwidths .13
7 DVB-T modes .13
7.1 Supported DVB-T modes.13
7.2 Change of modulation parameters .13
7.3 Tuning procedure .13
8 Transmitter performance .14
8.1 Transmitter noise-like impairments .14
8.2 Further transmitter impairments.15
8.3 Spectrum masks.16
9 Receiver antenna characteristics.17
9.1 Antennas for terminal category a .17
9.2 Antennas for terminal category b1 .17
9.3 Antennas for terminal category b2 and c .18
9.4 External antennas .19
10 Receiver performance .19
10.1 Reference model .19
10.2 Noise model .20
10.3 Degradation criteria.21
10.4 Diversity receivers.22
10.5 DVB-H receivers.23
10.6 Channel models .24
10.7 C/N performance .25
10.8 Receiver minimum and maximum signal input levels .28
10.9 Immunity to analogue and/or digital signals in other channels .29
10.10 Immunity to co-channel interference from analogue TV signals .35
10.11 Guard interval utilization.36
10.12 Tolerance to impulse interference.38
10.13 EMC characteristics .40
11 Interoperability with other radio systems.40
11.1 Cellular radios .40
11.2 DVB-RCT .44

---------------------- Page: 6 ----------------------

62002-1  IEC:2005(E) – 3 –
Annex A (informative) Active external antennas .45
Annex B (informative) An example of C/N performance with a practical transmitter .48
Annex C (informative) Multi-path reception in a DVB-T system .49
Annex D (informative) C/N performance of DVB-H receivers .52

Bibliography.54

Figure 1 – Reference model.19
Figure 2 – Noise model.20
Figure 3 – Antenna diversity receiver.22
Figure 4 – Receiver behaviour in a mobile channel .25
Figure 5 – PAL interfering signals .30
Figure 6 – SECAM L interfering signal .30
Figure 7 – Pattern S1 in case of N + 1 or N – 1 .32
Figure 8 – Pattern S2 in case of N + 1 or N – 1 .33
Figure 9 – Pattern L1 .34
Figure 10 – Pattern L2 .34
Figure 11 – Pattern L3 .35
Figure 12 – Echo outside guard interval mask.37
Figure 13 – Mask for echo outside GI for GI = 1/4.38
Figure 14 – Definition of the impulse interference test pattern.39
Figure 15 – Terminal architectures.41
Figure 16 – Frequency bands .42
Figure 17 – GSM Tx block diagram .43
Figure 18 – Tx PA-noise mask in DVB-T/H receiver input.44
Figure C.1 – Theoretical limits of out-of-guard delay .49
Figure C.2 – DVB-T model – Splitting of the signal power into contributing and
interfering components .49
Figure C.3 – Theoretical echo power profile for 8k, 64QAM, 2/3.51
Figure D.1 – DVB-H reference receiver C/N behaviour in mobile channel .53

Table 1 – Supported frequency ranges .13
Table 2 – Conversion of MER to END .15
Table 3 – Typical antenna gain for terminal category b2 and c.18
Table 4 – Delta values between picture failure point and reference BER.21
Table 5 – Approximation of the DVB-T specified Rayleigh channel.24
Table 6 – Typical urban profile (TU6) constitution .24
Table 7 – C/N (dB) for reference BER in Gaussian channel .26
Table 8 – C/N (dB) for reference BER in portable channel .26
–4
Table 9 – C/N (dB) for PER = 10 in typical urban channel for single antenna receiver .27
–4
Table 10 – C/N (dB) for PER = 10 in typical urban channel for diversity receiver .27
Table 11 – Maximum input levels for terminal category a and b1.29
Table 12 – Maximum input levels for terminal category b2 and c.29

---------------------- Page: 7 ----------------------

– 4 – 62002-1  IEC:2005(E)
Table 13 – Immunity to pattern S1 .32
Table 14 – Immunity to pattern S2 .33
Table 15 – Immunity to pattern L1.34
Table 16 – Immunity to pattern L2.35
Table 17 – Immunity to pattern L3.35
Table 18 – Immunity to co-channel interference from analogue signals.36
Table 19 – C/N for echo within guard interval .36
Table 20 – Timing of the corner point Tc .37
Table 21 – Definition of the value Δ .37
Table 22 – Definition of the inflection point .38
Table 23 – Impulse interference test patterns .40
Table 24 – GSM reject filter attenuation .43
Table B.1 – C/N (dB) for reference BER.48
Table D.1 – C/N (dB) for 5 % MFER in Gaussian channel .52
Table D.2 – C/N (dB) for QEFIP in portable channel.53
Table D.3 – C/N (dB) in mobile channel.53

---------------------- Page: 8 ----------------------

62002-1  IEC:2005(E) – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MOBILE AND PORTABLE DVB-T/H RADIO ACCESS –

Part 1: Interface specification


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62002-1 has been prepared by Technical Area 1: Terminals for
audio, video and data services, of IEC technical committee 100: Audio, video and multimedia
systems and equipment.
The text of this standard is based on the following documents:
CDV Report on voting
100/920/CDV 100/1012/RVC

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 9 ----------------------

– 6 – 62002-1  IEC:2005(E)
IEC 62002 consists of the following parts, under the general title Mobile and portable DVB-
T/H Radio access:
Part 1: Interface specification
Part 2: Interface conformance testing
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

A bilingual version of this publication may be issued at a later date.

---------------------- Page: 10 ----------------------

62002-1  IEC:2005(E) – 7 –
MOBILE AND PORTABLE DVB-T/H RADIO ACCESS –

Part 1: Interface specification



1 Scope
This part of IEC 62002 is a radio access specification for mobile, portable and hand-held
portable devices capable of receiving DVB-T/H services. It includes informative system
aspects as well as specifications for minimum RF performance. It covers terminals in three
main classes, namely integrated car terminals, portable digital TV sets and hand-held portable
convergence terminals. Interoperability with integrated cellular radios is also considered. The
specification covers the following areas.
• Frequency ranges
• Supported modes
• Definition of receiving conditions
• Definition of the receiver RF reference model
• Definition of QoS criteria
• Antenna characteristics
• Channel models
• C/ -performance with different channels
• Minimum and maximum input levels
• Immunity to interfering signals
• Definition of an ensemble of interference patterns
• Tolerance to impulse interference
• SFN performance
• Transmitter minimum performance
• Interoperability of cellular radios
• EMC aspects
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
CISPR 13, Sound and television broadcast receivers and associated equipment – Radio
disturbance characteristics – Limits and methods of measurement
CISPR 20, Sound and television broadcast receivers and associated equipment – Immunity
characteristics – Limits and methods of measurement
IEC 60169-2, Radio-frequency connectors – Part 2: Coaxial unmatched connector
ETSI EN 300 744:2004, Digital Video Broadcasting (DVB); Framing structure, Channel coding
and modulation for digital terrestrial television, V1.5.1

---------------------- Page: 11 ----------------------

– 8 – 62002-1  IEC:2005(E)
ETSI ETS 300 342-1, Radio Equipment and Systems (RES); ElectroMagnetic Compatibility
(EMC) for European digital cellular telecommunications system (GSM 900 MHz and DCS
1 800 MHz) – Part 1: Mobile and portable radio and ancillary equipment
ETSI EN 300 607-1, Digital cellular telecommunications system (Phase 2+) (GSM) – Mobile
Station (MS) conformance specification; Part 1: Conformance specification
ETSI EN 302 304:2004, Digital Video Broadcasting (DVB); Transmission System for Handheld
Terminals (DVB-H), V1.1.1
3 Abbreviations
For the purposes of this document, the following abbreviations apply.
λ Lambda, wavelength (λ = c/f)
A2 German analogue TV stereo system
A Coupling between antennas
A
AGC Automatic gain control
A Stop band attenuation of the GSM reject filter
GSM
B
Bandwidth
BER Bit error ratio
C
Carrier power (In band carrier power including any echoes)
8
C
Speed of light c = 3,0 × 10 m/s
Ci Power contribution from the i-th signal
Ct Total useful carrier power
C/N
Carrier-to-noise ratio
C/N Minimum C/N
min
CPE
Common phase error
CR Code rate
dB Decibel
dBc dB compared to carrier power C
dBd Antenna gain in dB compared to reference dipole (0 dBd = –2,14 dBi)
dBi Antenna gain in dB compared to isotropic antenna (0 dBi = 2,14 dBd)
dB(mW) Power in dB compared to 1 mW
DVB, DVB-T Digital video broadcasting, terrestrial digital video broadcasting
DVB-H Digital video broadcasting to hand held terminals
DVB-RCT DVB terrestrial return channel
E Field strength V/m
E(dBµV/m) Field strength in dB compared to 1 µV
EDGE Enhanced data rates for GSM/global evolution
EMC Electromagnetic compatibility
END Equivalent noise degradation
ENF Equivalent noise floor
ESR Erroneous second ratio

---------------------- Page: 12 ----------------------

62002-1  IEC:2005(E) – 9 –
F Frequency in Hz
f (MHz) Frequency in MHz
fc Centre frequency
F Noise factor
fd, Fd Doppler frequency
Fd Doppler frequency with minimum C/N requirement raised by 3dB
3dB
FER Frame error rate
G Gain
Ga Antenna gain
GI Guard interval
GPRS General packet radio service
GSM Global system for mobile communications
I Interfering power
ICI Intercarrier interference
J joule
–26
K
Boltzmann’s constant k = 1,38 × 10 J/K
K kelvin
L1, L2, L3 Linearity patterns
L
Insertion loss of the GSM reject filter
GSM
LNA Low noise amplifier
MER
Modulation error ratio
MFER MPE-FEC frame error rate
MHz Megahertz
MPEG-2 Motion pictures expert group, video compression standard
N, m, N
Channel indexes
NF Noise figure in dB
NICAM Additional sound carrier for analogue TV, modulated with a near
instantaneous compended audio multiplex
PA Power amplifier
PAL, PAL B, PAL G, Phase alternation line, TV-systems using PAL
PAL I, PAL I1
PER Packet error ratio
P
Input power W
in
P (dB(mW)) Input power dB compared to 1 mW
in
P
Maximum power

max
P Minimum power
min
ppm Parts per million
PSI/SI Program specific information, service information
P
Transmission power
TX
Px Excess noise power dBc
QAM16, QAM64 Quadrature amplitude modulation, 16-level and 64-level versions

---------------------- Page: 13 ----------------------

– 10 – 62002-1  IEC:2005(E)
QEF Quasi error free
QoS Quality of service
QPSK Quaternary phase shift keying
RF Radiofrequency
RS Reed solomon
Rx Receiver
S1,S2 Selectivity patterns
SECAM, SECAM L Sequential à mémoire, TV system using SECAM
SFN Single frequency network
SFP Subjective failure point
T Temperature in kelvins
Tc Corner point
Te Total duration of the gating pulses
ti Time of arrival for the i-th signal
TS Transport stream
Tg Guard interval duration
Tu Active symbol duration
Tx Transmitter
UHF Ultra high frequency
UMTS Universal mobile telecommunications system
VHF Very high frequency
W watt
WCDMA Wide-band code division multiple access
Wi Weighting coefficient for the i-th component

4 Terminal categories
In this specification three different terminal categories are considered. The requirements
cover all categories unless otherwise stated.
The terminal categories are:
a) Integrated car terminals
This category covers DVB-T terminals installed in a car and where the antenna is integral
with the car.
b) Portable digital TV sets
This category covers terminals, which are intended for receiving normal MPEG-2 based
digital TV services indoors and outdoors with terminal attached antennas. This category is
divided into two subcategories.
1) The receiver screen size is typically greater than 25 cm and the receiver may be
battery- or mains-powered. Typically, the terminal is stationary during the reception.
An example of the antenna construction may be an adjustable telescope or wide-
band design, either active or passive, attached to the receiver.

---------------------- Page: 14 ----------------------

62002-1  IEC:2005(E) – 11 –
2) Pocketable digital TV-receiver. The terminal is battery operated and can be moved
during use. Usu
...