SIST EN 60130-17:2002

Connectors for frequencies below 3 MHz -- Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries

Is a connector detail specification for a battery interconnection system for portable computers, cellular telephones and other electronic devices requiring power not to exceed 50 V d.c. SELV (safety extra low voltage).

Steckverbinder für Frequenzen unter 3 MHz -- Teil 17: Bauartspezifikation für Verbindungselemente für wiederaufladbare Batterien mit Steckmöglichkeiten in mehreren Richtungen

Connecteurs utilisés aux fréquences jusqu'à 3 MHz -- Partie 17: Spécification particulière des dispositifs d'interconnexion qui permettent un acouplement multidirectionnel, à utiliser avec des batteries rechargeables

Est une spécification particulière de connecteurs pour un système d'interconnexion d'accumulateurs d'ordinateurs portables, de téléphones cellulaires et autres dispositifs électroniques nécessitant une puissance inférieure à 50 V c.c. SELV (basse tension de sécurité).

Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries (IEC 60130-17:1998)

General Information

• Status: Published
• Publication Date: 31-Aug-2002
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2002
• Due Date: 01-Sep-2002
• Completion Date: 01-Sep-2002
• Ref Project: EN 60130-17:1999 - Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60130-17:2002
01-september-2002
Connectors for frequencies below 3 MHz - Part 17: Detail specification for
interconnection devices which permit multi-directional mating, for use with
rechargeable batteries (IEC 60130-17:1998)
Connectors for frequencies below 3 MHz -- Part 17: Detail specification for
interconnection devices which permit multi-directional mating, for use with rechargeable
batteries
Steckverbinder für Frequenzen unter 3 MHz -- Teil 17: Bauartspezifikation für
Verbindungselemente für wiederaufladbare Batterien mit Steckmöglichkeiten in
mehreren Richtungen
Connecteurs utilisés aux fréquences jusqu'à 3 MHz -- Partie 17: Spécification particulière
des dispositifs d'interconnexion qui permettent un acouplement multidirectionnel, à
utiliser avec des batteries rechargeables
Ta slovenski standard je istoveten z: EN 60130-17:1999
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 60130-17:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60130-17:2002

---------------------- Page: 2 ----------------------

SIST EN 60130-17:2002

---------------------- Page: 3 ----------------------

SIST EN 60130-17:2002

---------------------- Page: 4 ----------------------

SIST EN 60130-17:2002

---------------------- Page: 5 ----------------------

SIST EN 60130-17:2002

---------------------- Page: 6 ----------------------

SIST EN 60130-17:2002
NORME
CEI
INTERNATIONALE
IEC
60130-17
INTERNATIONAL
Première édition
STANDARD
First edition
1998-02
Connecteurs utilisés aux fréquences
jusqu'à 3 MHz –
Partie 17:
Spécification particulière des dispositifs
d'interconnexion qui permettent
un accouplement multidirectionnel,
à utiliser avec des batteries rechargeables
Connectors for frequencies below 3 MHz –
Part 17:
Detail specification for interconnection
devices which permit multi-directional mating,
for use with rechargeable batteries
 IEC 1998 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE V
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 60130-17:2002
60130-17 © IEC:1998 – 3 –
CONTENTS
Page
FOREWORD . 7
Clause
1 General . 9
1.1 Scope . 9
1.2 Normative references . 9
1.3 Ratings and characteristics . 11
1.4 Marking . 11
1.4.1 On each connector . 11
1.4.2 On the package . 11
2 IEC type designation . 13
3 Dimensional information for 7,2 V battery interconnection system – Type A . 15
3.1 General . 15
3.2 Isometric view and common features . 15
3.3 Mating information . 15
3.3.1 Keyed fixed connector styles . 17
3.3.2 Mating direction – Right-angle fixed connector, styles A and B . 19
3.3.3 Mating configurations – Right-angle fixed connector, styles A and B . 19
3.3.4 Mating direction – Vertical fixed connector assembly, style C . 21
3.3.5 Mating configurations – Vertical fixed connector assembly, style C . 23
3.4 Fixed connectors . 25
3.4.1 Dimensions . 25
3.4.2 Terminations . 31
3.5 Free connectors . 33
3.5.1 Dimensions . 33
3.5.2 Electrical contact area . 35
3.6 Mounting information for fixed connector with male contacts . 35
3.6.1 Printed board . 35
3.7 Mounting information for free connector with female contacts . 39
3.8 Gauges . 39
3.8.1 Sizing and retention force gauge . 39
4 Dimensional information for 10,8 V battery interconnection system – Type B . 41
4.1 General . 41
4.2 Isometric view and common features . 41

---------------------- Page: 8 ----------------------

SIST EN 60130-17:2002
60130-17 © IEC:1998 – 5 –
Clause Page
4.3 Mating information . 41
4.3.1 Keyed fixed connector styles . 41
4.3.2 Mating direction . 43
4.3.3 Mating configuration . 43
4.4 Fixed connectors . 43
4.4.1 Dimensions . 43
4.4.2 Terminations . 49
4.5 Free connectors . 49
4.5.1 Dimensions . 49
4.5.2 Electrical contact area . 51
4.6 Mounting information for fixed connector with male contacts . 51
4.6.1 Printed board . 51
4.7 Mounting information for free connector with female contacts . 51
4.8 Gauges . 51
4.8.1 Sizing and retention force gauge . 51
5 Dimensional information for 4,8 V battery interconnection system – Type C . 53
6 Dimensional information for 12,0 V battery interconnection system – Type D . 53
7 Characteristics . 53
7.1 Climatic category . 53
7.2 Electrical . 53
7.2.1 Voltage proof . 53
7.2.2 Current-carrying capacity . 53
7.2.3 Initial contact resistance . 55
7.3 Mechanical . 55
7.3.1 Mechanical operation . 55
7.3.2 Insertion and withdrawal forces . 55
8 Test schedule . 57
8.1 General . 57
8.2 Arrangement for dynamic stress tests . 59
9 Test schedule tables . 61
9.1 Preliminary test group P . 61
9.2 Group AP . 63
9.3 Group BP . 65
9.4 Group CP . 67

---------------------- Page: 9 ----------------------

SIST EN 60130-17:2002
60130-17 © IEC:1998 – 7 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
CONNECTORS FOR FREQUENCIES BELOW 3 MHz –
Part 17: Detail specification for interconnection devices which
permit multi-directional mating, for use with rechargeable batteries
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60130-17 has been prepared by subcommittee 48B: Connectors, of
IEC technical committee 48: Electromechanical components and mechanical structures for
electronic equipment.
The text of this standard is based on the following document:
FDIS Report on voting
48B/652/FDIS 48B/658/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

---------------------- Page: 10 ----------------------

SIST EN 60130-17:2002
60130-17 © IEC:1998 – 9 –
CONNECTORS FOR FREQUENCIES BELOW 3 MHz –
Part 17: Detail specification for interconnection devices which
permit multi-directional mating, for use with rechargeable batteries
1 General
1.1 Scope
This part of IEC 60130 is a connector detail specification for a battery interconnection system
for portable computers, cellular telephones and other electronic devices requiring power not to
exceed 50 V d.c. SELV (Safety Extra Low Voltage).
1.2 Normative references
The following normative documents contain provisions which, through reference in this text,
constitute provisions of this part of IEC 60130. At the time of publication, the editions indicated
were valid. All normative documents are subject to revision, and parties to agreements based
on this part of IEC 60130 are encouraged to investigate the possibility of applying the most
recent editions of the normative documents indicated below. Members of IEC and ISO maintain
registers of currently valid International Standards
IEC 60130-0:1970, Connectors for frequencies below 3 MHz – Part 0: Guide to drawing
information in detail specifications
IEC 60130-1:1988, Connectors for frequencies below 3 MHz – Part 1: General requirements
and measuring methods
IEC 60512-1:1994, Electromechanical components for electronic equipment; basic testing
procedures and measuring methods – Part 1: General
IEC 60512-2:1985, Electromechanical components for electronic equipment; basic testing
procedures and measuring methods – Part 2: General examination, electrical continuity and
contact resistance tests, insulation resistance tests and voltage stress tests
IEC 60512-3:1976, Electromechanical components for electronic equipment; basic testing
procedures and measuring methods – Part 3: Current-carrying capacity tests
IEC 60512-4:1976, Electromechanical components for electronic equipment; basic testing
procedures and measuring methods – Part 4: Dynamic stress tests
IEC 60512-5:1992, Electromechanical components for electronic equipment; basic testing
procedures and measuring methods – Part 5: Impact tests (free components), static load tests
(fixed components), endurance tests and overload tests
IEC 60512-6:1984, Electromechanical components for electronic equipment; basic testing
procedures and measuring methods – Part 6: Climatic tests and soldering tests

---------------------- Page: 11 ----------------------

SIST EN 60130-17:2002
60130-17 © IEC:1998 – 11 –
IEC 60512-7:1993, Electromechanical components for electronic equipment; basic testing
procedures and measuring methods – Part 7: Mechanical operating tests and sealing tests
IEC 60512-8:1993, Electromechanical components for electronic equipment; basic testing
procedures and measuring methods – Part 8: Connector tests (mechanical) and mechanical
tests on contacts and terminations
ISO 468:1982, Surface roughness – Parameters, their values and general rules for specifying
requirements
1.3 Ratings and characteristics
Rated voltage: Maximum 50 V d.c.
Current rating: 4 A, 30 °C temperature rise
Insulation resistance: 1 000 MΩ
Climatic category: 30/070/10
Printed board thickness: 1,6 mm
Contact spacing: 5 mm
1.4 Marking
1.4.1 On each connector
Each connector shall have the identification of the number one contact position marked as
indicated on the fixed connector in this detail specification.
Additional markings shall include the following information:
a) mark of origin (manufacturer's name or trade mark);
b) year and month (or week) of manufacture;
c) IEC type designation, according to clause 2.
However, since the number of characters this requires may exceed the limitation imposed by
computer processing systems, the manufacturer may use his own part number, providing that a
cross-reference list is made available.
If space does not permit full marking, as much as possible of the information, in the order
shown, shall be included.
1.4.2 On the package
The information specified in items a), b) and c) shall always be marked on the package.

---------------------- Page: 12 ----------------------

SIST EN 60130-17:2002
60130-17 © IEC:1998 – 13 –
2 IEC type designation
IEC 60130-17 L N N L L L N L N
–
Type of system Performance level
7,2 V A 1 PL1
10,8 V B 2 PL2 *
4,8 V * C 3 PL3 *
12,0 V * D
Style of connector Board thickness
Fixed A 1,6 mm
B 2,4 mm
Style A 1
C 3,2 m
...