SIST EN IEC 62271-213:2021

High-voltage switchgear and controlgear - Part 213: Voltage detecting and indicating system (IEC 62271-213:2021)

This part of IEC 62271 is applicable to the voltage detecting and indicating system (VDIS) to
be installed on indoor and outdoor high-voltage equipment.
The VDIS as defined by this document includes a coupling system per phase (capacitive,
resistive coupling or other technology) to connect to live parts (main circuit).
The VDIS is applicable on systems with nominal voltages above 1 kV and service frequencies
from 16,7 Hz up to and including 60 Hz. The VDIS is used to detect and indicate the presence
or absence of operating voltage. It is not intended to distinguish between voltage not present
(i.e. U < 10 % of nominal voltage) and dead circuit state (i.e. U = 0 V).
NOTE 1 The use of a specific means of connection to earth of the main circuit (e.g. by an earthing switch) provides
the "dead circuit" (U = 0 V) state.
NOTE 2 The VDIS has the same threshold values as the voltage presence indicating system (VPIS) (IEC 62271-
206) and the voltage detecting system (VDS) (IEC 61243-5) for not indicating presence of voltage and for detecting
an absence of operating voltage, respectively.
The VDIS is fixed on equipment such as switchgear and controlgear according to the IEC 62271
series or transformers according to their own standards.
The products designed and manufactured in accordance with this document contribute to the
safety of the users, provided they are used by skilled or instructed persons in accordance with
safe methods of work and the instructions for use.

Hochspannungs-Schaltgeräte und -Schaltanlagen – Teil 213: Spannungsprüf- und -anzeigesysteme (IEC 62271-213:2021)

Appareillage à haute tension - Partie 213: Système détecteur et indicateur de tension (IEC 62271-213:2021)

L’IEC 62271-213:2021 s’applique au système détecteur et indicateur de tension (VDIS) à installer sur des équipements haute tension pour installation à l’intérieur et à l’extérieur.
Le VDIS défini par le présent document comprend un système de couplage par phase (couplage capacitif, résistif ou d’une autre technologie) assurant la connexion avec les parties actives (circuit principal).
Cette première édition annule et remplace la première édition de l’IEC 61243-5 parue en 1997 et la première édition de l’IEC 62271-206 parue en 2011. Cette édition est issue de la fusion de l’IEC 61243-5 et de l’IEC 62271-206.
Cette édition inclut les modifications techniques majeures suivantes par rapport aux éditions précédentes de l’IEC 61243-5 et l’IEC 62271-206:
a) un signal de sortie facultatif est défini pour être utilisé dans les cas d’utilisation générale;
b) une seule interface est définie pour le système détecteur et indicateur de tension (VDIS);
c) le mesurage de la capacité de courant admissible dans le dispositif limiteur de tension est considéré comme étant inexact et n’est pas traité dans le présent document. L’expérience démontre que la probabilité d’une défaillance de l’élément de couplage est négligeable.

Visokonapetostne stikalne in krmilne naprave - 213. del: Sistem za detekcijo in indikacijo napetosti (IEC 62271-213:2021)

General Information

• Status: Published
• Publication Date: 22-Aug-2021
• ICS: 29.130.10 - High voltage switchgear and controlgear
• Technical Committee: SKA - Switchgear and control gear
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 18-Aug-2021
• Due Date: 23-Oct-2021
• Completion Date: 23-Aug-2021
• Ref Project: EN IEC 62271-213:2021 - High-voltage switchgear and controlgear - Part 213: Voltage detecting and indicating system

Relations

• Revised: SIST EN 61243-5:2002 - Live working - Voltage detectors -- Part 5: Voltage detecting systems (VDS)
• Effective Date: 05-Oct-2021
• Revised: SIST EN 62271-206:2011 - High-voltage prefabricated switchgear and controlgear assemblies - Part 206: Voltage presence indicating systems (IEC 62271-206:2011)
• Effective Date: 05-Oct-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62271-213:2021
01-oktober-2021
Visokonapetostne stikalne in krmilne naprave - 213. del: Sistem za detekcijo in
indikacijo napetosti (IEC 62271-213:2021)
High-voltage switchgear and controlgear - Part 213: Voltage detecting and indicating
system (IEC 62271-213:2021)
Hochspannungs-Schaltgeräte und -Schaltanlagen – Teil 213: Spannungsprüf- und -
anzeigesysteme (IEC 62271-213:2021)
Appareillage à haute tension - Partie 213: Système détecteur et indicateur de tension
(IEC 62271-213:2021)
Ta slovenski standard je istoveten z: EN IEC 62271-213:2021
ICS:
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
SIST EN IEC 62271-213:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62271-213:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 62271-213:2021


EUROPEAN STANDARD EN IEC 62271-213

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2021
ICS 13.260; 29.130.10; 29.240.20

English Version
High-voltage switchgear and controlgear - Part 213: Voltage
detecting and indicating system
(IEC 62271-213:2021)
Appareillage à haute tension - Partie 213: Système Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil
détecteur et indicateur de tension 213: Spannungsprüf- und -anzeigesysteme
(IEC 62271-213:2021) (IEC 62271-213:2021)
This European Standard was approved by CENELEC on 2021-07-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62271-213:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62271-213:2021
EN IEC 62271-213:2021 (E)
European foreword
The text of document 17C/787/FDIS, future edition 1 of IEC 62271-213, prepared by SC 17C
“Assemblies” of IEC/TC 17 “High-voltage switchgear and controlgear” was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 62271-213:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–04–29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–07–29
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62271-213:2021 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60999-1 NOTE Harmonized as EN 60999-1
IEC 61243-5:1997 NOTE Harmonized as EN 61243-5:2001 (modified)
IEC 61243-1:2021 NOTE Harmonized as EN IEC 61243-1:2021 (not modified)
2

---------------------- Page: 4 ----------------------
SIST EN IEC 62271-213:2021
EN IEC 62271-213:2021 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60060-1 - High-voltage test techniques - Part 1: EN 60060-1 -
General definitions and test requirements
IEC 60068-2–1 2007 Environmental testing - Part 2–1: Tests - EN 60068-2–1 2007
Test A: Cold
IEC 60068-2–2 2007 Environmental testing - Part 2–2: Tests - EN 60068-2–2 2007
Test B: Dry heat
IEC 60068-2–6 - Environmental testing - Part 2–6: Tests - EN 60068-2–6 -
Test Fc: Vibration (sinusoidal)
IEC 60068-2–11 - Environmental testing - Part 2–11: Tests - EN IEC 60068-2– -
Test Ka: Salt mist 11
IEC 60068-2–31 - Environmental testing - Part 2–31: Tests - EN 60068-2–31 -
Test Ec: Rough handling shocks, primarily
for equipment-type specimens
IEC 60068-2–38 - Environmental testing - Part 2–38: Tests - EN IEC 60068-2– -
Test Z/AD: Composite 38
temperature/humidity cyclic test
IEC 60068-2–78 - Environmental testing - Part 2–78: Tests - EN 60068-2–78 -
Test Cab: Damp heat, steady-state
IEC 60352-1 - Solderless connections - Part 1: Wrapped EN 60352-1 -
connections - General requirements, test
methods and practical guidance
IEC 60352-2 - Solderless connections - Part 2: Crimped EN 60352-2 -
connections - General requirements, test
methods and practical guidance
IEC 60352-5 - Solderless connections - Part 5: Press-inEN IEC 60352-5 -
connections - General requirements, test
methods and practical guidance
IEC 60417 - Graphical symbols for use on equipment - -
IEC 60529 - Degrees of protection provided by - -
enclosures (IP Code)
3

---------------------- Page: 5 ----------------------
SIST EN IEC 62271-213:2021
EN IEC 62271-213:2021 (E)
IEC 61000-4–2 - Electromagnetic compatibility (EMC) - PartEN 61000-4–2 -
4–2: Testing and measurement techniques
- Electrostatic discharge immunity test
IEC 61000-4–3 - Electromagnetic compatibility (EMC) - PartEN IEC 61000-4–3 -
4–3: Testing and measurement techniques
- Radiated, radio-frequency,
electromagnetic field immunity test
IEC 61010-031 2015 Safety requirements for electrical EN 61010-031 2015
equipment for measurement, control and
laboratory use - Part 031: Safety
requirements for hand-held probe
assemblies for electrical measurement and
test
+ A1 2018  + FprA1 2018
IEC 61210 - Connecting devices - Flat quick-connect EN 61210 -
terminations for electrical copper
conductors - Safety requirements
IEC 62262 - Degrees of protection provided by EN 62262 -
enclosures for electrical equipment against
external mechanical impacts (IK code)
IEC 62271-1 - High-voltage switchgear and controlgear - EN 62271-1 -
Part 1: Common specifications for
alternating current switchgear and
controlgear

4

---------------------- Page: 6 ----------------------
SIST EN IEC 62271-213:2021



IEC 62271-213

®


Edition 1.0 2021-06




INTERNATIONAL



STANDARD




NORME


INTERNATIONALE











High-voltage switchgear and controlgear –

Part 213: Voltage detecting and indicating system



Appareillage à haute tension –

Partie 213: Système détecteur et indicateur de tension
















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 13.260; 29.130.10; 29.240.20 ISBN 978-2-8322-9890-9




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------
SIST EN IEC 62271-213:2021
– 2 – IEC 62271-213:2021  IEC 2021
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Normal and special service conditions . 13
4.1 General . 13
4.2 Normal service conditions . 13
4.3 Special service conditions . 13
5 Ratings . 13
6 Design and construction . 14
6.1 General . 14
6.2 Parts of voltage detecting and indicating system . 14
6.3 VDIS description . 14
6.4 Coupling system . 16
6.5 Voltage limiting element . 17
6.6 Connecting leads . 17
6.7 Testing points . 18
6.8 Connecting points . 22
6.9 Indicator . 23
6.10 Degree of protection (IP code) . 24
6.11 Climatic requirements . 25
6.12 Mechanical requirements . 25
6.13 Electromagnetic compatibility . 26
6.14 Dielectric strength . 26
6.15 VDIS with built-in power source . 27
6.16 Marking . 28
7 Type tests . 29
7.1 General . 29
7.2 Inspection . 32
7.3 Dielectric tests . 32
7.4 Maximum current of coupling element . 33
7.5 Conditions on testing points . 33
7.6 Voltage limiting element . 34
7.7 Indication of VDIS . 34
7.8 Clear perceptibility of visual indication . 36
7.9 Phase shift . 37
7.10 Response time . 38
7.11 Non response to DC voltage . 39
7.12 Connecting leads . 39
7.13 Temperature dependence of indication . 39
7.14 Degree of protection (IP code) . 40
7.15 Damp heat . 40
7.16 Composite temperature/humidity cyclic test . 40
7.17 Vibration . 40
7.18 Mechanical impact (IK code) . 40

---------------------- Page: 8 ----------------------
SIST EN IEC 62271-213:2021
IEC 62271-213:2021  IEC 2021 – 3 –
7.19 Fall . 40
7.20 Electrostatic discharge . 41
7.21 Radiated electromagnetic fields . 41
7.22 VDIS with built-in power source . 41
8 Routine tests . 42
9 Guide to the selection of VDIS (informative) . 42
10 Information to be given with enquiries, tenders and orders . 43
10.1 General . 43
10.2 Information with enquiries and orders . 43
10.3 Information with tenders . 43
11 Transport, storage, installation, operation, maintenance and instructions for use . 44
11.1 General . 44
11.2 Installation . 44
11.3 Operating instructions . 44
11.4 Maintenance . 44
11.5 Instructions for use . 46
12 Safety . 47
13 Influence of VDIS on the environment . 47
Annex A (informative)  Derivations and formulas . 48
A.1 Threshold voltages for indication of VDIS. 48
A.2 Maximum measuring voltage of VDIS . 48
A.3 Impedances of connected devices to the testing points of VDIS . 49
A.4 Current levels of the testing points of VDIS . 50
Annex B (informative)  List of notes concerning certain countries . 51
Bibliography . 52

Figure 1 – Example of the typical structure of an integrated VDIS . 15
Figure 2 – Example of the typical structure of a separable VDIS . 16
Figure 3 – Plug and socket size and design without insulation shield . 20
Figure 4 – Plug and socket size and design with insulation shield . 21
Figure 5 – Maximum footprint dimensions of separable VDIS and example of
arrangement . 22
Figure 6 – Examples of socket-outlet arrangement for integrated VDIS . 22
Figure 7 – Connection of the voltage source . 35
Figure 8 – Test set-up for perceptibility of visual indication . 37
Figure 9 – Examples of measure of the response time . 38

Table 1 – Impedances of connected devices . 18
Table 2 – Current levels (RMS values) . 19
Table 3 – Thresholds for voltage indication . 24
Table 4 – Sequence of type tests . 30
Table 5 – List of type tests without sequence . 31
Table 6 – List of routine tests without sequence . 42

---------------------- Page: 9 ----------------------
SIST EN IEC 62271-213:2021
– 4 – IEC 62271-213:2021  IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR –

Part 213: Voltage detecting and indicating system

FOREWORD
1) The international Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes international Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. international, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the international Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62271-213 has been prepared by subcommittee 17C:Assemblies,
of IEC technical committee 17: High-voltage switchgear and controlgear.
This first edition cancels and replaces the first edition of IEC 61243-5 published in1997 and the
first edition of IEC 62271-206 published in 2011. This edition constitutes a merging of the
content of IEC 61243-5 and IEC 62271-206.
This edition includes the following significant technical changes with respect to the previous
editions of IEC 61243-5 and IEC 62271-206:
a) an optional output signal is defined to be used for multipurpose use cases;
b) only one interface is defined for voltage detecting and indicating system (VDIS);
c) the measurement of the current carrying capacity of the voltage limiting element is
considered as inaccurate and is not considered in this document. Experience shows that
the probability of failure of the coupling element is negligible.

---------------------- Page: 10 ----------------------
SIST EN IEC 62271-213:2021
IEC 62271-213:2021  IEC 2021 – 5 –
The text of this International Standard is based on the following documents:
FDIS Report on voting
17C/787/FDIS 17C/794/RVD

Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English .
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
In this document, the following print types are used:
• Terms defined in Clause 3: in italic type.
The reader's attention is drawn to the fact that Annex B lists all of the "in-some-country" clauses
on differing practices of a less permanent nature relating to the subject of this document.
A list of all parts in the IEC 62271 series, published under the general title High-voltage
switchgear and controlgear, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 11 ----------------------
SIST EN IEC 62271-213:2021
– 6 – IEC 62271-213:2021  IEC 2021
INTRODUCTION
This part of IEC 62271 has been prepared in accordance with the requirements of IEC 62271-1.
The products designed and manufactured in accordance with this document contribute to the
safety of the users, provided they are used by skilled or instructed persons, in accordance with
safe methods of work and the instructions for use.
The product covered by this document can have an impact on the environment during some or
all stages of its life cycle. These impacts can range from slight to significant, be of short-term
or long-term duration, and occur at the global, regional or local level.
IEC 62271-213 does not cover the phase comparison function of IEC 61243-5 which is covered
by the new IEC 62271-215. Unless IEC 62271-215 is not published, the relevant subclauses in
IEC 61243-5 related to UPCs are applicable.

---------------------- Page: 12 ----------------------
SIST EN IEC 62271-213:2021
IEC 62271-213:2021  IEC 2021 – 7 –
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR –

Part 213: Voltage detecting and indicating system



1 Scope
This part of IEC 62271 is applicable to the voltage detecting and indicating system (VDIS) to
be installed on indoor and outdoor high-voltage equipment.
The VDIS as defined by this document includes a coupling system per phase (capacitive,
resistive coupling or other technology) to connect to live parts (main circuit).
The VDIS is applicable on systems with nominal voltages above 1 kV and service frequencies
from 16,7 Hz up to and including 60 Hz. The VDIS is used to detect and indicate the presence
or absence of operating voltage. It is not intended to distinguish between voltage not present
(i.e. U < 10 % of nominal voltage) and dead circuit state (i.e. U = 0 V).
NOTE 1 The use of a specific means of connection to earth of the main circuit (e.g. by an earthing switch) provides
the "dead circuit" (U = 0 V) state.
NOTE 2 The VDIS has the same threshold values as the voltage presence indicating system (VPIS) (IEC 62271-
206) and the voltage detecting system (VDS) (IEC 61243-5) for not indicating presence of voltage and for detecting
an absence of operating voltage, respectively.
The VDIS is fixed on equipment such as switchgear and controlgear according to the IEC 62271
series or transformers according to their own standards.
The products designed and manufactured in accordance with this document contribute to the
safety of the users, provided they are used by skilled or instructed persons in accordance with
safe methods of work and the instructions for use.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60060-1, High-voltage test techniques – Part 1: General definitions and requirements
IEC 60068-2-1:2007, Environmental testing – Part 2-1: Tests – Test A: Cold
IEC 60068-2-2:2007, Environmental testing – Part 2-2: Tests – Test B: Dry heat
IEC 60068-2-6, Environmental testing – Part 2-6: Tests – Test Fc: Vibration (sinusoidal)
IEC 60068-2-11, Basic environmental testing procedures – Part 2-11: Tests – Test Ka: Salt mist
IEC 60068-2-31, Environmental testing – Part 2-31: Tests – Test Ec: Rough handling shocks,
primarily for equipment-type specimens
IEC 60068-2-38, Environmental testing – Part 2-38: Tests – Test Z/AD: Composite
temperature/humidity cyclic test

---------------------- Page: 13 ----------------------
SIST EN IEC 62271-213:2021
– 8 – IEC 62271-213:2021  IEC 2021
IEC 60068-2-78, Environmental testing – Part 2-78: Tests – Test Cab: Damp heat, steady state
IEC 60352-1, Solderless connections – Part 1: Wrapped connections; general requirements,
test methods and practical guidance
IEC 60352-2, Solderless connections – Part 2: Sold
...