SIST EN ISO 717-2:1997/OprA2:2004

Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation - Amendment 2 : Procedure for evaluating the weighted reduction in impact sound level by floor coverings on lightweight floors

Confirmation from ISO received concerning the CEN leadership (NT/030711)

Akustik - Bewertung der Schalldämmung in Gebäuden und von Bauteilen - Teil 2: Trittschalldämmung - Änderung 2: Verfahren zur Beurteilung der bewerteten Trittschallminderung durch Deckenauflagen auf leichten Decken (ISO 717-2:1996/DAM 2:2004)

Die vorliegende Änderung 2 zu EN ISO 717-2 definiert ein Verfahren zur Beurteilung der bewerteten Trittschallpegelminderung durch Deckenauflagen auf leichten Decken

Acoustique - Evaluation de l'isolement acoustique des immeubles et des éléments de construction - Partie 2 : Protection contre le bruit de choc - Amendement 2 : Procédure d'évaluation de la réduction du niveau de pression acoustique pondéré du bruit de choc par les revetements de sol sur des planchers légers (ISO 717-2/DAM2:2004)

-

General Information

• Status: Not Published
• ICS: 91.120.20 - Acoustics in building. Sound insulation
• Technical Committee: AKU - Acoustics
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 03-Jan-2012
• Due Date: 08-Jan-2012
• Completion Date: 03-Jan-2012
• Directive: 89/106/EEC - Construction products
• Mandate: M/100 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on precast concrete products
• Ref Project: EN ISO 717-2:1996/prA2 - Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation - Amendment 2 : Procedure for evaluating the weighted reduction in impact sound level by floor coverings on lightweight floors

Relations

• Child: SIST EN ISO 717-2:1997/A1:2006 - Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation - Amendment 1 (ISO 717-2:1996/AM 1:2006)
• Effective Date: 22-Dec-2008
• Merged Into: SIST EN ISO 717-2:1997/A1:2006 - Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation - Amendment 1 (ISO 717-2:1996/AM 1:2006)
• Effective Date: 07-Mar-2023
• Amends: SIST EN ISO 717-2:1997 - Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:1996)
• Effective Date: 22-Dec-2008
• Amends: SIST EN ISO 717-2:1997 - Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:1996)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI SIST EN ISO 717-
2:1997/OprA2:2004

PREDSTANDARD
september 2004
Acoustics - Rating of sound insulation in buildings and of building elements - Part 2:
Impact sound insulation - Amendment 2: Procedure for evaluating the weighted
reduction in impact sound level by floor coverings on lightweight floors
ICS 91.120.20 Referenčna številka
SIST EN ISO 717-
2:1997/OprA2:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
DRAFT
EN ISO 717-2:1996
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA2
June 2004
ICS
English version
Acoustics - Rating of sound insulation in buildings and of
building elements - Part 2: Impact sound insulation -
Amendment 2 : Procedure for evaluating the weighted reduction
in impact sound level by floor coverings on lightweight floors
Acoustique - Evaluation de l'isolement acoustique des
immeubles et des éléments de construction - Partie 2:
Protection contre le bruit et choc - Amendement 2:
Méthode d'évaluation de la réduction pondérée du niveau
sonore du bruit de choc par des revêtements de sol sur des
planchers
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 126.
This draft amendment A2, if approved, will modify the European Standard EN ISO 717-2:1996. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status
as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 717-2:1996/prA2:2004: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 717-2:1996/prA2:2004 (E)


Foreword

This document (EN ISO 717-2:1996/prA2:2004) has been prepared by Technical Committee
CEN/TC 126 "Acoustic properties of building products and of buildings", the secretariat of which
is held by AFNOR, in collaboration with Technical Committee ISO/TC 43 "Acoustics".

This document is currently submitted to the parallel Enquiry.

This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU
Directive(s).
2

---------------------- Page: 3 ----------------------

DRAFT AMENDMENT ISO 717-2:1996/DAmd 2
ISO/TC 43/SC 2 Secretariat: DIN
Voting begins on: Voting terminates on:
2004-06-03 2004-11-03
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Acoustics — Rating of sound insulation in buildings and of
building elements —
Part 2:
Impact sound insulation
AMENDMENT 2: Procedure for evaluating the weighted reduction in
impact sound level by floor coverings on lightweight floors
Acoustique — Évaluation de l'isolement acoustique des immeubles et des éléments de construction —
Partie 2: Protection contre le bruit de choc
AMENDEMENT 2: Méthode d'évaluation de la réduction pondérée du niveau sonore du bruit de choc par des
revêtements de sol sur des planchers légers
ICS 91.120.20

ISO/CEN PARALLEL ENQUIRY
This draft International Standard is a draft standard developed within the European Committee for
Standardization (CEN) and processed under the CEN-lead mode of collaboration as defined in the
Vienna Agreement. The document has been transmitted by CEN to ISO for circulation for ISO member
body voting in parallel with CEN enquiry. Comments received from ISO member bodies, including those
from non-CEN members, will be considered by the appropriate CEN technical body. Should this DIS be
accepted, a final draft, established on the basis of comments received, will be submitted to a parallel two-
month FDIS vote in ISO and formal vote in CEN.
In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribué
en version anglaise seulement.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
© International Organization for Standardization, 2004

---------------------- Page: 4 ----------------------

ISO/DIS 717-2
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reprod
...