SIST EN 12312-20:2005/kprA1:2008

Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units

Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 20: Ausrüstung zur Bodenstromversorgung

Matériels au sol pour aéronefs - Exigences particulières - Partie 20: Matériel d'alimentation électrique au sol

Podporna oprema na tleh za letalski promet - Posebne zahteve - 20. del: Oskrba z električno energijo

General Information

• Status: Not Published
• Public Enquiry End Date: 30-Nov-2008
• ICS: 49.100 - Ground service and maintenance equipment
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 14-Oct-2019
• Due Date: 19-Oct-2019
• Completion Date: 14-Oct-2019
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: EN 12312-20:2005/prA1 - Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units

Relations

• Consolidated By: SIST EN 12312-20:2005+A1:2009 - Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units
• Effective Date: 01-Jul-2009
• Revised: SIST EN 12312-20:2005 - Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units
• Effective Date: 01-Nov-2008

Overview

EN 12312-20:2005/prA1 (CEN) is a draft amendment to the European standard EN 12312-20:2005 covering aircraft ground support equipment - Part 20: Electrical ground power units (EGPUs). The amendment updates normative references, clarifies the relationship with the EN 1915 series of general requirements for aircraft ground support equipment, and aligns emergency‑stop and safety references with the latest ISO/CEN machinery safety standards. Annex ZB explains the standard’s relationship to EU Machinery Directive 2006/42/EC.

Key topics and technical requirements

• Conformity with EN 1915 series: EGPUs shall be used and assessed in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 (vibration), and EN 1915-4 (noise) unless otherwise specified.
• Safety and risk: References updated to EN ISO 12100:2003 (risk assessment and machine safety principles) for hazard analysis and protective measures.
• Emergency stop: Emergency stop requirements are aligned to EN ISO 13850:2008 and must meet category 0 or 1 performance for stop functionality.
• Verification and measurement: Verification methods for vibration and noise are tied to EN 1915-3 and EN 1915-4 as relevant to ensure compliant measurement and reduction practices.
• Regulatory relationship: Informative Annex ZB states that complying with the normative clauses (except 5.1.3 and 5.2.2) provides a presumption of conformity with essential requirements of Directive 2006/42/EC (Machinery Directive) once cited in the Official Journal and adopted nationally.
• Document status: This draft amendment was circulated for unique acceptance and is subject to change; it was issued in three official languages (EN/FR/DE).

Applications and intended users

This standard is practical for:

• Manufacturers and designers of electrical ground power units (EGPUs)
• Airport ground support equipment (GSE) suppliers and system integrators
• Safety engineers and compliance officers responsible for machine safety and EU conformity
• Procurement and maintenance teams at airlines and ground handling organizations
• Test laboratories and certification bodies conducting vibration, noise and safety verification

Typical applications include design validation, safety documentation, emergency‑stop design, noise and vibration testing, and demonstrating compliance with the Machinery Directive for EGPUs used in airport operations.

Related standards

• EN 12312-20:2005 (base standard)
• EN 1915-1 / EN 1915-2 / EN 1915-3 / EN 1915-4 (general requirements; vibration & noise methods)
• EN ISO 12100:2003 (risk assessment / safety of machinery)
• EN ISO 13850:2008 (emergency stop principles)
• EU Directive 2006/42/EC (Machinery Directive)

Keywords: EN 12312-20, electrical ground power units, EGPU, aircraft ground support equipment, EN 1915, EN ISO 13850, machinery directive, safety, vibration, noise.

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2008
3RGSRUQDRSUHPDQDWOHK]DOHWDOVNLSURPHW3RVHEQH]DKWHYHGHO2VNUED]
HOHNWULþQRHQHUJLMR
Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground
power units
Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 20: Ausrüstung zur
Bodenstromversorgung
Matériels au sol pour aéronefs - Exigences particulières - Partie 20: Matériel
d'alimentation électrique au sol
Ta slovenski standard je istoveten z: EN 12312-20:2005/prA1
ICS:
49.100 Oprema za servis in Ground service and
vzdrževanje na tleh maintenance equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 12312-20:2005
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
August 2008
ICS 49.100
English Version
Aircraft ground support equipment - Specific requirements - Part
20: Electrical ground power units
Matériels au sol pour aéronefs - Exigences particulières - Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil
Partie 20: Matériel d'alimentation électrique au sol 20: Ausrüstung zur Bodenstromversorgung
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 274.
This draft amendment A1, if approved, will modify the European Standard EN 12312-20:2005. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12312-20:2005/prA1:2008: E
worldwide for CEN national Members.

EN 12320-20:2005/prA1:2008 (E)
Contents Page
Foreword.3
1 Modification to the Foreword .4
2 Modification to Clause 1 .4
3 Modifications to Clause 2 .4
4 Modification to Clause 3 .4
5 Modification to 5.1.1 .4
6 Modification to 5.5.2 .4
7 Modifications to Clause 7 .
...