SIST EN ISO 12625-8:2011

Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket- immersion test method (ISO/FDIS 12625-8:2010)

This part of ISO 12625 specifies a basket-immersion test method for the determination of water-absorption time and water-absorption capacity of tissue paper and tissue products. It is expressly stated that the detection of impurities and contraries in tissue paper and tissue products be applied according to ISO 15755. For the determination of moisture content in tissue paper and tissue products, ISO 287 is applicable.

Tissue-Papier und Tissue-Produkte - Teil 8: Zeit für die Wasseraufnahme und Wasseraufnahmekapzität, Korbeintauch-Prüfverfahren (ISO/FDIS 12625-8:2010)

Dieser Teil der ISO 12625 legt Korbeintauch-Prüfverfahren (ein manuelles und ein automatisches Prüfverfahren) für die Bestimmung der Zeit für die Wasseraufnahme und für die Wasseraufnahmekapazität von Tissue-Papier und Tissue-Produkten fest.
Es wird ausdrücklich darauf hingewiesen, dass zur Erkennung von Unreinheiten und Verunreinigungen in Tissue-Papier und Tissue-Produkten ISO 15755 angewendet werden sollte.
Für die Bestimmung des Feuchtegehaltes in Tissue-Papier und Tissue-Produkten sollte ISO 287 angewendet werden.

Papier tissue et produits tissues - Partie 8: Temps d'absorption d'eau et capacité d'absorption d'eau, méthode d'essai d'immersion au panier (ISO/FDIS 12625-8:2010)

L'ISO 12625-8:2010 spécifie une méthode d'essai d'immersion au panier permettant de déterminer le temps d'absorption d'eau et la capacité d'absorption d'eau du papier tissue et des produits tissues.
Il est expressément mentionné que la détection d'impuretés ou de défauts sur les papiers tissues et les produits tissues est à effectuer conformément à l'ISO 15755.
Pour déterminer la teneur en humidité des papiers tissues et des produits tissues, l'ISO 287 s'applique.

Tissue papir in proizvodi iz tissue papirja - 8. del: Čas vpijanja vode in sposobnost vpijanja vode, preskusna metoda s potopitvijo košarice (ISO 12625-8:2010)

Ta del ISO 12625 določa preskusno metodo s potopitvijo košarice za določanje časa vpijanja vode in sposobnosti vpijanja vode tissue papirja in proizvodov iz tissue papirja. Izrecno je navedeno, da se odkrivanje nečistoč in nasprotovanj v tissue papirju in proizvodih iz tissue papirja lahko izvaja v skladu z ISO 15755. Za določanje vsebnosti vlage v tissue papirju in proizvodih iz tissue papirja se uporablja ISO 287.

General Information

• Status: Published
• Public Enquiry End Date: 30-Sep-2009
• Publication Date: 08-Mar-2011
• ICS: 85.080.20 - Tissue paper
• Technical Committee: VPK - Pulp, paper, board and products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 10-Jan-2011
• Due Date: 17-Mar-2011
• Completion Date: 09-Mar-2011
• Ref Project: EN ISO 12625-8:2010 - Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010)

Relations

• Replaces: SIST EN ISO 12625-8:2006 - Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket- immersion test method (ISO 12625-8:2006)
• Effective Date: 01-Apr-2011
• Replaces: SIST EN ISO 12625-8:2006/AC:2007 - Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket- immersion test method (ISO 12625-8:2006)
• Effective Date: 01-Apr-2011
• Replaces: SIST EN ISO 12625-8:2006 - Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket- immersion test method (ISO 12625-8:2006)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12625-8:2011
01-april-2011
1DGRPHãþD
SIST EN ISO 12625-8:2006
SIST EN ISO 12625-8:2006/AC:2007
7LVVXHSDSLULQSURL]YRGLL]WLVVXHSDSLUMDGHOýDVYSLMDQMDYRGHLQVSRVREQRVW
YSLMDQMDYRGHSUHVNXVQDPHWRGDVSRWRSLWYLMRNRãDULFH,62
Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption
capacity, basket- immersion test method (ISO/FDIS 12625-8:2010)
Tissue-Papier und Tissue-Produkte - Teil 8: Zeit für die Wasseraufnahme und
Wasseraufnahmekapzität, Korbeintauch-Prüfverfahren (ISO/FDIS 12625-8:2010)
Papier tissue et produits tissues - Partie 8: Temps d'absorption d'eau et capacité
d'absorption d'eau, méthode d'essai d'immersion au panier (ISO/FDIS 12625-8:2010)
Ta slovenski standard je istoveten z: EN ISO 12625-8:2010
ICS:
85.080.20 Tissue papir Tissue paper
SIST EN ISO 12625-8:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12625-8:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 12625-8:2011


EUROPEAN STANDARD
EN ISO 12625-8

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2010
ICS 85.060 Supersedes EN ISO 12625-8:2006
English Version
Tissue paper and tissue products - Part 8: Water-absorption
time and water-absorption capacity, basket-immersion test
method (ISO 12625-8:2010)
Papier tissue et produits tissues - Partie 8: Temps Tissue-Papier und Tissue-Produkte - Teil 8: Zeit für die
d'absorption d'eau et capacité d'absorption d'eau, méthode Wasseraufnahme und Wasseraufnahmekapzität,
d'essai d'immersion au panier (ISO 12625-8:2010) Korbeintauch-Prüfverfahren (ISO 12625-8:2010)
This European Standard was approved by CEN on 14 December 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12625-8:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12625-8:2011
EN ISO 12625-8:2010 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 12625-8:2011
EN ISO 12625-8:2010 (E)
Foreword
This document (EN ISO 12625-8:2010) has been prepared by Technical Committee CEN/TC 172 “Pulp, paper
and board”, the secretariat of which is held by DIN, in collaboration with Technical Committee ISO/TC 6
“Paper, board and pulps”.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at
the latest by June 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12625-8:2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 12625-8:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 12625-8:2011

INTERNATIONAL ISO
STANDARD 12625-8
Second edition
2010-12-15

Tissue paper and tissue products —
Part 8:
Water-absorption time and
water-absorption capacity,
basket-immersion test method
Papier tissue et produits tissues —
Partie 8: Temps d'absorption d'eau et capacité d'absorption d'eau,
méthode d'essai d'immersion au panier




Reference number
ISO 12625-8:2010(E)
©
ISO 2010

---------------------- Page: 7 ----------------------

SIST EN ISO 12625-8:2011
ISO 12625-8:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2010 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 12625-8:2011
ISO 12625-8:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12625-8 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 172, Pulp, paper and board, in collaboration with Technical Committee ISO/TC 6, Paper, board and
pulps, Subcommittee SC 2, Test methods and quality specifications for paper and board, in accordance with
the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 12625-8:2006), which has been technically
revised.
The essential change in this International Standard is the separation of the so-called “manual method” and the
excluding of the “automated method”. For more details see the Introduction.
ISO 12625 consists of the following parts, under the general title Tissue paper and tissue products:
⎯ Part 1: General principles for the use of terms
⎯ Part 3: Determination of thickness, bulking thickness and apparent bulk density
⎯ Part 4: Determination of tensile strength, stretch at break and tensile energy absorption
⎯ Part 5: Determination of wet tensile strength
⎯ Part 6: Determination of grammage
⎯ Part 7: Determination of optical properties — Measurement of brightness and colour
⎯ Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method
⎯ Part 9: Determination of ball burst strength
⎯ Part 12: Determination of tensile strength of perforated lines — Calculation of perforation efficiency
© ISO 2010 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 12625-8:2011
ISO 12625-8:2010(E)
Introduction
This part of ISO 12625 describes one principle for the determination of water-absorption properties of tissue
paper and tissue products, a principle in which sheets of the sample are inserted in a cylindrical basket, which
is immersed in water. The results are expressed as
⎯ water-absorption time, and
⎯ water-absorption capacity.
In European and international trade, both water-absorption time and water-absorption capacity represent
important parameters in the field of comparison of tissue
...