85.080 - Paper products

This document defines a method for measuring the decolouration capability of commercial products, produced using paper and board dyed in mass and/or printed with dye inks. This document does not apply to paper printed with pigment inks.

This document specifies a basic laboratory test method for deinkability, applicable to any kind of printed paper product, under alkaline conditions by means of single stage flotation deinking and fatty acid-based collector chemistry.

This document establishes general principles for the use of terms in the entire working field of tissue
paper and tissue products.
It permits the use of a common terminology in industry and commerce.
It is expressly stated that ISO 15755 applies for the detection of impurities and contraries in tissue
paper and tissue products.
For the determination of moisture content in tissue paper and tissue products, ISO 287 applies.

This document specifies a test method for the determination of the resistance to mechanical penetration
(ball burst strength procedure) of tissue paper and tissue products after wetting.

This document specifies a test method for the determination of the resistance to mechanical penetration (ball burst strength procedure) of tissue paper and tissue products after wetting.

This document establishes general principles for the use of terms in the entire working field of tissue paper and tissue products.
It permits the use of a common terminology in industry and commerce.
It is expressly stated that ISO 15755 applies for the detection of impurities and contraries in tissue paper and tissue products.
For the determination of moisture content in tissue paper and tissue products, ISO 287 applies.

This document specifies a test method for the determination of the resistance to mechanical penetration (ball burst strength procedure) of tissue paper and tissue products after wetting.

This document establishes general principles for the use of terms in the entire working field of tissue paper and tissue products. It permits the use of a common terminology in industry and commerce. It is expressly stated that ISO 15755 applies for the detection of impurities and contraries in tissue paper and tissue products. For the determination of moisture content in tissue paper and tissue products, ISO 287 applies.

This document describes a method for the determination of the flat crush resistance of a corrugating medium after laboratory fluting using an A-flute geometry.
The procedure is applicable to any corrugating medium intended to be used, after fluting, in the manufacture of corrugated board.
NOTE ISO 7263-2 describes a method to determine the flat crush resistance using a B-flute geometry.

This document describes a method for the determination of the flat crush resistance of a corrugating medium after laboratory fluting using a B-flute geometry.
The procedure is applicable to any corrugating medium intended to be used, after fluting, in the manufacture of corrugated board.
NOTE ISO 7263-1 describes a method to determine the flat crush resistance using an A-flute geometry.

This document describes a method for the determination of the flat crush resistance of a corrugating medium after laboratory fluting using an A-flute geometry. The procedure is applicable to any corrugating medium intended to be used, after fluting, in the manufacture of corrugated board. NOTE ISO 7263-2 describes a method to determine the flat crush resistance using a B-flute geometry.

This document describes a method for the determination of the flat crush resistance of a corrugating medium after laboratory fluting using a B-flute geometry. The procedure is applicable to any corrugating medium intended to be used, after fluting, in the manufacture of corrugated board. NOTE ISO 7263-1 describes a method to determine the flat crush resistance using an A-flute geometry.

This document covers physical properties and manufacturing requirements for envelopes having an address window on the flap side. It covers the main design features of the reverse envelope, notably of the flap and address window, and the materials used for the manufacturing thereof. It applies to reverse envelopes with advertising or communication printed on the plain side, eventually on its entire surface.
This document covers empty envelopes, but also finished mailpieces that have been properl...view more

This Technical Specification defines test methods and minimum requirements for paper deacidification
processes regarding their effectiveness and consistency.
It is applicable for all large scale processes which offer deacidification of acid documents made of
printed or hand-written paper.
Possible negative side effects of deacidification processes on the treated objects are not the subject of
this Technical Specification. However, some general recommendations for how to cope with these side...view more

This document specifies a test method for the determination of grammage of tissue paper and tissue
products.

This document specifies a test method for the determination of the wet tensile strength of tissue paper
and tissue products after soaking with water, using a tensile-strength-testing apparatus operating with
a constant rate of elongation.
Currently, two types of tensile-strength-testing apparatus are commercially available, one where
the test piece is positioned vertically and, for the other, horizontally. This document applies for both.
For vertical tensile-strength-testing apparatus, a de...view more

This document specifies a test method for the determination of the tensile strength, stretch at
maximum force and tensile energy absorption of tissue paper and tissue products. It uses a tensiletesting
apparatus operating with a constant rate of elongation.
It also specifies the method of calculating the tensile index and the tensile energy absorption index.
In cases where impurities and contraries have to be determined, ISO 15755[6] applies for these
detections in tissue paper and tissue p...view more

ISO 12625-4:2016 specifies a test method for the determination of the tensile strength, stretch at maximum force and tensile energy absorption of tissue paper and tissue products. It uses a tensile-testing apparatus operating with a constant rate of elongation.
It also specifies the method of calculating the tensile index and the tensile energy absorption index.
In cases where impurities and contraries have to be determined, ISO 15755[6] applies for these detections in tissue paper and tissue ...view more

ISO 12625-5:2016 specifies a test method for the determination of the wet tensile strength of tissue paper and tissue products after soaking with water, using a tensile-strength-testing apparatus operating with a constant rate of elongation.
Currently, two types of tensile-strength-testing apparatus are commercially available, one where the test piece is positioned vertically and, for the other, horizontally. This document applies for both. For vertical tensile-strength-testing apparatus, a dev...view more

ISO 12625-6:2016 specifies a test method for the determination of grammage of tissue paper and tissue products.