Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-8: Specification of environmental tests; Stationary use at underground locations

The present document specifies test methods and severities for verification of the required resistibility of equipment
according to the relevant environmental class.
The tests defined in the present document apply to stationary use at underground locations covering the environmental
conditions stated in ETSI EN 300 019-1-8 [1].

Okoljski inženiring (EE) - Okoljski pogoji in preskusi vplivov okolja na telekomunikacijsko opremo - 2-8. del: Specifikacija preskusov vplivov okolja - Fiksna uporaba na podzemnih lokacijah

General Information

Status
Published
Public Enquiry End Date
29-Feb-2020
Publication Date
07-Apr-2020
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
02-Apr-2020
Due Date
07-Jun-2020
Completion Date
08-Apr-2020

Buy Standard

Standard
SIST EN 300 019-2-8 V2.2.1:2020
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Standard
ETSI EN 300 019-2-8 V2.2.1 (2020-03) - Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-8: Specification of environmental tests; Stationary use at underground locations
English language
15 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ETSI EN 300 019-2-8 V2.1.8 (2019-12) - Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-8: Specification of environmental tests; Stationary use at underground locations
English language
15 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 300 019-2-8 V2.2.1:2020
01-junij-2020
Okoljski inženiring (EE) - Okoljski pogoji in preskusi vplivov okolja na
telekomunikacijsko opremo - 2-8. del: Specifikacija preskusov vplivov okolja -
Fiksna uporaba na podzemnih lokacijah

Environmental Engineering (EE) - Environmental conditions and environmental tests for

telecommunications equipment - Part 2-8: Specification of environmental tests;
Stationary use at underground locations
Ta slovenski standard je istoveten z: ETSI EN 300 019-2-8 V2.2.1 (2020-03)
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
33.050.01 Telekomunikacijska Telecommunication terminal
terminalska oprema na equipment in general
splošno
SIST EN 300 019-2-8 V2.2.1:2020 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 300 019-2-8 V2.2.1:2020
---------------------- Page: 2 ----------------------
SIST EN 300 019-2-8 V2.2.1:2020
ETSI EN 300 019-2-8 V2.2.1 (2020-03)
EUROPEAN STANDARD
Environmental Engineering (EE);
Environmental conditions and environmental tests for
telecommunications equipment;
Part 2-8: Specification of environmental tests;
Stationary use at underground locations
---------------------- Page: 3 ----------------------
SIST EN 300 019-2-8 V2.2.1:2020
2 ETSI EN 300 019-2-8 V2.2.1 (2020-03)
Reference
REN/EE-017006
Keywords
environment, equipment practice, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and

of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 300 019-2-8 V2.2.1:2020
3 ETSI EN 300 019-2-8 V2.2.1 (2020-03)
Contents

Intellectual Property Rights ................................................................................................................................ 4

Foreword ............................................................................................................................................................. 4

Modal verbs terminology .................................................................................................................................... 4

1 Scope ........................................................................................................................................................ 5

2 References ................................................................................................................................................ 5

2.1 Normative references ......................................................................................................................................... 5

2.2 Informative references ........................................................................................................................................ 6

3 Definition of terms, symbols and abbreviations ....................................................................................... 6

3.1 Terms .................................................................................................................................................................. 6

3.2 Symbols .............................................................................................................................................................. 6

3.3 Abbreviations ..................................................................................................................................................... 6

4 Environmental test specifications ............................................................................................................. 6

4.0 General ............................................................................................................................................................... 6

4.1 Equipment setup and configuration .................................................................................................................... 7

4.2 Performance criteria ........................................................................................................................................... 7

4.3 Specification T 8.1: Partly weatherprotected underground locations ................................................................. 7

5 Earthquake test specification .................................................................................................................. 11

5.0 General ............................................................................................................................................................. 11

5.1 Vibration response investigation ...................................................................................................................... 11

5.2 Test conditioning .............................................................................................................................................. 11

Annex A (informative): Bibliography ................................................................................................... 14

History .............................................................................................................................................................. 15

ETSI
---------------------- Page: 5 ----------------------
SIST EN 300 019-2-8 V2.2.1:2020
4 ETSI EN 300 019-2-8 V2.2.1 (2020-03)
Intellectual Property Rights
Essential patents

IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

server (https://ipr.etsi.org/).

Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

server) which are, or may be, or may become, essential to the present document.
Trademarks

The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.

ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no

right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does

not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.

Foreword

This European Standard (EN) has been produced by ETSI Technical Committee Environmental Engineering (EE).

The present document is part 2, sub-part 8 of a multi-part deliverable. Full details of the entire series can be found in

part 2, sub-part 0 [i.1].
National transposition dates
Date of adoption of this EN: 9 March 2020
Date of latest announcement of this EN (doa): 30 June 2020
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 December 2020
Date of withdrawal of any conflicting National Standard (dow): 31 December 2020
Modal verbs terminology

In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and

"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

provisions).

"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI
---------------------- Page: 6 ----------------------
SIST EN 300 019-2-8 V2.2.1:2020
5 ETSI EN 300 019-2-8 V2.2.1 (2020-03)
1 Scope

The present document specifies test methods and severities for verification of the required resistibility of equipment

according to the relevant environmental class.

The tests defined in the present document apply to stationary use at underground locations covering the environmental

conditions stated in ETSI EN 300 019-1-8 [1].
2 References
2.1 Normative references

References are either specific (identified by date of publication and/or edition number or version number) or

non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

referenced document (including any amendments) applies.

Referenced documents which are not found to be publicly available in the expected location might be found at

https://docbox.etsi.org/Reference/.

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

their long term validity.

The following referenced documents are necessary for the application of the present document.

[1] ETSI EN 300 019-1-8 (04-2003): "Environmental Engineering (EE); Environmental conditions

and environmental tests for telecommunications equipment; Part 1-8: Classification of

environmental conditions; Stationary use at underground locations".

[2] IEC 60068-2-1 (03-2007): "Environmental testing - Part 2-1: Tests - Test A: Cold".

[3] IEC 60068-2-17 (07-1994): "Basic environmental testing procedures - Part 2-17: Tests - Test Q:

Sealing".
[4] Void.
[5] ATIS T1.0600329 (2014): "Network Equipment - Earthquake Resistance".
[6] Void.

[7] IEC 60068-2-2 (07-2007): "Environmental testing - Part 2-2: Tests - Test B: Dry heat".

[8] IEC 60068-2-14 (01-2009): "Environmental testing - Part 2-14: Tests - Test N: Change of

temperature".

[9] IEC 60068-2-30 (08-2005): "Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic

(12 h + 12 h cycle)".

[10] IEC 60068-2-64 (04-2008): "Environmental testing - Part 2-64: Tests - Test Fh: Vibration,

broadband random and guidance".

[11] IEC 60068-2-27 (02-2008): "Environmental testing - Part 2-27: Tests - Test Ea and guidance:

Shock".

[12] IEC 60068-2-6 (12-2007): "Environmental testing - Part 2-6: Tests - Test Fc: Vibration

(sinusoidal)".

[13] IEC 60068-2-57 (04-2013): "Environmental testing - Part 2-57: Tests - Test Ff: Vibration -

Time-history and sine-beat method".
[14] Void.
[15] Void.
ETSI
---------------------- Page: 7 ----------------------
SIST EN 300 019-2-8 V2.2.1:2020
6 ETSI EN 300 019-2-8 V2.2.1 (2020-03)

[16] IEC 60068-2-78 (10-2012): "Environmental testing - Part 2-78: Tests - Test Cab: Damp heat,

steady state".
[17] Void.
2.2 Informative references

References are either specific (identified by date of publication and/or edition number or version number) or

non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

referenced document (including any amendments) applies.

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

their long term validity.

The following referenced documents are not necessary for the application of the present document but they assist the

user with regard to a particular subject area.

[i.1] ETSI EN 300 019-2-0: "Environmental Engineering (EE); Environmental conditions and

environmental tests for telecommunications equipment; Part 2-0: Specification of environmental

tests; Introduction".

[i.2] IEC 60068-2-68 (08-1994): "Environmental testing - Part 2-68: Tests - Test L: Dust and sand".

[i.3] IEC 60068-2 (all parts): "Environmental testing - Part 2: Tests".

[i.4] ETSI EN 300 019-1-0: "Environmental Engineering (EE); Environmental conditions and

environmental tests for telecommunications equipment; Part 1-0: Classification of environmental

conditions; Introduction".
3 Definition of terms, symbols and abbreviations
3.1 Terms

For the purposes of the present document, the terms given in ETSI EN 300 019-1-0 [i.4] apply.

3.2 Symbols

For the purposes of the present document, the symbols given in ETSI EN 300 019-1-0 [i.4] apply.

3.3 Abbreviations

For the purposes of the present document, the abbreviations given in ETSI EN 300 019-1-0 [i.4] apply.

4 Environmental test specifications
4.0 General

The equipment shall be tested in its operational state throughout the test conditions described in the present document.

The detailed descriptions of the environmental conditions shall refer to clauses 4 and 5 of ETSI EN 300 019-1-8 [1].

ETSI EN 300 019-2-0 [i.1] forms a general overview of part 2 of this multi-part deliverable.

ETSI
---------------------- Page: 8 ----------------------
SIST EN 300 019-2-8 V2.2.1:2020
7 ETSI EN 300 019-2-8 V2.2.1 (2020-03)
4.1 Equipment setup and configuration

The equipment shall be tested in its operational state throughout the test conditions described in the present document

unless otherwise stated. Input and load conditions of the equipment shall be chosen to obtain full utilization of the

equipment under test. The heat dissipation shall be maximized, except for the steady state, low temperature test, where

it shall be minimized.
4.2 Performance criteria

The following performance criteria shall apply in the tests defined by the present document.

Performance criterion A:
The equipment shall function according to the manufactu
...

ETSI EN 300 019-2-8 V2.2.1 (2020-03)
EUROPEAN STANDARD
Environmental Engineering (EE);
Environmental conditions and environmental tests for
telecommunications equipment;
Part 2-8: Specification of environmental tests;
Stationary use at underground locations
---------------------- Page: 1 ----------------------
2 ETSI EN 300 019-2-8 V2.2.1 (2020-03)
Reference
REN/EE-017006
Keywords
environment, equipment practice, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and

of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 300 019-2-8 V2.2.1 (2020-03)
Contents

Intellectual Property Rights ................................................................................................................................ 4

Foreword ............................................................................................................................................................. 4

Modal verbs terminology .................................................................................................................................... 4

1 Scope ........................................................................................................................................................ 5

2 References ................................................................................................................................................ 5

2.1 Normative references ......................................................................................................................................... 5

2.2 Informative references ........................................................................................................................................ 6

3 Definition of terms, symbols and abbreviations ....................................................................................... 6

3.1 Terms .................................................................................................................................................................. 6

3.2 Symbols .............................................................................................................................................................. 6

3.3 Abbreviations ..................................................................................................................................................... 6

4 Environmental test specifications ............................................................................................................. 6

4.0 General ............................................................................................................................................................... 6

4.1 Equipment setup and configuration .................................................................................................................... 7

4.2 Performance criteria ........................................................................................................................................... 7

4.3 Specification T 8.1: Partly weatherprotected underground locations ................................................................. 7

5 Earthquake test specification .................................................................................................................. 11

5.0 General ............................................................................................................................................................. 11

5.1 Vibration response investigation ...................................................................................................................... 11

5.2 Test conditioning .............................................................................................................................................. 11

Annex A (informative): Bibliography ................................................................................................... 14

History .............................................................................................................................................................. 15

ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 300 019-2-8 V2.2.1 (2020-03)
Intellectual Property Rights
Essential patents

IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

server (https://ipr.etsi.org/).

Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

server) which are, or may be, or may become, essential to the present document.
Trademarks

The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.

ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no

right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does

not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.

Foreword

This European Standard (EN) has been produced by ETSI Technical Committee Environmental Engineering (EE).

The present document is part 2, sub-part 8 of a multi-part deliverable. Full details of the entire series can be found in

part 2, sub-part 0 [i.1].
National transposition dates
Date of adoption of this EN: 9 March 2020
Date of latest announcement of this EN (doa): 30 June 2020
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 December 2020
Date of withdrawal of any conflicting National Standard (dow): 31 December 2020
Modal verbs terminology

In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and

"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

provisions).

"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 300 019-2-8 V2.2.1 (2020-03)
1 Scope

The present document specifies test methods and severities for verification of the required resistibility of equipment

according to the relevant environmental class.

The tests defined in the present document apply to stationary use at underground locations covering the environmental

conditions stated in ETSI EN 300 019-1-8 [1].
2 References
2.1 Normative references

References are either specific (identified by date of publication and/or edition number or version number) or

non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

referenced document (including any amendments) applies.

Referenced documents which are not found to be publicly available in the expected location might be found at

https://docbox.etsi.org/Reference/.

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

their long term validity.

The following referenced documents are necessary for the application of the present document.

[1] ETSI EN 300 019-1-8 (04-2003): "Environmental Engineering (EE); Environmental conditions

and environmental tests for telecommunications equipment; Part 1-8: Classification of

environmental conditions; Stationary use at underground locations".

[2] IEC 60068-2-1 (03-2007): "Environmental testing - Part 2-1: Tests - Test A: Cold".

[3] IEC 60068-2-17 (07-1994): "Basic environmental testing procedures - Part 2-17: Tests - Test Q:

Sealing".
[4] Void.
[5] ATIS T1.0600329 (2014): "Network Equipment - Earthquake Resistance".
[6] Void.

[7] IEC 60068-2-2 (07-2007): "Environmental testing - Part 2-2: Tests - Test B: Dry heat".

[8] IEC 60068-2-14 (01-2009): "Environmental testing - Part 2-14: Tests - Test N: Change of

temperature".

[9] IEC 60068-2-30 (08-2005): "Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic

(12 h + 12 h cycle)".

[10] IEC 60068-2-64 (04-2008): "Environmental testing - Part 2-64: Tests - Test Fh: Vibration,

broadband random and guidance".

[11] IEC 60068-2-27 (02-2008): "Environmental testing - Part 2-27: Tests - Test Ea and guidance:

Shock".

[12] IEC 60068-2-6 (12-2007): "Environmental testing - Part 2-6: Tests - Test Fc: Vibration

(sinusoidal)".

[13] IEC 60068-2-57 (04-2013): "Environmental testing - Part 2-57: Tests - Test Ff: Vibration -

Time-history and sine-beat method".
[14] Void.
[15] Void.
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 300 019-2-8 V2.2.1 (2020-03)

[16] IEC 60068-2-78 (10-2012): "Environmental testing - Part 2-78: Tests - Test Cab: Damp heat,

steady state".
[17] Void.
2.2 Informative references

References are either specific (identified by date of publication and/or edition number or version number) or

non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

referenced document (including any amendments) applies.

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

their long term validity.

The following referenced documents are not necessary for the application of the present document but they assist the

user with regard to a particular subject area.

[i.1] ETSI EN 300 019-2-0: "Environmental Engineering (EE); Environmental conditions and

environmental tests for telecommunications equipment; Part 2-0: Specification of environmental

tests; Introduction".

[i.2] IEC 60068-2-68 (08-1994): "Environmental testing - Part 2-68: Tests - Test L: Dust and sand".

[i.3] IEC 60068-2 (all parts): "Environmental testing - Part 2: Tests".

[i.4] ETSI EN 300 019-1-0: "Environmental Engineering (EE); Environmental conditions and

environmental tests for telecommunications equipment; Part 1-0: Classification of environmental

conditions; Introduction".
3 Definition of terms, symbols and abbreviations
3.1 Terms

For the purposes of the present document, the terms given in ETSI EN 300 019-1-0 [i.4] apply.

3.2 Symbols

For the purposes of the present document, the symbols given in ETSI EN 300 019-1-0 [i.4] apply.

3.3 Abbreviations

For the purposes of the present document, the abbreviations given in ETSI EN 300 019-1-0 [i.4] apply.

4 Environmental test specifications
4.0 General

The equipment shall be tested in its operational state throughout the test conditions described in the present document.

The detailed descriptions of the environmental conditions shall refer to clauses 4 and 5 of ETSI EN 300 019-1-8 [1].

ETSI EN 300 019-2-0 [i.1] forms a general overview of part 2 of this multi-part deliverable.

ETSI
---------------------- Page: 6 ----------------------
7 ETSI EN 300 019-2-8 V2.2.1 (2020-03)
4.1 Equipment setup and configuration

The equipment shall be tested in its operational state throughout the test conditions described in the present document

unless otherwise stated. Input and load conditions of the equipment shall be chosen to obtain full utilization of the

equipment under test. The heat dissipation shall be maximized, except for the steady state, low temperature test, where

it shall be minimized.
4.2 Performance criteria

The following performance criteria shall apply in the tests defined by the present document.

Performance criterion A:

The equipment shall function according to the manufacturer specifications before, during and after the tests. No

degradation of performance or loss of function is allowed below the performance level specified by the manufacturer

when the equipment is used as intended. If the minimum performance level is not specified by the manufacturer, then

this may be deduced from the product description and documentation and what the user may reasonably expect from the

equipment if used as intended.
Performance criterion B:
The equipment s
...

Draft ETSI EN 300 019-2-8 V2.1.8 (2019-12)
EUROPEAN STANDARD
Environmental Engineering (EE);
Environmental conditions and environmental tests for
telecommunications equipment;
Part 2-8: Specification of environmental tests;
Stationary use at underground locations
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 300 019-2-8 V2.1.8 (2019-12)
Reference
REN/EE-017006
Keywords
environment, equipment practice, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2019.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and

of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 300 019-2-8 V2.1.8 (2019-12)
Contents

Intellectual Property Rights ................................................................................................................................ 4

Foreword ............................................................................................................................................................. 4

Modal verbs terminology .................................................................................................................................... 4

1 Scope ........................................................................................................................................................ 5

2 References ................................................................................................................................................ 5

2.1 Normative references ......................................................................................................................................... 5

2.2 Informative references ........................................................................................................................................ 6

3 Definition of terms, symbols and abbreviations ....................................................................................... 6

3.1 Terms .................................................................................................................................................................. 6

3.2 Symbols .............................................................................................................................................................. 6

3.3 Abbreviations ..................................................................................................................................................... 6

4 Environmental test specifications ............................................................................................................. 6

4.0 General ............................................................................................................................................................... 6

4.1 Equipment setup and configuration .................................................................................................................... 7

4.2 Performance criteria ........................................................................................................................................... 7

4.3 Specification T 8.1: Partly weatherprotected underground locations ................................................................. 7

5 Earthquake test specification .................................................................................................................. 11

5.0 General ............................................................................................................................................................. 11

5.1 Vibration response investigation ...................................................................................................................... 11

5.2 Test conditioning .............................................................................................................................................. 11

Annex A (informative): Bibliography ................................................................................................... 14

History .............................................................................................................................................................. 15

ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 300 019-2-8 V2.1.8 (2019-12)
Intellectual Property Rights
Essential patents

IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

server (https://ipr.etsi.org/).

Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

server) which are, or may be, or may become, essential to the present document.
Trademarks

The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.

ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no

right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does

not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.

Foreword

This draft European Standard (EN) has been produced by ETSI Technical Committee Environmental Engineering (EE),

and is now submitted for the combined Public Enquiry and Vote phase of the ETSI standards EN Approval Procedure.

The present document is part 2, sub-part 8 of a multi-part deliverable. Full details of the entire series can be found in

part 2, sub-part 0 [i.1].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa

Date of withdrawal of any conflicting National Standard (dow): 6 months after doa

Modal verbs terminology

In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and

"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

provisions).

"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 300 019-2-8 V2.1.8 (2019-12)
1 Scope

The present document specifies test methods and severities for verification of the required resistibility of equipment

according to the relevant environmental class.

The tests defined in the present document apply to stationary use at underground locations covering the environmental

conditions stated in ETSI EN 300 019-1-8 [1].
2 References
2.1 Normative references

References are either specific (identified by date of publication and/or edition number or version number) or

non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

referenced document (including any amendments) applies.

Referenced documents which are not found to be publicly available in the expected location might be found at

https://docbox.etsi.org/Reference/.

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

their long term validity.

The following referenced documents are necessary for the application of the present document.

[1] ETSI EN 300 019-1-8 (04-2003): "Environmental Engineering (EE); Environmental conditions

and environmental tests for telecommunications equipment; Part 1-8: Classification of

environmental conditions; Stationary use at underground locations".

[2] IEC 60068-2-1 (03-2007): "Environmental testing - Part 2-1: Tests - Test A: Cold".

[3] IEC 60068-2-17 (07-1994): "Basic environmental testing procedures - Part 2-17: Tests - Test Q:

Sealing".
[4] Void.
[5] ATIS T1.0600329 (2014): "Network Equipment - Earthquake Resistance".
[6] Void.

[7] IEC 60068-2-2 (07-2007): "Environmental testing - Part 2-2: Tests - Test B: Dry heat".

[8] IEC 60068-2-14 (01-2009): "Environmental testing - Part 2-14: Tests - Test N: Change of

temperature".

[9] IEC 60068-2-30 (08-2005): "Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic

(12 h + 12 h cycle)".

[10] IEC 60068-2-64 (04-2008): "Environmental testing - Part 2-64: Tests - Test Fh: Vibration,

broadband random and guidance".

[11] IEC 60068-2-27 (02-2008): "Environmental testing - Part 2-27: Tests - Test Ea and guidance:

Shock".

[12] IEC 60068-2-6 (12-2007): "Environmental testing - Part 2-6: Tests - Test Fc: Vibration

(sinusoidal)".

[13] IEC 60068-2-57 (04-2013): "Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-

history and sine-beat method".
[14] Void.
[15] Void.
ETSI
---------------------- Page: 5 ----------------------
6 Draft ETSI EN 300 019-2-8 V2.1.8 (2019-12)

[16] IEC 60068-2-78 (10-2012): "Environmental testing - Part 2-78: Tests - Test Cab: Damp heat,

steady state".
[17] Void.
2.2 Informative references

References are either specific (identified by date of publication and/or edition number or version number) or

non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

referenced document (including any amendments) applies.

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

their long term validity.

The following referenced documents are not necessary for the application of the present document but they assist the

user with regard to a particular subject area.

[i.1] ETSI EN 300 019-2-0: "Environmental Engineering (EE); Environmental conditions and

environmental tests for telecommunications equipment; Part 2-0: Specification of environmental

tests; Introduction".

[i.2] IEC 60068-2-68 (08-1994): "Environmental testing - Part 2-68: Tests - Test L: Dust and sand".

[i.3] IEC 60068-2 (all parts): "Environmental testing - Part 2: Tests".

[i.4] ETSI EN 300 019-1-0: "Environmental Engineering (EE); Environmental conditions and

environmental tests for telecommunications equipment; Part 1-0: Classification of environmental

conditions; Introduction".
3 Definition of terms, symbols and abbreviations
3.1 Terms

For the purposes of the present document, the terms given in ETSI EN 300 019-1-0 [i.4] apply.

3.2 Symbols

For the purposes of the present document, the symbols given in ETSI EN 300 019-1-0 [i.4] apply.

3.3 Abbreviations

For the purposes of the present document, the abbreviations given in ETSI EN 300 019-1-0 [i.4] apply.

4 Environmental test specifications
4.0 General

The equipment shall be tested in its operational state throughout the test conditions described in the present document.

The detailed descriptions of the environmental conditions shall refer to clauses 4 and 5 of ETSI EN 300 019-1-8 [1].

ETSI EN 300 019-2-0 [i.1] forms a general overview of part 2 of this multi-part deliverable.

ETSI
---------------------- Page: 6 ----------------------
7 Draft ETSI EN 300 019-2-8 V2.1.8 (2019-12)
4.1 Equipment setup and configuration

The equipment shall be tested in its operational state throughout the test conditions described in the present document

unless otherwise stated. Input and load conditions of the equipment shall be chosen to obtain full utilization of the

equipment under test. The heat dissipation shall be maximized, except for the steady state, low temperature test, where

it shall be minimized.
4.2 Performance criteria

The following performance criteria shall apply in the tests defined by the present document.

Performance criterion A:

The equipment shall function according to the manufacturer specifications before, during and after the tests. No

degradation of performance or loss of function is allowed below the performance level specified by the manufacturer

when the equipment is used as intended. If the minimum performance level is not specified by the manufacturer, then

this may be deduced from the product description and documentation and what the user may reasonably expect from the

equipme
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.