SIST EN 13892-10:2025
(Main)Method of test for screed materials - Part 10: Determination of moisture content - Calcium Carbide Method
Method of test for screed materials - Part 10: Determination of moisture content - Calcium Carbide Method
This document specifies the CM method for determining the moisture content of cementitious screed, calcium sulphate screed and magnesite screed made according to EN 13813.
Prüfverfahren für Estrichmörtel und Estrichmassen - Teil 10: Messung der Feuchte mit der Calciumcarbidmethode
Dieses Dokument legt das CM Verfahren zur Bestimmung des Feuchtegehalts von Zementestrichen, Calciumsulfatestrichen und Magnesiaestrichen fest, die in Übereinstimmung mit EN 13813 hergestellt wurden.
Méthodes d’essai des matériaux pour chapes - Partie 10 : Détermination de la teneur en humidité - Méthode au carbure de calcium
Le présent document spécifie la méthode de la bombe à carbure permettant de déterminer la teneur en humidité des chapes à base de ciment, de sulfate de calcium et de magnésie préparées conformément à l’EN 13813.
Metoda preskušanja mešanice za estrih - 10. del: Določevanje deleža vlage - Metoda kalcijevega karbida
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2025
Metoda preskušanja mešanice za estrih - 10. del: Določevanje deleža vlage -
Metoda kalcijevega karbida
Method of test for screed materials - Part 10: Determination of moisture content -
Calcium Carbide Method
Prüfverfahren für Estrichmörtel und Estrichmassen - Teil 10: Messung der Feuchte mit
der Calciumcarbidmethode
Méthodes d’essai des matériaux pour chapes - Partie 10 : Détermination de la teneur en
humidité - Méthode au carbure de calcium
Ta slovenski standard je istoveten z: EN 13892-10:2025
ICS:
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 13892-10
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2025
EUROPÄISCHE NORM
ICS 91.100.10
English Version
Method of test for screed materials - Part 10:
Determination of moisture content - Calcium Carbide
Method
Méthodes d'essai des matériaux pour chapes - Partie Prüfverfahren für Estrichmörtel und Estrichmassen -
10 : Détermination de la teneur en humidité - Méthode Teil 10: Messung des Feuchtegehalts -
au carbure de calcium Calciumcarbidmethode
This European Standard was approved by CEN on 27 July 2025.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13892-10:2025 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Equipment and Gear . 4
6 Procedure . 5
7 Test report . 6
Bibliography . 7
European foreword
This document (EN 13892-10:2025) has been prepared by Technical Committee CEN/TC 303 “Floor
screeds and screed materials”, the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2026 of DOP, and conflicting national standards
shall be withdrawn at the latest by March 2026 of DOW.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
1 Scope
This document specifies the CM method for determining the moisture content of cementitious screed,
calcium sulphate screed and magnesite screed made according to EN 13813.
2 Normative references
The following documents are referred
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.