Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances

This European Standard deals with the safety of electric massage appliances for household and similar purposes, their rated voltage being not more than 250 V for single phase and 480 V for other appliances. Some examples of appliances within the scope of this standard are foot massagers, hand-held massagers, massage beds, massage chairs, massage pads and massage belts.

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-32: Besondere Anforderungen für Massagegeräte

Appareils électrodomestiques et analogues - Sécurité - Partie 2-32: Règles particulières pour les appareils de massage

IEC 60335-2-32:2019 est disponible sous forme de IEC 60335-2-32:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

L'IEC 60335-2-32:2019 traite de la sécurité des appareils électriques de massage pour usages domestiques et analogues, dont la tension assignée n'est pas supérieure à 250 V pour les appareils monophasés et à 480 V pour les autres appareils. Exemples d’appareils relevant du domaine d'application de la présente norme:
- appareils de massage des pieds;
- appareils de massage des pieds remplis d’eau;
- appareils de massage portatifs;
- lits de massage;
- ceintures de massage;
- chaises de massage;
- coussins de massage.
Les appareils non destinés à un usage domestique normal mais qui peuvent néanmoins constituer une source de danger pour le public, par exemple les appareils destinés à être utilisés par des utilisateurs non avertis dans des magasins, chez des artisans et dans des exploitations agricoles, relèvent du domaine d'application de la présente norme.
Dans la mesure du possible, la présente norme traite des dangers ordinaires présentés par les appareils et encourus par tous les individus à l'intérieur et autour de l'habitation. Cependant, elle ne tient généralement pas compte:
- des personnes (y compris des enfants) dont les capacités physiques, sensorielles ou mentales ou le manque d’expérience et de connaissance les empêchent d’utiliser l’appareil en toute sécurité sans surveillance ou instruction;
- de l’utilisation de l’appareil comme jouet par des enfants.
L’attention est attirée sur le fait que:
- pour les appareils destinés à être utilisés dans des véhicules ou à bord de navires ou d'avions, des exigences supplémentaires peuvent être nécessaires;
- dans de nombreux pays, des exigences supplémentaires sont spécifiées par les organismes nationaux de la santé, par les organismes nationaux responsables de la protection des travailleurs, par les organismes nationaux responsables de l'alimentation en eau et par des organismes similaires.
La présente norme ne s’applique pas:
- aux appareils exclusivement destinés à un usage industriel;
- aux appareils destinés à être utilisés dans des locaux présentant des conditions particulières, telles que la présence d'une atmosphère corrosive ou explosive (poussières, vapeur ou gaz);
- aux appareils électriques de soins des pieds sans moteur et aux autres appareils électriques de soins de la peau ou des cheveux (IEC 60335-2-23);
- aux appareils électriques de soins de beauté destinés à un usage domestique, commercial ou analogue (IEC 60335-2-115).
Cette cinquième édition annule et remplace la quatrième édition parue en 2002, l'Amendement 1:2008 et l'Amendement 2:2013. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- alignement du texte sur l’IEC 60335-1, Ed 5 et ses Amendements 1 et 2;
- conversion d’une note en texte normatif (11.8);
- ajout d’exigences relatives aux surfaces accessibles extérieures (Article 11);
- ajout d’exigences de stabilité alternatives relatives aux appareils portatifs (20.2);
- ajout d’un nouvel essai de résistance mécanique pour les appareils p

Gospodinjski in podobni električni aparati - Varnost - 2-32. del: Posebne zahteve za masažne aparate

General Information

Status
Published
Publication Date
22-Jul-2021
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
19-Jul-2021
Due Date
23-Sep-2021
Completion Date
23-Jul-2021

RELATIONS

Buy Standard

Standard
SIST EN IEC 60335-2-32:2021
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN IEC 60335-2-32:2021
01-september-2021
Nadomešča:
SIST EN 60335-2-32:2003
SIST EN 60335-2-32:2003/A1:2009
SIST EN 60335-2-32:2003/A2:2015

Gospodinjski in podobni električni aparati - Varnost - 2-32. del: Posebne zahteve

za masažne aparate

Household and similar electrical appliances - Safety - Part 2-32: Particular requirements

for massage appliances

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-32:

Besondere Anforderungen für Massagegeräte

Appareils électrodomestiques et analogues - Sécurité - Partie 2-32: Règles particulières

pour les appareils de massage
Ta slovenski standard je istoveten z: EN IEC 60335-2-32:2021
ICS:
13.120 Varnost na domu Domestic safety
97.170 Oprema za nego telesa Body care equipment
SIST EN IEC 60335-2-32:2021 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60335-2-32:2021
---------------------- Page: 2 ----------------------
SIST EN IEC 60335-2-32:2021
EUROPEAN STANDARD EN IEC 60335-2-32
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2021
ICS 13.120; 97.170 Supersedes EN 60335-2-32:2003 and all of its
amendments and corrigenda (if any)
English Version
Household and similar electrical appliances - Safety - Part 2-32:
Particular requirements for massage appliances
(IEC 60335-2-32:2019)

Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und

Partie 2-32: Règles particulières pour les appareils de ähnliche Zwecke - Teil 2-32: Besondere Anforderungen für

massage Massagegeräte
(IEC 60335-2-32:2019) (IEC 60335-2-32:2019)

This European Standard was approved by CENELEC on 2020-12-21. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN IEC 60335-2-32:2021 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60335-2-32:2021
EN IEC 60335-2-32:2021 (E)
European foreword

This document (EN IEC 60335-2-32:2021) consists of the text of IEC 60335-2-32:2019 prepared by

IEC/TC 61 "Safety of household and similar electrical appliances".
The following dates are fixed:

• latest date by which the document has to be implemented at national (dop) 2021-11-21

level by publication of an identical national standard or by endorsement

• latest date by which the national standards conflicting with the (dow) 2023-12-21

document have to be withdrawn
This document supersedes EN 60335-2-32:2003+A1:2008+A2:2015.

This standard shall be read in conjunction with IEC 60335-1:2010+A1:2013+A2:2016.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice

The text of the International Standard IEC 60335-2-32:2019 was approved by CENELEC as a

European Standard without any modification.

In the official version, for Bibliography, the following note has to be added for the standard indicated:

IEC 60335-2-23 NOTE Harmonized as EN 60335-2-23
IEC 60335-2-11 NOTE Harmonised as EN 60335-2-11
---------------------- Page: 4 ----------------------
SIST EN IEC 60335-2-32:2021
EN IEC 60335-2-32:2021 (E)
Annex ZC
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments)

applies.

NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:

www.cenelec.eu.
The Annex ZC of part 1 applies, except as follows:
Publication Year Title EN/HD Year
Addition
IEC 60335-2-17 - Household and similar electrical appliances EN 60335-2-17 -
- Safety - Part 2-17: Particular
requirements for blankets, pads, clothing
and similar flexible heating appliances
+A11 2019
IEC 60584-1 - Thermocouples - Part 1: EMF EN 60584-1 -
specifications and tolerances
---------------------- Page: 5 ----------------------
SIST EN IEC 60335-2-32:2021
---------------------- Page: 6 ----------------------
SIST EN IEC 60335-2-32:2021
IEC 60335-2-32
Edition 5.0 2019-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Household and similar electrical appliances – Safety –
Part 2-32: Particular requirements for massage appliances
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-32: Exigences particulières pour les appareils de massage
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.120; 97.170 ISBN 78-2-8322-7391-3

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 60335-2-32:2021
– 2 – IEC 60335-2-32:2019  IEC 2019
CONTENTS

FOREWORD ........................................................................................................................... 3

INTRODUCTION ..................................................................................................................... 5

1 Scope .............................................................................................................................. 6

2 Normative references ...................................................................................................... 7

3 Terms and definitions ...................................................................................................... 7

4 General requirement ........................................................................................................ 8

5 General conditions for the tests ....................................................................................... 8

6 Classification ................................................................................................................... 8

7 Marking and instructions .................................................................................................. 8

8 Protection against access to live parts ............................................................................. 8

9 Starting of motor-operated appliances ............................................................................. 8

10 Power input and current ................................................................................................... 8

11 Heating ............................................................................................................................ 9

12 Void ............................................................................................................................... 10

13 Leakage current and electric strength at operating temperature ..................................... 10

14 Transient overvoltages .................................................................................................. 10

15 Moisture resistance ....................................................................................................... 10

16 Leakage current and electric strength ............................................................................ 10

17 Overload protection of transformers and associated circuits .......................................... 11

18 Endurance ..................................................................................................................... 11

19 Abnormal operation ....................................................................................................... 11

20 Stability and mechanical hazards ................................................................................... 11

21 Mechanical strength ...................................................................................................... 12

22 Construction .................................................................................................................. 12

23 Internal wiring ................................................................................................................ 13

24 Components .................................................................................................................. 13

25 Supply connection and external flexible cords ............................................................... 13

26 Terminals for external conductors .................................................................................. 13

27 Provision for earthing .................................................................................................... 13

28 Screws and connections ................................................................................................ 13

29 Clearances, creepage distances and solid insulation ..................................................... 13

30 Resistance to heat and fire ............................................................................................ 13

31 Resistance to rusting ..................................................................................................... 14

32 Radiation, toxicity and similar hazards ........................................................................... 14

Annexes ............................................................................................................................... 15

Bibliography .......................................................................................................................... 16

Figure 101 – Probe for measuring surface temperatures ....................................................... 14

Table 101 – Maximum temperature rises for specified external accessible surfaces

under normal operating conditions ........................................................................................ 10

---------------------- Page: 8 ----------------------
SIST EN IEC 60335-2-32:2021
IEC 60335-2-32:2019  IEC 2019 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-32: Particular requirements for massage appliances
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 60335-2-32 has been prepared by IEC technical committee 61:

Safety of household and similar electrical appliances.

This fifth edition cancels and replaces the fourth edition published in 2002, Amendment 1:

2008 and Amendment 2:2013. This edition constitutes a technical revision.

This edition includes the following significant technical changes with respect to the previous

edition:
– aligns the text with IEC 60335-1, Ed 5, and its Amendments 1 and 2;
– note is converted to normative text (11.8);

– additional requirements for temperatures of external accessible surfaces (Clause 11);

– alternative stability requirements for hand-held appliances (20.2);
– new mechanical strength test for hand-held appliances (21.1, 21.101).
---------------------- Page: 9 ----------------------
SIST EN IEC 60335-2-32:2021
– 4 – IEC 60335-2-32:2019  IEC 2019
The text of this International Standard is based on the following documents:
CDV Report on voting
61/5747/CDV 61/5840A/RVC

Full information on the voting for the approval of this International Standard can be found in

the report on voting indicated in the above table.

This document has been drafted in accordance with the ISO/IEC Directives, Part 2.

This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its

amendments. It was established on the basis of the fifth edition (2010) of that standard.

NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1.

This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to

convert that publication into the IEC standard: Safety requirements for massage appliances.

When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies

as far as is reasonable. When this standard states “addition”, “modification” or “replacement”,

the relevant text in Part 1 is to be adapted accordingly.
NOTE 2 The following numbering system is used:

– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;

– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including

those in a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
NOTE 3 The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.

Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the

associated noun are also in bold.

The committee has decided that the contents of this document will remain unchanged until the

stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to

the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing

organizations may need a transitional period following publication of a new, amended or revised IEC publication in

which to make products in accordance with the new requirements and to equip themselves for conducting new or

revised tests.

It is the recommendation of the committee that the content of this publication be adopted for implementation

nationally not earlier than 12 months or later than 36 months from the date of publication.

The following differences exist in the countries indicated below.

– 6.1: Class 0 portable appliances and Class I portable appliances are allowed (USA).

---------------------- Page: 10 ----------------------
SIST EN IEC 60335-2-32:2021
IEC 60335-2-32:2019  IEC 2019 – 5 –
INTRODUCTION

It has been assumed in the drafting of this International Standard that the execution of its

provisions is entrusted to appropriately qualified and experienced persons.
This standard recogn
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.