oSIST prEN ISO 10256-1:2022
(Main)Protective equipment for use in ice hockey - Part 1: General requirements (ISO/DIS 10256-1:2021)
Protective equipment for use in ice hockey - Part 1: General requirements (ISO/DIS 10256-1:2021)
Schutzausrüstung zum Gebrauch beim Eishockey - Teil 1: Allgemeine Anforderungen (ISO/DIS 10256-1:2021)
ISO 10256-1:202x legt allgemeine Anforderungen und Prüfverfahren für Kopf-, Gesichts-, Hals- und Körperschützer (nachstehend als Schützer bezeichnet) zum Gebrauch beim Eishockey fest und ist dazu vorgesehen, zusammen mit anderen Ergänzungsnormen der Normenreihe ISO 10256 verwendet zu werden.
ISO 10256-1:202x ist lediglich für Schützer zum Gebrauch beim Eishockey vorgesehen. Für die folgenden Punkte sind Anforderungen angegeben:
a) Begriffe;
b) Werkstoffe und Konstruktion;
c) Grenzabweichungen;
d) Konditionierung;
e) Prüfbericht;
f) Kennzeichnungen; und
g) Benutzerinformation.
In der Normenreihe ISO 10256 legen Ergänzungsnormen Leistungsanforderungen an Schützer zum Gebrauch beim Eishockey fest und sind vorgesehen, zusammen mit diesem Teil von ISO 10256 verwendet zu werden.
ANMERKUNG 1 Die in einem Abschnitt angegebenen Anforderungen haben Vorrang vor einem Bild.
ANMERKUNG 2 Der Zweck ist die Verringerung des Risikos von Verletzungen eines Eishockeyspielers, ohne die Form oder die Attraktivität des Spiels zu beeinflussen. Diese Normen setzen voraus, dass die Spielregeln für Eishockey von den Spielern befolgt und von Schiedsrichtern durchgesetzt werden.
Équipements de protection destinés à être utilisés en hockey sur glace - Partie 1: Exigences générales (ISO/DIS 10256-1:2021)
Varovalna oprema za uporabo pri hokeju na ledu - 1. del: Splošne zahteve (ISO/DIS 10256-1:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 10256-1:2022
01-januar-2022
Varovalna oprema za uporabo pri hokeju na ledu - 1. del: Splošne zahteve (ISO/DIS
10256-1:2021)
Protective equipment for use in ice hockey - Part 1: General requirements (ISO/DIS
10256-1:2021)
Schutzausrüstung zum Gebrauch beim Eishockey - Teil 1: Allgemeine Anforderungen
(ISO/DIS 10256-1:2021)
Équipements de protection destinés à être utilisés en hockey sur glace - Partie 1:
Exigences générales (ISO/DIS 10256-1:2021)
Ta slovenski standard je istoveten z: prEN ISO 10256-1
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
97.220.20 Oprema za zimske športe Winter sports equipment
oSIST prEN ISO 10256-1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 10256-1:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 10256-1:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10256-1
ISO/TC 83/SC 5 Secretariat: SCC
Voting begins on: Voting terminates on:
2021-11-16 2022-02-08
Protective equipment for use in ice hockey —
Part 1:
General requirements
ICS: 13.340.20; 97.220.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 10256-1:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2021
---------------------- Page: 3 ----------------------
oSIST prEN ISO 10256-1:2022
ISO/DIS 10256-1:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 10256-1:2022
ISO/DIS 10256-1:2021(E)
Contents Page
Foreword .iv
European foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 2
4.1 Materials . 2
4.2 Construction . 2
5 Test methods . 3
5.1 Materials . 3
5.2 Inspection . 3
6 Tolerances . 3
7 Conditioning requirements . 3
7.1 Laboratory environment . 3
7.2 Ambient sample conditioning . 3
7.3 Low temperature sample conditioning . 3
7.4 Elevated temperature sample conditioning . 3
8 Test report . 3
9 Markings . 4
10 Information for users . 4
Bibliography . 6
iii
© ISO 2021 – All rights reserved
---------------------- Page: 5 ----------------------
oSIST prEN ISO 10256-1:2022
ISO/DIS 10256-1:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 83, Sports and other recreational facilities
and equipment, Subcommittee SC 5, Ice hockey equipment and facilities.
This second edition cancels and replaces the first edition (ISO 10256-1:2016), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— Revised Clause 4 and added corresponding test methods.
A list of all parts in the ISO 10256 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
© ISO 2021 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 10256-1:2022
ISO/DIS 10256-1:2021(E)
European foreword
This document (ISO 10256-1:202x) has been prepared by Technical Committee ISO/TC 83, “Sports and
other recreational facilities and equipment” /SC 5 “Ice hockey equipment and facilities” in collaboration
with Technical Committee CEN/TC 158 “Head protection” the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by Month 202x, and conflicting national standards shall
be withdrawn at the latest by Month 202x.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic
of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 10256-1:202x has been approved by CEN as ISO 10256-1:202x without any modification.
v
© ISO 2021 – All rights reserved
---------------------- Page: 7 ----------------------
oSIST prEN ISO 10256-1:2022
ISO/DIS 10256-1:2021(E)
Introduction
Ice hockey is a high speed, collision sport in which there is a risk o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.