SIST EN 3660-005:2019
(Main)Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief - Product standard
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief - Product standard
This document defines a range of cable outlets, style A, 90°, unsealed with clamp strain relief for use under the following conditions:
Associated electrical connector(s) : EN 3660-002
Temperature range, Class N : - 65 °C to 200 °C
Class W : - 65 °C to 175 °C
Class K : - 65 °C to 260 °C
Class A : - 65 °C to 260 °C
Class T : - 65 °C to 175 °C (Nickel PTFE plating)
Class Z : - 65 °C to 175 °C (Black zinc nickel plating)
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 005: Endgehäuse, Bauform A, 90° Ausführung, nicht abgedichtet, mit Zugentlastungsklemme - Produktnorm
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 005 : Raccord coudé à 90° non étanche type A avec brides serre-câbles - Norme de produit
Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 005. del: Kabelska spojka, tip A, 90°, netesnjena, z razbremenilno sponko - Standard za proizvod
Ta dokument določa različne vrste kabelskih spojk tipa A, 90°, netesnjenih (z razbremenilno sponko) za uporabo pod naslednjimi pogoji:
Povezani električni konektorji : EN 3660-002
Temperaturno območje: Razred N : od −65 °C do 200 °C
Razred W : od −65 °C do 175 °C
Razred K : od −65 °C do 260 °C
Razred A : od −65 °C do 260 °C
Razred T : od −65 °C do 175 °C (nikljeva prevleka PTFE)
Razred Z : od −65 °C do 175 °C (črna cink-nikljeva prevleka)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 005: Endgehäuse, Bauform A, 90° Ausführung, nicht abgedichtet, mit Zugentlastungsklemme - ProduktnormSérie aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 005 : Raccord coudé à 90° non étanche type A avec brides serre-câbles - Norme de produitAerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief - Product standard49.060Aerospace electric equipment and systems31.220.10Plug-and-socket devices. ConnectorsICS:Ta slovenski standard je istoveten z:EN 3660-005:2018SIST EN 3660-005:2019en,fr,de01-januar-2019SIST EN 3660-005:2019SLOVENSKI
STANDARDSIST EN 3660-005:20101DGRPHãþD
SIST EN 3660-005:2019
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3660-005
October
t r s z ICS
v {ä r x r Supersedes EN
u x x ræ r r wã t r r {English Version
Aerospace series æ Cable outlet accessories for circular and rectangular electrical and optical connectors æ Part
r r wã Cable outletá style Aá
{ r ¹á unsealed with clamp strain relief æ Product standard Série aérospatiale æ Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques æ Partie
r r w ã Raccordá type Aá coudé à
{ r ¹á non étancheá avec brides serreæcâbles æ Norme de produit
Luftæ und Raumfahrt æ Endgehäuse für elektrische und optische Rundæ und Rechtecksteckverbinder æ Teil
r r wã Endgehäuseá Bauform Aá
{ r ¹ Ausführungá nicht abgedichtetá mit Zugentlastungsklemme æ Produktnorm This European Standard was approved by CEN on
s s June
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
u x x ræ r r wã t r s z ESIST EN 3660-005:2019
EN 3660-005:2018 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Characteristics . 4 5 Designation. 11 6 Marking . 11 7 Technical specification . 11
SIST EN 3660-005:2019
EN 3660-005:2018 (E) 3 European foreword This document (EN 3660-005:2018) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2019, and conflicting national standards shall be withdrawn at the latest by April 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 3660-005:2009. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
SIST EN 3660-005:2019
EN 3660-005:2018 (E) 4 1 Scope This European Standard defines a range of cable outlets, style A, 90°, unsealed with clamp strain relief for use under the following conditions: Associated electrical connector(s) : EN 3660-002 Temperature range, Class N : − 65 °C to 200 °C
Class W : − 65 °C to 175 °C
Class K : − 65 °C to 260 °C
Class A : − 65 °C to 260 °C 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591- *, Aerospace series — Elements of electrical and optical connection — Test methods EN 2997 (all parts), Aerospace series
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak EN 3660-001, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 001: Technical specification EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 002: Index of product standards 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3660-001 apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses:
IEC Electropedia: available at http://www.electropedia.org/
ISO Online browsing platform: available at http://www.iso.org/obp 4 Characteristics 4.1 Dimensions and mass For dimensions and mass, see Figure 1 and Table 1. For interface dimensions, see 4.2.
* All parts quoted in this European Standard. SIST EN 3660-005:2019
EN 3660-005:2018 (E) 5 Dimensi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.