oSIST prEN IEC 60598-1:2023
(Main)Luminaires - Part 1: General requirements and tests
Luminaires - Part 1: General requirements and tests
Leuchten - Teil 1: Allgemeine Anforderungen und Prüfungen
Luminaires - Partie 1: Exigences générales et essais
Svetilke - 1. del: Splošne zahteve in preskusi
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 60598-1:2023
01-maj-2023
Svetilke - 1. del: Splošne zahteve in preskusi
Luminaires - Part 1: General requirements and tests
Leuchten - Teil 1: Allgemeine Anforderungen und Prüfungen
Luminaires - Partie 1: Exigences générales et essais
Ta slovenski standard je istoveten z: prEN IEC 60598-1:2023
ICS:
29.140.40 Svetila Luminaires
oSIST prEN IEC 60598-1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 60598-1:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60598-1:2023
34D/1690/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60598-1 ED10
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-03-10 2023-06-02
SUPERSEDES DOCUMENTS:
34D/1643/CD, 34D/1653A/CC
IEC SC 34D : LUMINAIRES
SECRETARIAT: SECRETARY:
United Kingdom Ms Shanti Conn
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of
• any relevant patent rights of which they are aware and to provide supporting documentation ,
• any relevant “in some countries” clauses to be included should this proposal proceed. Recipients are reminded
that the enquiry stage is the final stage for submitting "in some countries" clauses. See AC/22/2007.
TITLE:
Luminaires - Part 1: General requirements and tests
PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
Project Leader: Franco Rusnati
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60598-1:2023
IEC CDV 60598-1 © IEC 2023 2 34D/1690/CDV
Introduction to this CDV for National Committees (Not part of the proposal)
This CDV has been prepared by 34D/WG1 LUMEX, supported by the SC34D Editing Team EG3 and
th
IEC Central Office editing staff. For this new 10 Edition of the standard the main task has been to
conduct a complete editorial review of the standard to align with the most recent IEC directives and
editing rules. The editing tasks associated with this work being as follows:
• Review complete standard to address correct editing of notes
• Rename ‘Sections’ to ‘Clauses’
• Review the placement of terms/definitions, together with alignment to IEV
• Review the full standard to address any issues of hanging paragraphs
• Review the numbering and placement of tables
• Review the standard for the correct formatting and placement of figures
• Review diagrams/figures and move to main body of standard
• Review of the normative references
• Review any open IEC Editor comments from preparation of Edition 9.0
• Consider any consequences for IEC 60598 Part 2’s & IEC 60570
• Check all cross referencing within the document
Particular attention is drawn to the new Annex V of the document that gives details of the structure of
this new Edition 10.0 compared to the preceding Edition 9.0. This Annex will provide an important
interim ‘translation tool’ allowing Edition 10.0 to be used immediately with the existing Part 2’s of IEC
60598 and IEC 60570. New projects to update all of the IEC 60598 Part 2 standards, and IEC 60570,
to fully align with the new Part 1 structure will commence following the publication of this Edition 10.
Due to the large number of IEC 60598 Part 2 standards parallel updating of these documents, at the
same time as establishing this new Part 1, was considered impractical.
Also introduced into this new Edition 10 are technical changes that have been listed in Annex O
considering all retest requirements introduced by different fragments These comprise of the following
proposals that have already been consulted and developed the input from the national committees:
IEC 60598-1 – FRAG 0 34D/1390/DC
revision of clause 4.32 SPD and SPC 34D/1419A/INF
34D/1534/CD
34D/1549A/CC
34D/1563/CD
34D/1585A/CC
34D/1585B/CC
34D/1563/CD
IEC 60598-1 - FRAG 1 34D/1490/DC
Use of term live part, active part and current currying part 34D/1510A/INF
34D/1538/CD
34D/1555A/CC
34D/1555B/CC
IEC 60598-1 – FRAG 2 34D/1489/DC
Revision of 4.14.2 for conductor mechanical stress 34D/1509A/INF
34D/1539/CD
34D/1556A/CC
34D/1556B/CC
IEC 60598-1. FRAG 3 34D/1505/DC
Revision Clause 12.5.1, Item 4 to include controlgear 34D/1526A/INF
34D/1544/CD
34D/1566A/CC
34D/1566B/CC
IEC 60598-1 - FRAG 4 34D/1504/DC
34D/1525A/INF
---------------------- Page: 4 ----------------------
oSIST prEN IEC 60598-1:2023
IEC CDV 60598-1 © IEC 2023 3 34D/1690/CDV
Subclause 7.2.1 Earthing (deletion of the word 34D/1545/CD
‘permanently’) 34D/1567A/CC
34D/1567B/CC
IEC 60598-1- FRAG 5 34D/1514/DC
Annex Q, earth continuity test 34D/1530/INF
34D/1530A/INF
34D/1553/CD
34D/1575A/CC
34D/1575B/CC
IEC 60598-1 - FRAG 6 34D/1451/DC
Suspension by magnet 34D/1472A/INF
34D/1506/DC
34D/1527A/INF
34D/1559/CD
34D/1581A/CC
34D/1594/CD
34D/1603A/CC
IEC 60598-1 – FRAG 7 34D/1109/DC
Luminaires using batteries 34D/1123/INF
34D/1564/CD
34D/1586A/CC
34D/1609/CD
34D/1620A/CC
IEC 60598-1 – FRAG 8 34D/1473/DC
Marking requirement for nature of supply 34D/1485A/INF
34D/1582/CD
34D/1598A/CC
IEC 60598-1 – FRAG 9 34/692/DC
Insulation of SELV circuits 34/708A/INF
34D/1591/CD
34D/1605A/CC
IEC 60598-1 – FRAG 10 34D/1592/CD
Information to be provided for luminaire having protective 34D/1606A/CC
earth current > 10mA
IEC 60598-1 – FRAG 11 34D/1286/DC
Serviceable components 34D/1303/INF
34D/1540/DC
34D/1561A/INF
34D/1597/CD
34D/1615A/CC
34D/1631/CD
34D/1647A/CC
IEC 60598-1 – FRAG 12 34D/1547/DC
Annex D, Draught - proof enclosure 34D/1569A/INF
34D/1608/CD
34D/1618/CC
34D/1618A/CC
IEC 60598-1 - FRAG 13 34D/1491/DC
Inconsistencies in the inclusion of the limits of voltage 34/1513A/INF
ranges 34/1610/CD
34D/1621/CC
34D/1621A/CC
---------------------- Page: 5 ----------------------
oSIST prEN IEC 60598-1:2023
IEC CDV 60598-1 © IEC 2023 4 34D/1690/CDV
IEC 60598-1 - FRAG 14 34D/1611/CD
Revision of clause 7.2.10 for looping in. 34D/1619/CC
34D/1619A/CC
IEC 60598-1 - FRAG 15 34D/1613/CD
Request for editorial changes. 34D/1624/CC
IEC 60598-1 - FRAG XX 34D/1488/DC
Reference to switch standard 61058 34D/1507A/INF
34D/1520/DC
34D/1535A/INF
IEC 60598-1 – FRAG YY 34D_WG1(NK)009A
Proposal of drip-proof (15°) symbol
IEC 60598-1: FRAG 16 34D/1664/CD
Photobiological safety 34D/1677A/CC
---------------------- Page: 6 ----------------------
oSIST prEN IEC 60598-1:2023
IEC CDV 60598-1 © IEC 2023 5 34D/1690/CDV
In considering this CDV national committees are requested to limit their comments to those
associated with the editorial updating of this draft and those associated with the technical
amendment fragments detailed in this introduction. Technical comments to the wider content of
the standard are invited but should be introduced as full proposals to SC34D WG1 LUMEX,
either directly from the national committee or via the national committees’ experts assigned as
members of the working group. These proposals will then be considered in their full context for
updating of IEC 60598-1. The reason for this restriction is to keep the workload of this already
substantial project manageable, and with the possibility to deliver this revision of IEC 60598 -1
within a reasonable time period.
END OF CDV INTRODUCTION FOR NATIONAL COMMITTEES
---------------------- Page: 7 ----------------------
oSIST prEN IEC 60598-1:2023
IEC CDV 60598-1 © IEC 2023 6 34D/1690/CDV
1 CONTENTS
2
3 FOREWORD . 15
4 INTRODUCTION . 18
5 1 Scope . 19
6 2 Normative references . 19
7 3 Terms and definitions . 22
8 4 General requirements . 44
9 4.1 General . 44
10 4.2 General test requirements and verification . 44
11 4.3 Components of luminaires . 46
12 4.4 Information for luminaire design in light sources standards . 46
13 5 Classification of luminaires . 47
14 5.1 General . 47
15 5.2 Classification according to type of protection against electric shock . 47
16 5.3 Classification according to degree of protection against ingress of dust, solid
17 objects and moisture . 47
18 5.4 Classification according to material of mounting surface for which the
19 luminaire is designed . 47
20 5.5 Classification according to the circumstances of use . 48
21 6 Marking . 48
22 6.1 General . 48
23 6.2 Marking on luminaires . 48
24 6.3 Information to be marked on luminaires . 50
25 6.4 Additional information . 59
26 6.5 Test of marking . 64
27 7 Construction . 66
28 7.1 General . 66
29 7.2 Replaceable components . 66
30 7.3 Wireways . 66
31 7.4 Lampholders . 66
32 7.5 Starterholders . 68
33 7.6 Terminal blocks. 68
34 7.7 Terminals and supply connections . 69
35 7.8 Switches . 71
36 7.9 Insulating linings and sleeves . 71
37 7.10 Double and reinforced insulation . 72
38 7.11 Electrical connections and current-carrying parts . 74
39 7.12 Screws and connections (mechanical) and glands . 76
40 7.13 Mechanical strength . 79
41 7.14 Suspensions, fixings and means of adjustment . 81
42 7.15 Flammable materials . 85
43 7.16 Luminaires for mounting on normally flammable surfaces . 87
44 7.17 Drain holes . 88
45 7.18 Resistance to corrosion . 88
46 7.19 Ignitors . 89
47 7.20 Rough service luminaires . 89
48 7.21 Protective shield . 91
---------------------- Page: 8 ----------------------
oSIST prEN IEC 60598-1:2023
IEC CDV 60598-1 © IEC 2023 7 34D/1690/CDV
49 7.22 Attachments to lamps. 92
50 7.23 Semi-luminaires . 92
51 7.24 Photobiological hazards . 92
52 7.24.1 Actinic UV hazards exposure for skin and eye (200 nm to 400 nm) . 92
53 7.24.2 UV-A hazard assessment for the eye lens (315 nm to 400 nm) . 93
54 7.24.3 Retinal blue light hazard . 93
55 7.25 Mechanical hazard . 94
56 7.26 Short-circuit protection . 95
57 7.27 Terminal blocks with integrated screwless protective earthing contacts . 96
58 7.28 Fixing of thermal sensing controls . 96
59 7.29 Luminaire with non-replaceable light source . 97
60 7.30 Luminaires with non-user replaceable light sources and non-user
61 serviceable components. 97
62 7.31 Insulation between circuits . 97
63 7.31.1 General . 97
64 7.31.2 SELV or PELV circuits . 98
65 7.31.3 FELV circuits . 99
66 7.31.4 Other circuits . 99
67 7.31.5 Additional requirement for luminaires using controllable controlgear
68 providing SELV output(s) . 100
69 7.32 Overvoltage protective devices external to controlgear . 100
70 7.32.1 General . 100
71 7.32.2 Surge Protective Devices (SPDs) . 100
72 7.32.3 Surge Protective Components (SPCs) . 101
73 7.33 Luminaire powered via information technology communication cabling . 103
74 7.34 Electromagnetic fields (EMF) . 103
75 7.35 Protection against moving fan blades . 103
76 7.36 Track-mounted luminaires . 104
77 8 External and internal wiring . 105
78 8.1 General . 105
79 8.2 Supply connection and other external wiring . 105
80 8.3 Internal wiring . 113
81 8.4 Test to determine suitability of conductors having a reduced cross-sectional
82 area . 115
83 9 Provision for earthing . 116
84 9.1 General . 116
85 9.2 Provision for earthing . 116
86 10 Protection against electric shock . 120
87 10.1 General . 120
88 10.2 Protection against electric shock . 120
89 11 Resistance to dust, solid objects and moisture . 124
90 11.1 General . 124
91 11.2 General conditions and tests for IP classification . 124
92 11.2.1 General . 124
93 11.2.2 Tests for first characteristics IP numeral 2, 3 and 4 . 126
94 11.2.3 Tests for first characteristic IP numeral 5 and 6 . 126
95 11.2.4 Drip-proof luminaires - Tests for second characteristic IP numeral 1 . 127
96 11.2.5 Drip-proof luminaires - Tests for second characteristic IP numeral 2 . 128
97 11.2.6 Rain-proof luminaires - Tests for second characteristic IP numeral 3 . 128
98 11.2.7 Splash-proof luminaires - Tests for second characteristic IP numeral 4 . 129
---------------------- Page: 9 ----------------------
oSIST prEN IEC 60598-1:2023
IEC CDV 60598-1 © IEC 2023 8 34D/1690/CDV
99 11.2.8 Jet-proof luminaires - Tests for second characteristic IP numeral 5 . 129
100 11.2.9 Powerful jet-proof luminaires - Tests for second characteristic IP
101 numeral 6 . 130
102 11.2.10 Watertight luminaires - Tests for second characteristic IP numeral 7 . 130
103 11.2.11 Pressure watertight luminaires - Tests for second characteristic IP
104 numeral 8 . 130
105 11.2.12 High pressure and temperature water jet-proof luminaires - Tests for
106 second characteristics IP numeral 9 (80 °C) . 130
107 11.2.13 High pressure and cold water jet-proof luminaires - Tests for second
108 characteristic IP numeral 9 (15 °C) . 130
109 11.3 Humidity test . 130
110 12 Insulation resistance and electric strength, touch current and protective conductor
111 current . 132
112 12.1 General . 132
113 12.2 Insulation resistance and electric strength . 132
114 12.2.1 General . 132
115 12.2.2 Test – Insulation resistance . 132
116 12.2.3 Test – Electric strength . 134
117 12.3 Touch current, protective conductor current and electric burn . 136
118 13 Creepage distances and clearances . 138
119 13.1 General . 138
120 13.2 Creepage distances and clearances . 138
121 13.2.1 General . 138
122 13.2.2 Creepage distances . 139
123 13.2.3 Clearances . 140
124 14 Endurance test and thermal test . 142
125 14.1 General . 142
126 14.2 Selection of lamps and controlgear . 142
127 14.3 Endurance test . 142
128 14.3.1 General . 142
129 14.3.2 Test . 142
130 14.3.3 Compliance . 144
131 14.4 Thermal test (normal operation) . 144
132 14.4.1 General . 144
133 14.4.2 Test . 144
134 14.4.3 Compliance . 146
135 14.5 Thermal test (abnormal operation) . 149
136 14.5.1 General . 149
137 14.5.2 Test . 150
138 14.5.3 Compliance . 151
139 14.6 Thermal test (failed windings in controlgear) . 154
140 14.6.1 General . 154
141 14.6.2 Test for luminaires without thermal cut-outs . 154
142 14.6.3 Test for luminaires with temperature sensing controls . 154
143 14.7 Thermal test in regard to fault conditions in controlgear or electronic devices
144 incorporated in thermoplastic luminaires . 156
145 14.7.1 General . 156
146 14.7.2 Test for luminaires without temperature sensing controls . 156
147 14.7.3 Test for luminaires with temperature sensing controls internal/external
148 to the ballast or transformer . 158
---------------------- Page: 10 ----------------------
oSIST prEN IEC 60598-1:2023
IEC CDV 60598-1 © IEC 2023 9 34D/1690/CDV
149 15 Resistance to heat, fire and tracking . 160
150 15.1 General . 160
151 15.2 Resistance to heat . 160
152 15.3 Resistance to flame and ignition . 161
153 15.4 Resistance to tracking . 161
154 16 Screw terminals . 163
155 16.1 General . 163
156 16.2 General requirements and basic principles . 168
157 16.3 Mechanical tests . 171
158 17 Screwless terminals and electrical connections . 175
159 17.1 General . 175
160 17.2 General requirements . 177
161 17.3 General instructions on tests . 179
162 17.3.1 Preparation of samples . 179
163 17.3.2 Test conductors . 179
164 17.3.3 Multi-conductor terminals . 179
165 17.3.4 Multi-way terminals . 179
166 17.3.5 Test quantities . 179
167 17.4 Terminal and connections for internal wiring . 179
168 17.4.1 Mechanical tests . 179
169 17.4.2 Electrical tests . 180
170 17.5 Terminals and connections for external wiring . 182
171 17.5.1 Conductors . 182
172 17.5.2 Mechanical tests . 182
173 17.5.3 Electrical tests . 183
174 Annex A (normative) Test to establish whether a conductive part can cause an electric
175 shock . 185
176 Annex B (normative) Test lamps . 186
177 B.1 General . 1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.