SIST EN ISO 8340:2005

Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005)

ISO 8340:2005 specifies a method for the determination of the tensile properties at maintained extension of sealants used in joints in building construction.

Hochbau - Fugendichtstoffe - Bestimmung des Zugverhaltens unter Vorspannung (ISO 8340:2005)

Diese Internationale Norm legt ein Verfahren zur Bestimmung des Zugverhaltens von Dichtstoffen unter Vorspannung fest, die zur Abdichtung von Fugen im Hochbau verwendet werden.
ANMERKUNG   Ein Verfahren zur Bestimmung des Zugverhaltens (Dehnung bis zum Bruch) ist in ISO 8339 festgelegt.

Construction immobiliere - Mastics - Détermination des propriétés de déformation sous traction maintenue (ISO 8340:2005)

L'ISO 8340:2005 spécifie une méthode de détermination des propriétés de déformation sous traction maintenue des mastics utilisés pour les joints dans la construction immobilière.

Gradnja objektov – Lepila - Tesnilne mase - Ugotavljanje nateznih lastnosti pri vzdrževanem raztezku (ISO 8340:2005)

General Information

• Status: Published
• Publication Date: 31-Aug-2005
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: ISS SPL.GPO - Building construction
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2005
• Due Date: 01-Sep-2005
• Completion Date: 01-Sep-2005
• Ref Project: EN ISO 8340:2005 - Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8340:2005
01-september-2005
1DGRPHãþD
SIST EN 28340:1996
Gradnja objektov – Lepila - Tesnilne mase - Ugotavljanje nateznih lastnosti pri
vzdrževanem raztezku (ISO 8340:2005)
Building construction - Sealants - Determination of tensile properties at maintained
extension (ISO 8340:2005)
Hochbau - Fugendichtstoffe - Bestimmung des Zugverhaltens unter Vorspannung (ISO
8340:2005)
Construction immobiliere - Mastics - Détermination des propriétés de déformation sous
traction maintenue (ISO 8340:2005)
Ta slovenski standard je istoveten z: EN ISO 8340:2005
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN ISO 8340:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8340:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 8340:2005



EUROPEAN STANDARD
EN ISO 8340

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2005
ICS 91.100.50 Supersedes EN 28340:1990
English version
Building construction - Sealants - Determination of tensile
properties at maintained extension (ISO 8340:2005)
Construction immobilière - Mastics - Détermination des Hochbau - Fugendichtstoffe - Bestimmung des
propriétés de déformation sous traction maintenue (ISO Zugverhaltens unter Vorspannung (ISO 8340:2005)
8340:2005)
This European Standard was approved by CEN on 25 May 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8340:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8340:2005

EN ISO 8340:2005 (E)





Foreword


This document (EN ISO 8340:2005) has been prepared by Technical Committee ISO/TC 59
"Building construction" in collaboration with CMC.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by December 2005, and conflicting national
standards shall be withdrawn at the latest by December 2005.

This document supersedes EN 28340:1990.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Endorsement notice

The text of ISO 8340:2005 has been approved by CEN as EN ISO 8340:2005 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 8340:2005


INTERNATIONAL ISO
STANDARD 8340
Second edition
2005-06-15


Building construction — Sealants —
Determination of tensile properties at
maintained extension
Construction immobilière — Mastics — Détermination des propriétés de
déformation sous traction maintenue




Reference number
ISO 8340:2005(E)
©
ISO 2005

---------------------- Page: 5 ----------------------

SIST EN ISO 8340:2005
ISO 8340:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2005 – All rights reserved

---------------------- Page: 6 ----------------------

SIST EN ISO 8340:2005
ISO 8340:2005(E)
Contents Page
Foreword. iv
1 Scope . 1
2 Normative references . 1
3 Definitions . 1
4 Principle. 1
5 Apparatus . 1
6 Preparation of test specimens . 2
7 Conditioning of test specimens . 2
8 Test procedure . 3
9 Test report . 3

© ISO 2005 – All rights reserved iii

---------------------- Page: 7 ----------------------

SIST EN ISO 8340:2005
ISO 8340:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements o
...