oSIST prEN 50288-10-1:2007

Multi-element metallic cables used in analogue and digital communication and control - Part 10-1: Sectional specification for cables characterized up to 500 MHz - Horizontal and building backbone cables

Document urgently required to support the deployment of the 10G Base T structure cabling systems in Europe

Mehradrige metallische Daten- und Kontrollkabel für analoge und digitale Übertragung - Teil 10-1: Rahmenspezifikation für Kabel bis 500 MHz - Horizontal- und Steigbereich

Câbles métalliques à éléments multiples utilisés pour les transmissions et les commandes analogiques et numériques - Partie 10-1: Spécification intermédiaire pour les câbles caractérisés jusqu'à 500 MHz - Câbles horizontaux et câbles verticaux de bâtiments

Večelementni kovinski kabli za analogne in digitalne komunikacije in krmiljenje - 10-1. del: Področna specifikacija za kable z zmogljivostmi do 500 MHz – Hrbtenični kabli za vodoravno montažo in montažo v zgradbah

General Information

• Status: Not Published
• ICS: 33.120.20 - Wires and symmetrical cables
• Technical Committee: iTEL - Communication cables
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 26-Jan-2010
• Due Date: 31-Jan-2010
• Completion Date: 26-Jan-2010
• Ref Project: prEN 50288-10-1 - Multi-element metallic cables used in analogue and digital communication and control - Part 10-1: Sectional specification for cables characterized up to 500 MHz - Horizontal and building backbone cables

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 50288-10-1:2007
01-oktober-2007
9HþHOHPHQWQLNRYLQVNLNDEOL]DDQDORJQHLQGLJLWDOQHNRPXQLNDFLMHLQNUPLOMHQMH
GHO3RGURþQDVSHFLILNDFLMD]DNDEOH]]PRJOMLYRVWPLGR0+]±+UEWHQLþQL
NDEOL]DYRGRUDYQRPRQWDåRLQPRQWDåRY]JUDGEDK
Multi-element metallic cables used in analogue and digital communication and control -
Part 10-1: Sectional specification for cables characterized up to 500 MHz - Horizontal
and building backbone cables
Mehradrige metallische Daten- und Kontrollkabel für analoge und digitale Übertragung -
Teil 10-1: Rahmenspezifikation für Kabel bis 500 MHz - Horizontal- und Steigbereich
Câbles métalliques à éléments multiples utilisés pour les transmissions et les
commandes analogiques et numériques - Partie 10-1: Spécification intermédiaire pour
les câbles caractérisés jusqu'à 500 MHz - Câbles horizontaux et câbles verticaux de
bâtiments
Ta slovenski standard je istoveten z: prEN 50288-10-1:2007
ICS:
33.120.20 äLFHLQVLPHWULþQLNDEOL Wires and symmetrical
cables
oSIST prEN 50288-10-1:2007 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 50288-10-1:2007

---------------------- Page: 2 ----------------------
oSIST prEN 50288-10-1:2007

DRAFT
EUROPEAN STANDARD
prEN 50288-10-1

NORME EUROPÉENNE
March 2007
EUROPÄISCHE NORM

ICS


English version


Multi-element metallic cables used in analogue
and digital communication and control -
Part 10-1: Sectional specification for cables characterized
up to 500 MHz - Horizontal and building backbone cables


Câbles métalliques à éléments multiples Mehradrige metallische Daten- und
utilisés pour les transmissions et les Kontrollkabel für analoge
commandes analogiques et numériques - und digitale Übertragung -
Partie 10-1: Spécification intermédiaire Teil 10-1: Rahmenspezifikation
pour les câbles caractérisés jusqu'à 500 für Kabel bis 500 MHz -
MHz - Câbles horizontaux et câbles Horizontal- und Steigbereich
verticaux de bâtiments




This draft European Standard is submitted to CENELEC members for CENELEC enquiry.
Deadline for CENELEC: 2007-09-07.

It has been drawn up by CLC/SC 46XC.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national
standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to
change without notice and shall not be referred to as a European Standard.


CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Project: 20641 Ref. No. prEN 50288-10-1:2007 E

Draft for Enquiry

---------------------- Page: 3 ----------------------
oSIST prEN 50288-10-1:2007
prEN 50288-10-1:2007 - 2 -
Foreword
This draft European Standard was prepared by WG 2 of SC 46XC, Multicore, multipair and quad data
communication cables, of Technical Committee CENELEC TC 46X, Communication cables. It is
submitted to the CENELEC enquiry.
This Part 10-1 is to be read in conjunction with EN 50288-1:2003.

Draft for Enquiry

---------------------- Page: 4 ----------------------
oSIST prEN 50288-10-1:2007
- 3 - prEN 50288-10-1:2007
Contents

1 Scope. 4
2 Normative references . 4
3 Definitions, symbols and abbreviations . 4
4 Cable construction . 4
4.1 Conductor . 4
4.2 Insulation .4
4.3 Cabling elements. 4
4.4 Identification of cabling elements . 4
4.5 Screening of cabling elements . 4
4.6 Cable make-up. 5
4.7 Filling compound . 5
4.8 Interstitial fillers. 5
4.9 Screening of the cable core . 5
4.10 Moisture barriers . 5
4.11 Wrapping layers . 5
4.12 Sheath .5
5 Test methods and requirements for completed cables. 5
5.1 Electrical tests. 5
5.2 Mechanical tests. 8
5.3 Environmental tests . 9
5.4 Fire performance test methods . 9
Annex A (informative) Proposed table for data cable current, voltage and power ratings . 10
Table 1 - Low-frequency and d.c. electrical measurements. 5
Table 2 - High-frequency electrical and transmission measurements . 6
Table A.1 - ffs. 10
Draft for Enquiry

---------------------- Page: 5 ----------------------
oSIST prEN 50288-10-1:2007
prEN 50288-10-1:2007 - 4 -

1 Scope
This sectional specification relates to EN 50288-1, Multi-element metallic cables used in analogue
and digital communication and control.
It covers cables, characterised up to 500 MHz, to be used in horizontal floor and building backbone
wiring for Information technology, Generic-cabling systems.
The electrical, mechanical, transmission and environmental performance characteristics of the
cables, related to their reference test methods, are detailed.
This sectional specification is to be read in conjunction with EN 50288-1, which contains the
essential provisions for its application.
2 Normative references
The following referenced documents are indispensable for the application of this document. For
dated references, only the edition cited applies. For undated references, the latest edition of the
referenced document (including any amendments) applies.
EN 50289 Series Communication cables - Specifications for test methods
EN 50290 Series Communication cables
3 Definitions, symbols and abbreviations
For the purposes of this standard the definitions given in Clause 3 of EN 50288-1 apply.
Ex – Exogenous (derived or originating externally)
4 Cable construction
4.1 Conductor
The conductor shall be solid copper and meet the requirements of 4.1 of EN 50288-1. The conductor
shall be plain or metal coated.
The nominal conductor diameter shall be ≥ 0,52 mm and ≤ 0,80 mm.
4.2 Insulation
The insulation shall be of a suitable material according to the appropriate part or EN 50290-2-23.
4.3 Cabling elements
The cable element shall be a pair or quad.
4.4 Identification of cabling elements
Unless otherwise specified, the col
...