SIST EN IEC 60851-3:2023
(Main)Winding wires - Test methods - Part 3: Mechanical properties (IEC 60851-3:2023)
Winding wires - Test methods - Part 3: Mechanical properties (IEC 60851-3:2023)
This part of IEC 60851 specifies the following test methods for winding wires:
– Test 6: Elongation;
– Test 7: Springiness;
– Test 8: Flexibility and adherence;
– Test 11: Resistance to abrasion;
– Test 18: Heat bonding.
For definitions, general notes on test methods and the complete series of test methods for
winding wires, IEC 60851-1 applies. This document also provides recommended friction test
methods in Annex B.
Wickeldrähte - Prüfverfahren - Teil 3: Mechanische Eigenschaften (IEC 60851-3:2023)
Fils de bobinage - Méthodes d'essai - Partie 3: Propriétés mécaniques (IEC 60851-3:2023)
IEC 60851-3:2023 est disponible sous forme de IEC 60851-3:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
IEC 60851-3: 2023 spécifie les méthodes d’essai suivantes pour les fils de bobinage:
- Essai 6: Allongement;
- Essai 7: Effet de ressort;
- Essai 8: Souplesse et adhérence;
- Essai 11: Résistance à l’abrasion;.
- Essai 18: Thermoadhérence.
Pour les définitions, les généralités concernant les méthodes d’essai et les séries complètes des méthodes d’essai des fils de bobinage, c’est l’IEC 60851-1 qui s’applique. Le présent document donne aussi les méthodes d’essai de frottement recommandées dans l'Annexe B. Cette quatrième édition annule et remplace la troisième édition parue en 2009, l’Amendement 1 paru en 2013 et l’Amendement 2 paru en 2019. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
a) clarification de la mesure de distance visant à déterminer la perte d’adhérence en 6.6.3, en 6.6.4 pour les fils recouverts d’une enveloppe fibreuse et en 6.6.5 pour les fils rubanés.
Navijalne žice - Preskusne metode - 3. del: Mehanske lastnosti (IEC 60851-3:2023)
Ta del standarda IEC 60851 določa naslednje preskusne metode za navijalne žice:
– preskus 6: raztezek;
– preskus 7: elastičnost;
– preskus 8: prožnost in oprijemljivost;
– preskus 11: odpornost proti obrabi;
– preskus 18: toplotno spajanje.
Za opredelitve, splošne opombe glede preskusnih metod in celoten nabor preskusnih metod za navijalne žice se uporablja standard IEC 60851-1. Ta dokument določa tudi priporočene preskusne metode za trenje v dodatku B.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60851-3:2023
01-november-2023
Navijalne žice - Preskusne metode - 3. del: Mehanske lastnosti (IEC 60851-3:2023)
Winding wires - Test methods - Part 3: Mechanical properties (IEC 60851-3:2023)
Wickeldrähte - Prüfverfahren - Teil 3: Mechanische Eigenschaften (IEC 60851-3:2023)
Fils de bobinage - Méthodes d'essai - Partie 3: Propriétés mécaniques (IEC 60851-
3:2023)
Ta slovenski standard je istoveten z: EN IEC 60851-3:2023
ICS:
29.060.10 Žice Wires
SIST EN IEC 60851-3:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60851-3:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 60851-3:2023
EUROPEAN STANDARD EN IEC 60851-3
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2023
ICS 29.060.10 Supersedes EN 60851-3:2009;
EN 60851-3:2009/A1:2013; EN 60851-3:2009/A2:2019
English Version
Winding wires - Test methods - Part 3: Mechanical properties
(IEC 60851-3:2023)
Fils de bobinage - Méthodes d'essai - Partie 3: Propriétés Wickeldrähte - Prüfverfahren - Teil 3: Mechanische
mécaniques Eigenschaften
(IEC 60851-3:2023) (IEC 60851-3:2023)
This European Standard was approved by CENELEC on 2023-09-26. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60851-3:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60851-3:2023
EN IEC 60851-3:2023 (E)
European foreword
The text of document 55/1938/CDV, future edition 4 of IEC 60851-3, prepared by IEC/TC 55 "Winding
wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 60851-3:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-06-26
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-09-26
document have to be withdrawn
This document supersedes EN 60851-3:2009 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60851-3:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60264 (series) NOTE Approved as EN 60264 (series)
IEC 60317 (series) NOTE Approved as EN 60317 (series)
IEC 60851-1 NOTE Approved as EN IEC 60851-1
IEC 60851-5:2008 NOTE Approved as EN 60851-5:2008 (not modified)
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60851-3:2023
EN IEC 60851-3:2023 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been mod
...
SLOVENSKI STANDARD
oSIST prEN IEC 60851-3:2023
01-marec-2023
Navijalne žice - Preskusne metode - 3. del: Mehanske lastnosti
Winding wires - Test methods - Part 3: Mechanical properties
Wickeldrähte - Prüfverfahren - Teil 3: Mechanische Eigenschaften
Fils de bobinage - Méthodes d'essai - Partie 3: Propriétés mécaniques
Ta slovenski standard je istoveten z: prEN IEC 60851-3:2023
ICS:
29.060.10 Žice Wires
oSIST prEN IEC 60851-3:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 60851-3:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60851-3:2023
55/1938/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60851-3 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-01-20 2023-04-14
SUPERSEDES DOCUMENTS:
55/1923/CD, 55/1932A/CC
IEC TC 55 : WINDING WIRES
SECRETARIAT: SECRETARY:
United States of America Mr Mike Leibowitz
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 2,TC 14
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of
• any relevant patent rights of which they are aware and to provide supporting documentation,
• any relevant “in some countries” clauses to be included should this proposal proceed. Recipients are
reminded that the enquiry stage is the final stage for submitting "in some countries" clauses. See
AC/22/2007.
TITLE:
Winding wires - Test methods - Part 3: Mechanical properties
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it,
for any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60851-3:2023
IEC CDV 60851-3/Ed4 © IEC 2023 – 2 – 55/1938/CDV
1 CONTENTS
2
3 FOREWORD . 5
4 INTRODUCTION . 7
5 1 Scope . 8
6 2 Normative references . 8
7 3 Test 6: Elongation . 8
8 3.1 Elongation at fracture . 8
9 3.2 Tensile strength . 8
10 4 Test 7: Springiness . 9
11 4.1 Round wire with a nominal conductor diameter from 0,080 mm up to and
12 including 1,600 mm . 9
13 4.1.1 Principle . 9
14 4.1.2 Equipment . 9
15 4.1.3 Procedure . 10
16 4.2 Round wire with a nominal conductor diameter over 1,600 mm and
17 rectangular wire . 11
18 4.2.1 Principle . 11
19 4.2.2 Equipment . 11
20 4.2.3 Specimen .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.