SIST EN IEC 60851-1:2021/A1:2025
(Amendment)Winding wires - Test methods - Part 1: General (IEC 60851-1:2021/AMD1:2025)
Winding wires - Test methods - Part 1: General (IEC 60851-1:2021/AMD1:2025)
Wickeldrähte - Prüfverfahren - Teil 1: Allgemeines (IEC 60851-1:2021/AMD1:2025)
Fils de bobinage - Méthodes d'essai - Partie 1: Généralités (IEC 60851-1:2021/AMD1:2025)
Navijalne žice - Preskusne metode - 1. del: Splošno - Dopolnilo A1 (IEC 60851-1:2021/AMD1:2025)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2025
Navijalne žice - Preskusne metode - 1. del: Splošno - Dopolnilo A1 (IEC 60851-
1:2021/AMD1:2025)
Winding wires - Test methods - Part 1: General (IEC 60851-1:2021/AMD1:2025)
Wickeldrähte - Prüfverfahren - Teil 1: Allgemeines (IEC 60851-1:2021/AMD1:2025)
Fils de bobinage - Méthodes d'essai - Partie 1: Généralités (IEC 60851-
1:2021/AMD1:2025)
Ta slovenski standard je istoveten z: EN IEC 60851-1:2021/A1:2025
ICS:
29.060.10 Žice Wires
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60851-1:2021/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2025
ICS 29.060.10
English Version
Winding wires - Test methods - Part 1: General
(IEC 60851-1:2021/AMD1:2025)
Fils de bobinage - Méthodes d'essai - Partie 1 : Généralités Wickeldrähte - Prüfverfahren - Teil 1: Allgemeines
(IEC 60851-1:2021/AMD1:2025) (IEC 60851-1:2021/AMD1:2025)
This amendment A1 modifies the European Standard EN IEC 60851-1:2021; it was approved by CENELEC on 2025-02-10. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60851-1:2021/A1:2025 E
European foreword
The text of document 55/2057/FDIS, future edition 3 of IEC 60851-1/AMD1, prepared by TC 55
"Winding wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2026-02-28
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2028-02-29
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60851-1:2021/AMD1:2025 was approved by CENELEC as
a European Standard without any modification.
IEC 60851-1 ®
Edition 3.0 2025-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Winding wires – Test methods –
Part 1: General
Fils de bobinage – Méthodes d'essai –
Partie 1 : Généralités
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10 ISBN 978-2-8327-0123-2
– 2 – IEC 60851-1:2021/AMD1:2025
© IEC 2025
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
WINDING WIRES – TEST METHODS –
Part 1: General
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National C
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.