SIST EN 13894-1:2004
(Main)Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 1: During cure
Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 1: During cure
This Part of this European Standard specifies laboratory method of testing to ascertain how dynamic loading affects strength development of structural bonding agents during curing.
Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der Dauerschwingfestigkeit unter dynamischer Belastung - Teil 1: Während des Aushärten
Diese Europäische Norm legt ein Laborprüfverfahren zur Untersuchung fest, wie eine dynamische Belastung während des Aushärtens die Ausbildung der Festigkeit von Klebstoffen für konstruktive Zwecke beeinflusst.
Produits et systemes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination de la fatigue sous charge dynamique - Partie 1: Pendant le durcissement
La présente partie de cette Norme européenne prescrit une méthode d'essai de laboratoire permettant de vérifier comment une charge dynamique affecte le développement de la résistance des produits de collage structural pendant le durcissement.
Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij – Preskusne metode - Določevanje utrujanja pri dinamični obtežbi – 1. del: Trajna nega
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der Dauerschwingfestigkeit unter dynamischer Belastung - Teil 1: Während des AushärtenProduits et systemes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination de la fatigue sous charge dynamique - Partie 1: Pendant le durcissementProducts and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 1: During cure91.080.40Betonske konstrukcijeConcrete structuresICS:Ta slovenski standard je istoveten z:EN 13894-1:2003SIST EN 13894-1:2004en01-april-2004SIST EN 13894-1:2004SLOVENSKI
STANDARD
SIST EN 13894-1:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13894-1October 2003ICS 91.080.40English versionProducts and systems for the protection and repair of concretestructures - Test methods - Determination of fatigue underdynamic loading - Part 1: During cureProduits et systèmes de protection et de réparation desstructures en béton - Méthodes d'essai - Détermination dela fatigue sous charge dynamique - Partie 1: Pendant ledurcissementProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Prüfverfahren -Bestimmung der Dauerschwingfestigkeit unter dynamischerBelastung - Teil 1: Während des AushärtenThis European Standard was approved by CEN on 10 July 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13894-1:2003 ESIST EN 13894-1:2004
EN 13894-1:2003 (E)2ContentspageForeword.31.41Scope.42Normative references.43Principle.44Equipment.45Procedure.45.1Preparation of test pieces.45.2Number of test specimens.45.3Testing.55.4Failure mode.55.5Failure strength ratio.56Test report.6SIST EN 13894-1:2004
EN 13894-1:2003 (E)3ForewordThis document (EN 13894-1:2003) has been prepared by Technical Committee CEN/TC 104 “Concrete andrelated products”, the secretariat of which is held by DIN.It has been prepared by Sub-Committee 8 “Products and systems for the protection and repair of concretestructures” (Secretariat, AFNOR).This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by May 2004, and conflicting national standards shall be withdrawn at thelatest by May 2004.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 13894-1:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.