SIST EN 13894-2:2003
(Main)Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 2: After hardening
Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 2: After hardening
The purpose of this standard is to define a laboratory method of testing to ascertain the fatigue of structural bonding agents in composite systems involving the bonding of steel-to-steel, steel-to-concrete and hardened concrete-to-hardened concrete.
Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung des Ermüdungsverhaltens bei dynamischer Belastung - Teil 2: Nach dem Erhärten
Zweck dieser Norm ist die Festlegung eines Laborprüfverfahrens, mit dem sich in Verbundsystemen, bei denen die Verklebung von Stahl auf Stahl, Stahl auf Beton und Beton auf Beton vorkommt, beim Aushärten von Klebstoffen für konstruktive Zwecke die Reaktion auf Dauerschwingfestigkeit unter dynamischer Belastung bestimmen lässt.
Produits et systemes pour la protection et la réparation des structures en béton - Méthodes d'essai - Détermination de la fatigue sous charge dynamique - Partie 2: Apres durcissement
La présente partie de cette Norme européenne décrit une méthode permettant de déterminer la réponse a la fatigue sous charge dynamique des agents de collage structural apres durcissement.
Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij - Preskusne metode - Določevanje utrujanja pri dinamični obtežbi - 2. del: Po strjevanju
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung des Ermüdungsverhaltens bei dynamischer Belastung - Teil 2: Nach dem ErhärtenProduits et systemes pour la protection et la réparation des structures en béton - Méthodes d'essai - Détermination de la fatigue sous charge dynamique - Partie 2: Apres durcissementProducts and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 2: After hardening91.080.40Betonske konstrukcijeConcrete structuresICS:Ta slovenski standard je istoveten z:EN 13894-2:2002SIST EN 13894-2:2003en01-marec-2003SIST EN 13894-2:2003SLOVENSKI
STANDARD
SIST EN 13894-2:2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13894-2October 2002ICS 91.080.40English versionProducts and systems for the protection and repair of concretestructures - Test methods - Determination of fatigue underdynamic loading - Part 2: After hardeningProduits et systèmes pour la protection et la réparation desstructures en béton - Méthodes d'essais - Détermination dela fatigue sous charge dynamique - Partie 2: AprèsdurcissementProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Prüfverfahren -Bestimmung des Ermüdungsverhaltens bei dynamischerBelastung - Teil 2: Nach dem ErhärtenThis European Standard was approved by CEN on 11 July 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13894-2:2002 ESIST EN 13894-2:2003
EN 13894-2:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Principle.44Equipment.45Test procedure.46Test report.5SIST EN 13894-2:2003
EN 13894-2:2002 (E)3ForewordThis document (EN 13894-2:2002) has been prepared by Technical Committee CEN /TC 104 "Concrete andrelated products", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2003, and conflicting national standards shall be withdrawn at the latest byApril 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard : Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 13894-2:2003
EN 13894-2:2002 (E)41 ScopeThis part of this European Standard describes a method for determining the response to fatigue under dynamicloading of structural bonding agents after hardening.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.