oSIST prEN IEC 61300-2-34:2022
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids
D133/C027: DOW = DOR + 12 months
Lichtwellenleiter – Verbindungselemente und passive Bauteile – Grundlegende Prüf- und Messverfahren – Teil 2-34: Tests – Beständigkeit gegen Lösungsmittel und verschmutzende Flüssigkeiten
Dispositifs d’interconnexion et composants passifs fibroniques - Procédures fondamentales d’essais et de mesures - Partie 2-34: Essais - Résistance aux solvants et aux fluides contaminants
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-34. del: Preskusi - Odpornost proti topilom in onesnaženim tekočinam
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61300-2-34:2022
01-november-2022
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 2-34. del: Preskusi - Odpornost proti topilom in onesnaženim tekočinam
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating
fluids
Dispositifs d’interconnexion et composants passifs fibroniques - Procédures
fondamentales d’essais et de mesures - Partie 2-34: Essais - Résistance aux solvants et
aux fluides contaminants
Ta slovenski standard je istoveten z: prEN IEC 61300-2-34:2022
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 61300-2-34:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61300-2-34:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61300-2-34:2022
86B/4639/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61300-2-34 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-09-02 2022-11-25
SUPERSEDES DOCUMENTS:
86B/4502/CD, 86B/4538A/CC
IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Shigeru Tomita
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Fibre optic interconnecting devices and passive components - Basic test and measurement
procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids
PROPOSED STABILITY DATE: 2032
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61300-2-34:2022
IEC CDV 61300-2-34/Ed3 IEC:2022 – 2 – 86B/4639/CDV
1 CONTENTS
2 FOREWORD . 3
3 1 Scope . 5
4 2 Normative references . 5
5 3 Terms and definitions. 5
6 4 General description . 5
7 5 Apparatus . 6
8 5.1 Containers . 6
9 5.2 Fluids . 6
10 5.3 Heat source . 6
11 5.4 Temperature controlled equipment . 6
12 6 Procedure . 6
13 6.1 DUT preparation . 6
14 6.2 Preconditioning . 6
15 6.3 Initial examinations and measurements . 6
16 6.4 Conditioning . 6
17 6.5 Recovery . 7
18 6.6 Final examinations and measurements . 7
19 7 Severity . 7
20 7.1 General . 7
21 7.2 Exposure and drying duration . 8
22 7.3 Test fluids . 8
23 8 Details to be specified and reported . 9
24 Bibliography . 10
25
26 Table 1 – Preferred test durations . 8
27 Table 2 – Recommended test temperatures . 8
28 Table 3 – Preferred drying durations . 8
29 Table 4 – General use fluids . 8
30 Table 5 – ISO 1817 test fluids . 9
31
32
33
---------------------- Page: 4 ----------------------
oSIST prEN IEC 61300-2-34:2022
IEC CDV 61300-2-34/Ed3 IEC:2022 – 3 – 86B/4639/CDV
34 INTERNATIONAL ELECTROTECHNICAL COMMISSION
35 ____________
36
37 FIBRE OPTIC INTERCONNECTING
38 DEVICES AND PASSIVE COMPONENTS –
39 BASIC TEST AND MEASUREMENT PROCEDURES –
40
41 Part 2-34: Tests –
42 Resistance to solvents and contaminating fluids
43
44
45 FOREWORD
46 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
47 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
48 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
49 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
50 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
51 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
52 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
53 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
54 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
55 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
56 consensus of opinion on the relevant subjects since each technical committee has representation from all
57 interested IEC National Committees.
58 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
59 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
60 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
61 misinterpretation by any end user.
62 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
63 transparently to the maximum extent possible in their national and regional publications. Any divergence between
64 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
65 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
66 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
67 services carried out by independent certification bodies.
68 6) All users should ensure that they have the latest edition of this publication.
69 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
70 members of its technical committees and IEC National Committees for any personal injury, property damage or
71 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
72 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
73 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
74 indispensable for the correct application of this publication.
75 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
76 rights. IEC shall not be held responsible for identifying any or all such patent rights.
77 International Standard IEC 61300-2-34 has been prepared by subcommittee 86B: Fibre optic
78 interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
79 This third edition cancels and replaces the second edition published in 2009. It constitutes a
80 general revision. The main changes from the previous edition are as follows:
81 a) revision of title
82 b) general revision of document content
83 c) classification of applicable fluids, bringing document in line with IEC61753-1;
84 d) severities of test.
85 The text of this standard is based on the following documents:
FDIS Report on voting
86B/XXXX/FDIS 86B/XXXX/RVD
---------------------- Page: 5 ----------------------
oSIST prEN IEC 61300-2-34:2022
IEC CDV 61300-2-34/Ed3 IEC:2022 – 4 – 86B/4639/CDV
86
87 Full information on the voting for the approval of this standard can be found in the report on
88 voting indicated in the above table.
89 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
90 The French version of this standard has not been voted upon.
91 A list of all the parts in the IEC 61300 series, under the general title Fibre optic interconnecting
92 devices and passive components – Basic test and measurement procedures, can be found on
93 the IEC website.
94 The committee has decided that the contents of this publication will remain unchanged until the
95 stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to
96 the specific publication. At this date, the publication will be
97 • reconfirmed,
98 • withdrawn,
99 • replaced by a revised edition, or
100 • amended.
101
102
---------------------- Page: 6 ----------------------
oSIST prEN IEC 61300-2-34:2022
IEC CDV 61300-2-34/Ed3 IEC:2022 – 5 – 86B/4639/CDV
103 FIBRE OPTIC INTERCONNECTING
104 DEVICES AND PASSIVE COMPONENTS –
105 BASIC TEST AND MEASUREMENT PROCEDURES –
106
107 Part 2-34: Tests –
108 Resistance to solvents and contaminating fluids
109 1 Scope
110 The purpose of this part of IEC 61300 is for testing the resistance to solvents and contaminating
111 fluids on fibre optic interconnecting devices, passive components and protective housings and
112 its functionality.
113 2 Normative references
114 The following refe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.