SIST EN 55016-1-4:2005/A2:2006
(Amendment)Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-4: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Radiated disturbances
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-4: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Radiated disturbances
Superseded by EN 55016-1-4:2007
Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit -- Teil 1-4: Geräte und Einrichtungen zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Zusatz-/Hilfseinrichtungen - Gestrahlte Störaussendung
Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques -- Partie 1-4: Appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Matériels auxiliaires - Perturbations rayonnées
Specifikacija za merilne naprave in metode za merjenje radiofrekvenčnih motenj in odpornosti – 1-4. del: Merilne naprave za merjenje radiofrekvenčnih motenj in odpornosti – Pomožna oprema – Sevane motnje – Upoštevanje antenskega droga in vrtljive mize (CISPR 16-1-4:2003/A2:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 55016-1-
4:2005/A2:2006
STANDARD
september 2006
Specifikacija za merilne naprave in metode za merjenje radiofrekvenčnih
motenj in odpornosti – 1-4. del: Merilne naprave za merjenje radiofrekvenčnih
motenj in odpornosti – Pomožna oprema – Sevane motnje – Upoštevanje
antenskega droga in vrtljive mize (CISPR 16-1-4:2003/A2:2005)
Specification for radio disturbance and immunity measuring apparatus and
methods - Part 1-4: Radio disturbance and immunity measuring apparatus -
Ancillary equipment - Radiated disturbances - Antenna mast and turntable
considerations (CISPR 16-1-4:2003/A2:2005)
ICS 17.240; 33.100.20 Referenčna številka
SIST EN 55016-1-4:2005/A2:2006(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 55016-1-4/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2005
ICS 33.100.10
English version
Specification for radio disturbance and immunity
measuring apparatus and methods
Part 1-4: Radio disturbance and immunity measuring apparatus –
Ancillary equipment –
Radiated disturbances
(CISPR 16-1-4:2003/A2:2005)
Spécifications des méthodes et des appareils Anforderungen an Geräte und Einrichtungen
de mesure des perturbations radioélectriques sowie Festlegung der Verfahren zur Messung
et de l'immunité der hochfrequenten Störaussendung
aux perturbations radioélectriques (Funkstörungen) und Störfestigkeit
Partie 1-4: Appareils de mesure Teil 1-4: Geräte und Einrichtungen
des perturbations radioélectriques zur Messung der hochfrequenten
et de l'immunité aux perturbations Störaussendung (Funkstörungen)
radioélectriques – und Störfestigkeit –
Matériels auxiliaires – Zusatz-/Hilfseinrichtungen –
Perturbations rayonnées Gestrahlte Störaussendung
(CISPR 16-1-4:2003/A2:2005) (CISPR 16-1-4:2003/A2:2005)
This amendment A2 modifies the European Standard EN 55016-1-4:2004; it was approved by CENELEC
on 2005-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 55016-1-4:2004/A2:2005 E
---------------------- Page: 2 ----------------------
EN 55016-1-4:2004/A2:2005 - 2 -
Foreword
The text of document CISPR/A/614/FDIS, future amendment 2 to CISPR 16-1-4:2003, prepared by
CISPR SC A, Radio-interference measurements and statistical methods, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as amendment A2 to
EN 55016-1-4:2004 on 2005-12-01.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2006-09-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2008-12-01
__________
Endorsement notice
The text of amendment 2:2005 to the International Standard CISPR 16-1-4:2003 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
---------------------- Page: 3 ----------------------
INTERNATIONAL
CISPR
ELECTROTECHNICAL
16-1-4
COMMISSION
2003
AMENDMENT 2
2005-11
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
Amendment 2
Specification for radio disturbance and immunity
measuring apparatus and methods –
Part 1-4:
Radio disturbance and immunity measuring
apparatus – Ancillary equipment –
Radiated disturbances
This English-language version is derived from the original
bilingual publication by leaving out all French-language
pages. Missing page numbers correspond to the French-
language pages.
IEC 2005 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
F
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
---------------------- Page: 4 ----------------------
CISPR 16-1-4 Amend. 2 IEC:2005 – 3 –
FOREWORD
This amendment has been prepared by CISPR subcommittee A: Radio interference
measurements and statistical methods.
The text of this amendment is based on the following documents:
FDIS Report on voting
CISPR/A/614/FDIS CISPR/A/633/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
Page 3
CONTENTS
Add, after the Annexes, the title of the Bibliography as follows:
Bibliography
Page 57
Add, after the existing subclause 5.8, the following new subclause 5.9:
5.9 Evaluation of set-up table and antenna tower
5.9.1 Introduction
A set-up table as specified in Clause D.5 typically positions the EUT for field strength
measurements. The shape, construction and material permittivity of the set-up table can
influence the field strength measurement results (see Bibliography). The following subclause
(5.9.2) describes a procedure to determine the influence of the set-up table for the 30 MHz to
1 000 MHz frequency range and to estimate its related uncertainty contribution to field
strength measurements.
NOTE Only horizontal polarisation of a transmit antenna above the setup table is used in the evaluation. This
polarisation accounts for the worst-case effects from the table.
The antenna tower does not require additional evaluation because any perturbation effects
will be included in the NSA measurement.
---------------------- Page: 5 ----------------------
CISPR 16-1-4 Amend. 2 IEC:2005 – 5 –
5.9.2 Evaluation procedure for set-up table influences (table-top equipment)
The type, shape, and component materials of a set-up table may affect the field strength
measurement results. An evaluation procedure shall be performed to determine these effects, and to
estimate the standard uncertainties caused by the table. To evaluate set-up table influences, two
transmission measurements are perfor
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.