SIST EN IEC 55016-1-4:2019
(Amendment)Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements
This part of CISPR 16 specifies the characteristics and performance of equipment for the
measurement of radiated disturbances in the frequency range 9 kHz to 18 GHz. Specifications
for antennas and test sites are included.
NOTE In accordance with IEC Guide 107, CISPR 16-1-4 is a basic EMC publication for use by product committees
of the IEC. As stated in Guide 107, product committees are responsible for determining the applicability of the EMC
standard. CISPR and its sub-committees are prepared to cooperate with product committees in the evaluation of
the value of particular EMC tests for specific products.
The requirements of this publication apply at all frequencies and for all levels of radiated
disturbances within the CISPR indicating range of the measuring equipment.
Methods of measurement are covered in Part 2-3, further information on radio disturbance is
given in Part 3, and uncertainties, statistics and limit modelling are covered in Part 4 of
CISPR 16.
Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit – Teil 1-4: Geräte und Einrichtungen zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit – Antennen und Messplätze für Messungen der gestrahlten Störaussendung
Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 1-4: Appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Antennes et emplacements d'essai pour les mesures des perturbations rayonnées
Specifikacija merilnih naprav in metod za merjenje radiofrekvenčnih motenj in odpornosti - 1-4. del: Merilne naprave za merjenje radiofrekvenčnih motenj in odpornosti - Antene in preskuševališča za meritve sevanih motenj
Ta del standarda CISPR 16 določa značilnosti in učinkovitost opreme za meritve sevanih motenj v frekvenčnem območju od 9 kHz do 18 GHz. Vključene so specifikacije za antene in preskuševališča.
OPOMBA: V skladu z vodilom IEC 107 je standard CISPR 16-1-4 osnovna objava o elektromagnetni združljivosti, ki jo uporabljajo tehnični odbori v okviru Mednarodne elektrotehniške komisije (IEC). Kot je navedeno v vodilu IEC 107, so za ugotavljanje uporabe standarda o elektromagnetni združljivosti odgovorni tehnični odbori. Odbor CISPR in njegovi pododbori so pripravljeni sodelovati s tehničnimi odbori pri vrednotenju posameznih preskusov elektromagnetne združljivosti za ustrezne izdelke.
Zahteve v tej publikaciji se uporabljajo za vse frekvence ter za vse ravni sevanih motenj v opredeljenem območju CISPR merilne opreme.
Merilne metode so zajete v delu 2–3, dodatne informacije o radijskih motnjah so navedene v 3. delu, negotovosti, statistike in modeliranje z omejitvami pa so zajete v 4. delu standarda CISPR 16.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2019
Nadomešča:
SIST EN 55016-1-4:2011
SIST EN 55016-1-4:2011/A1:2013
SIST EN 55016-1-4:2011/A2:2017
Specifikacija merilnih naprav in metod za merjenje radiofrekvenčnih motenj in
odpornosti - 1-4. del: Merilne naprave za merjenje radiofrekvenčnih motenj in
odpornosti - Antene in preskuševališča za meritve sevanih motenj
Specification for radio disturbance and immunity measuring apparatus and methods -
Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites
for radiated disturbance measurements
Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur
Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit – Teil
1-4: Geräte und Einrichtungen zur Messung der hochfrequenten Störaussendung
(Funkstörungen) und Störfestigkeit – Antennen und Messplätze für Messungen der
gestrahlten Störaussendung
Spécifications des méthodes et des appareils de mesure des perturbations
radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 1-4:
Appareils de mesure des perturbations radioélectriques et de l'immunité aux
perturbations radioélectriques - Antennes et emplacements d'essai pour les mesures
des perturbations rayonnées
Ta slovenski standard je istoveten z: EN IEC 55016-1-4:2019
ICS:
17.240 Merjenje sevanja Radiation measurements
33.100.20 Imunost Immunity
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 55016-1-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2019
ICS 33.100.10; 33.100.20 Supersedes EN 55016-1-4:2010
English Version
Specification for radio disturbance and immunity measuring
apparatus and methods - Part 1-4: Radio disturbance and
immunity measuring apparatus - Antennas and test sites for
radiated disturbance measurements
(CISPR 16-1-4:2019)
Spécifications des méthodes et des appareils de mesure Anforderungen an Geräte und Einrichtungen sowie
des perturbations radioélectriques et de l'immunité aux Festlegung der Verfahren zur Messung der hochfrequenten
perturbations radioélectriques - Partie 1-4: Appareils de Störaussendung (Funkstörungen) und Störfestigkeit - Teil 1-
mesure des perturbations radioélectriques et de l'immunité 4: Geräte und Einrichtungen zur Messung der
aux perturbations radioélectriques - Antennes et hochfrequenten Störaussendung (Funkstörungen) und
emplacements d'essai pour les mesures des perturbations Störfestigkeit - Antennen und Messplätze für Messungen
rayonnées der gestrahlten Störaussendung
(CISPR 16-1-4:2019) (CISPR 16-1-4:2019)
This European Standard was approved by CENELEC on 2019-02-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 55016-1-4:2019 E
European foreword
The text of document CIS/A/1262/FDIS, future edition 4 of CISPR 16-1-4, prepared by CISPR SC A
"Radio-interference measurements and statistical methods" of CISPR "International special committee
on radio interference" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN IEC 55016-1-4:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-11-12
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-02-12
document have to be withdrawn
This document supersedes EN 55016-1-4:2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard CISPR 16-1-4:2019 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61169-8 NOTE Harmonized as EN 61169-8
IEC 61000-4-20 NOTE Harmonized as EN 61000-4-20
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
CISPR 16-1-1 - Specification for radio disturbance and immunity - -
measuring apparatus and methods - Part 1-1:
Radio disturbance and immunity measuring
apparatus - Measuring apparatus
CISPR 16-1-5 2014 Specification for radio disturbance and immunity EN 55016-1-5 2015
measuring apparatus and methods - Part 1-5:
Radio disturbance and immunity measuring
apparatus - Antenna calibration sites and
reference test sites for 5 MHz to 18 GHz
+ A1 2016 + A1 2017
CISPR 16-1-6 2014 Specification for radio disturbance and immunity EN 55016-1-6 2015
measuring apparatus and methods - Part 1-6:
Radio disturbance and immunity measuring
apparatus - EMC antenna calibration
+ A1 2017 + A1 2017
CISPR 16-2-3 2016 Specification for radio disturbance and immunity EN 55016-2-3 2017
measuring apparatus and methods - Part 2-3:
Methods of measurement of disturbances and
immunity - Radiated disturbance measurements
CISPR TR 16-3 - Specification for radio disturbance and immunity - -
measuring apparatus and methods -- Part 3:
CISPR technical reports
CISPR 16-4-2 - Specification for radio disturbance and immunity EN 55016-4-2 -
measuring apparatus and methods - Part 4-2:
Uncertainties, statistics and limit modelling -
Measurement instrumentation uncertainty
IEC 60050-191 - International Electrotechnical Vocabulary - - -
Chapter 191: Dependability and quality of service
CISPR 16-1-4 ®
Edition 4.0 2019-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
INT ERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
C OMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES
Specification for radio disturbance and immunity measuring apparatus and
methods –
Part 1-4: Radio disturbance and immunity measuring apparatus – Antennas and
test sites for radiated disturbance measurements
Spécifications des méthodes et des appareils de mesure des perturbations
radioélectriques et de l'immunité aux perturbations radioélectriques –
Partie 1-4: Appareils de mesure des perturbations radioélectriques et de
l'immunité aux perturbations radioélectriques – Antennes et emplacements
d'essai pour les mesures des perturbations rayonnées
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.100.10; 33.100.20 ISBN 978-2-8322-6261-0
– 2 – CISPR 16-1-4:2019 IEC 2019
CONTENTS
FOREWORD . 8
1 Scope . 10
2 Normative references . 10
3 Terms, definitions and abbreviated terms . 11
3.1 Terms and definitions . 11
3.2 Abbreviated terms . 15
4 Antennas for measurement of radiated radio disturbance . 16
4.1 General . 16
4.2 Physical parameter (measurand) for radiated disturbance measurements . 16
4.3 Antennas for the frequency range 9 kHz to 150 kHz . 17
4.3.1 General . 17
4.3.2 Magnetic field antenna . 17
4.3.3 Shielding of loop antenna . 17
4.4 Antennas for the frequency range 150 kHz to 30 MHz . 17
4.4.1 Electric field antenna . 17
4.4.2 Magnetic field antenna . 18
4.4.3 Balance and electric field discrimination of antennas . 18
4.5 Antennas for the frequency range 30 MHz to 1 000 MHz . 18
4.5.1 General . 18
4.5.2 Low-uncertainty antenna for use if there is an alleged non-compliance
to the electric disturbance field strength limit . 18
4.5.3 Antenna characteristics . 18
4.5.4 Balance of antenna . 20
4.5.5 Cross-polar response of antenna . 22
4.6 Antennas for the frequency range 1 GHz to 18 GHz . 23
4.6.1 General . 23
4.6.2 Receive antenna . 23
4.7 Special antenna arrangements – large-loop antenna system . 25
5 Test sites for measurement of radio disturbance field strength for the frequency
range of 9 kHz to 30 MHz . 25
6 Test sites for measurement of radio disturbance field strength for the frequency
range of 30 MHz to 1 000 MHz . 26
6.1 General . 26
6.2 OATS . 26
6.2.1 General . 26
6.2.2 Weather-protection enclosure . 26
6.2.3 Obstruction-free area . 26
6.2.4 Radio-frequency ambient environment of a test site . 27
6.2.5 Ground plane . 28
6.3 Suitability of other test sites . 28
6.3.1 Other ground-plane test sites . 28
6.3.2 Test sites without ground plane (FAR) . 28
6.4 Test site validations . 29
6.4.1 General . 29
6.4.2 Overview of test site validations . 30
6.5 Basic parameters of the NSA method for OATS and SAC
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.