oSIST prEN IEC 61300-2-22:2023

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature

D133/C027: DOW = DOR + 12 months

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-22: Prüfungen - Temperaturwechsel

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-22: Essais - Variations de température

Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-22. del: Preskusi - Sprememba temperature

General Information

• Status: Not Published
• Public Enquiry End Date: 23-Feb-2023
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: MOC - Mobile Communications
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 14-Dec-2022
• Due Date: 03-May-2023
• Completion Date: 19-Apr-2023
• Ref Project: prEN IEC 61300-2-22:2022 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature

Relations

• Revised: SIST EN 61300-2-22:2007 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-22: Tests - Change of temperature
• Effective Date: 30-Mar-2021

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 61300-2-22:2023
01-februar-2023
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 2-22. del: Preskusi - Sprememba temperature
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-22: Tests - Change of temperature
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-22: Prüfungen - Temperaturwechsel
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 2-22: Essais - Variations de température
Ta slovenski standard je istoveten z: prEN IEC 61300-2-22:2022
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 61300-2-22:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 61300-2-22:2023

---------------------- Page: 2 ----------------------
oSIST prEN IEC 61300-2-22:2023
86B/4674/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61300-2-22 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-12-02 2023-02-24
SUPERSEDES DOCUMENTS:
86B/4545/CD, 86B/4579A/CC

IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Shigeru Tomita
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Fibre optic interconnecting devices and passive components - Basic test and measurement
procedures - Part 2-22: Tests - Change of temperature

PROPOSED STABILITY DATE: 2032

NOTE FROM TC/SC OFFICERS:



Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 61300-2-22:2023
IEC CDV 61300-2-22/Ed3  IEC:2022 – 2 – 86B/4674/CDV
1 CONTENTS
2 FOREWORD . 3
3 1 Scope . 5
4 2 Normative references . 5
5 3 Terms and definitions . 5
6 4 General description . 5
7 5 Apparatus . 6
8 5.1 Environmental test chamber . 6
9 5.2 Examination and measurement equipment . 6
10 6 Procedure . 6
11 6.1 General . 6
12 6.2 Preconditioning . 6
13 6.3 Initial examination and measurement . 6
14 6.4 Setting DUT . 6
15 6.5 Test conditions . 6
16 6.6 Recovery . 7
17 6.7 Examinations and measurements during the test and recovery . 7
18 6.8 Final examinations and measurements . 7
19 7 Severity . 7
20 8 Details to be specified and reported . 8
21 Bibliography . 10
22
23 Figure 1 – Temperature profile . 7
24
25 Table 1 – Severities (1 of 2) . 7
26 Table 1 – Severities (2 of 2) . 8
27
28

---------------------- Page: 4 ----------------------
oSIST prEN IEC 61300-2-22:2023
IEC CDV 61300-2-22/Ed3  IEC:2022 – 3 – 86B/4674/CDV
29 INTERNATIONAL ELECTROTECHNICAL COMMISSION
30 ____________
31
32 FIBRE OPTIC INTERCONNECTING DEVICES AND
33 PASSIVE COMPONENTS –
34 BASIC TEST AND MEASUREMENT PROCEDURES –
35
36 Part 2-22: Tests – Change of temperature
37
38
39 FOREWORD
40 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
41 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
42 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
43 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
44 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
45 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
46 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
47 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
48 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
49 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
50 consensus of opinion on the relevant subjects since each technical committee has representation from all
51 interested IEC National Committees.
52 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
53 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
54 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
55 misinterpretation by any end user.
56 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
57 transparently to the maximum extent possible in their national and regional publications. Any divergence between
58 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
59 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment
60 declared to be in conformity with an IEC Publication.
61 6) All users should ensure that they have the latest edition of this publication.
62 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
63 members of its technical committees and IEC National Committees for any personal injury, property damage or
64 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
65 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
66 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
67 indispensable for the correct application of this publication.
68 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
69 rights. IEC shall not be held responsible for identifying any or all such patent rights.
70 International Standard IEC 61300-2-22 has been prepared by subcommittee 86B: Fibre optic
71 interconnecting devices and passive components, of IEC technical committee 86: Fibre optics:
72 This third edition cancels and replaces the second edition published in 2007. It constitutes a
73 technical revision. The changes with respect to the previous edition are:
74 a) Include a passive component, patch cord, splices, fibre management system or protective
75 housing to withstand the effects of a change of temperature or a succession of changes of
76 temperature into the project scope;
77 b) Update the severity categories description, number of cycles, and duration of the extremes,
78 Table 1; in line with the IEC 61753-1;
79 c) Add the Annex (normative) for different test sample types with cable length information.
80

---------------------- Page: 5 ----------------------
oSIST prEN IEC 61300-2-22:2023
IEC CDV 61300-2-22/Ed3  IEC:2022 – 4 – 86B/4674/CDV
81 The text of this standard is based on the following documents:
FDIS Report on voting
86B/XXXXFDIS 86B/XXXXRVD
82
83 Full information on the voting for the approval of this standard can be found in the report on
84 voting indicated in the above table.
85 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
...