iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12750:2002/kprA1:2009

(Amendment)

Safety of woodworking machines - Four-sided moulding machines

Safety of woodworking machines - Four-sided moulding machines

Sicherheit von Holzbearbeitungsmaschinen - Fräsmaschinen für vierseitige Bearbeitung

Sécurité des machines pour le travail du bois - Machines à moulurer sur quatre faces

Varnost lesnoobdelovalnih strojev - Rezkalnik za štiristransko obdelavo

General Information

Status
Not Published
Public Enquiry End Date
03-May-2009
ICS
79.120.10 - Woodworking machines
Technical Committee
VSN - Safety of machinery
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
10-Sep-2012
Due Date
15-Sep-2012
Completion Date
10-Sep-2012
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
EN 12750:2001/prA1 - Safety of woodworking machines - Four-sided moulding machines

Relations

Amends
SIST EN 12750:2002 - Safety of woodworking machines - Four-sided moulding machines
Effective Date
01-Apr-2009
Consolidated By
SIST EN 12750:2002+A1:2009 - Safety of woodworking machines - Four-sided moulding machines
Effective Date
18-Jan-2023
Consolidated By
SIST EN 12750:2002+A1:2009 - Safety of woodworking machines - Four-sided moulding machines
Effective Date
19-Jan-2023
Consolidated By
SIST EN 12750:2002+A1:2009 - Safety of woodworking machines - Four-sided moulding machines
Effective Date
01-Oct-2009

Buy Standard

EN 12750:2002/kprA1:2009EN 12750:2002/kprA1:2009
PreviousNext
Draft
EN 12750:2002/kprA1:2009
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12750:2002/kprA1:2009
01-april-2009
Varnost lesnoobdelovalnih strojev - Rezkalnik za štiristransko obdelavo
Safety of woodworking machines - Four-sided moulding machines
Sicherheit von Holzbearbeitungsmaschinen - Fräsmaschinen für vierseitige Bearbeitung
Sécurité des machines pour le travail du bois - Machines à moulurer sur quatre faces
Ta slovenski standard je istoveten z: EN 12750:2001/prA1
ICS:
79.120.10 Lesnoobdelovalni stroji Woodworking machines
SIST EN 12750:2002/kprA1:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12750:2002/kprA1:2009

---------------------- Page: 2 ----------------------

SIST EN 12750:2002/kprA1:2009
EUROPEAN STANDARD
FINAL DRAFT
EN 12750:2001
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2009
ICS 79.120.10

English Version
Safety of woodworking machines - Four-sided moulding
machines
Sécurité des machines pour le travail du bois - Machines à Sicherheit von Holzbearbeitungsmaschinen -
moulurer sur quatre faces Fräsmaschinen für vierseitige Bearbeitung
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 142.
This draft amendment A1, if approved, will modify the European Standard EN 12750:2001. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12750:2001/prA1:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12750:2002/kprA1:2009
EN 12750:2001/prA1:2009 (E)
Contents Page
Foreword.3
1 Modification to the Foreword .4
2 Modification to Clause 1, Scope.4
3 Modification to Clause 2, Normative references .4
4 Modification to Clause 3, Definitions.6
5 Modification to Clause 4, List of hazards.6
6 Modification to Clause 5, Safety requirements and/or protective measures (hanging
paragraph) .9
7 Modification to 5.1.1, Safety and reliability of control systems.9
8 Modification to 5.1.2, Position of controls .9
9 Modification to 5.1.3, Starting.10
10 Modification to 5.1.4, Normal stopping .10
11 Modification to 5.1.5, Emergency stop .10
12 Modification to 5.1.7, Speed changing .10
13 Modification to 5.1.11, Control duplication .10
14 Modification to 5.1.12, Failure of the power supply .10
15 Modification to 5.2.2, Risk of break-up during operation .10
16 Modification to 5.2.3.1, Spindle strength and performance .10
17 Modification to 5.2.7, Prevention of access to moving parts.11
18 Modification to 5.3.1, Fire and explosion .11
19 Modification to 5.3.4, Electricity.11
20 Modification to 5.3.5, Ergonomics and handling.11
21 Modification to 5.3.6, Lighting.11
22 Modification to 5.3.12, Radiation.12
23 Modification to 5.3.16, Isolation .12
24 Modification to 5.3.17, Maintenance .12
25 Modification to Clause 6, Information for use .12
26 Modification to 6.2, Marking .12
27 Modification to 6.3, Instruction handbook .13
28 Modification to Annex D.15
29 Modification to Annex ZA .16
30 Addition of Annex ZB .17


2

---------------------- Page: 4 ----------------------

SIST EN 12750:2002/kprA1:2009
EN 12750:2001/prA1:2009 (E)
Foreword
This document (EN 12750:2001/prA1:2009) has been prepared by Technical Committee CEN/TC 142
“Woodworking machines - Safety”, the secretariat of which is held by UNI.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of the Machinery Directive.
For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document.
3

---------------------- Page: 5 ----------------------

SIST EN 12750:2002/kprA1:2009
EN 12750:2001/prA1:2009 (E)
1 Modification to the Foreword
Replace the fourth paragraph with the following:
"For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document.".
In the sixth paragraph, replace "D and ZA" with "ZA and ZB".
2 Modification to Clause 1, Scope
Replace the first paragraph with: "This document specifies the significant hazards, hazardous situations and
events as listed in Clause 4 which are relevant to four sided moulding machines with a maximum working
width of 350 mm hereafter referred to as "machines" designed to cut solid wood, chipboard, fibreboard,
plywood and also these materials where these are covered with plastic laminate or edgings.".
Delete the second paragraph.
3 Modification to Clause 2, Normative references
Replace the first paragraph with:
"The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.".
Delete the reference to EN 294:1992 and add "EN ISO 13857:2008, Safety of machinery — Safety distances
nd
to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)", replace in 5.2.5.2, 2
paragraph "4.5.1 of EN 294:1992" with "4.2.4.1 of EN ISO 13857:2008" and "4.3.2.2 of EN 294:1992" with
"4.2.2.1.1 of EN ISO 13857:2008" and replace in 5.2.7 "EN 294:1992" twice with "EN ISO 13857:2008".
Delete reference EN 292-1:1991 in Clause 2 and replace "EN 292-1:1991" with "EN ISO 12100-1:2003"
th
throughout the document and replace "3.24 of EN 292-1:1991" in the 4 paragraph of 5.2.7.2 with "3.27 of
EN ISO 12100-1:2003".
Delete references EN 292-2:1991 and EN 292/A1:1995.
Delete reference to EN 418:1992 and add "EN ISO 13850:2008, Safety of machinery — Emergency stop —
st
Principles for design (ISO 13850:2006)" and replace "EN 418:1992" in 5.1.5, 1 paragraph, with
"EN ISO 13850".
Replace "EN 847-1:1997" with "EN 847-1:2005" throughout the document.
Delete the reference to EN 954-1:1996 and add "EN ISO 13849-1:2008, Safety of machinery — Safety-related
parts of control systems — Part 1: General principles for design (ISO 13849-1:2006)" and replace
"EN 954-1:1996" with "EN ISO 13849-1:2008" throughout the document.
Replace "EN 20354:1993" with "EN ISO 354:2007" throughout the document and replace the bracket in the
title with "(ISO 354:2003)".
Replace "EN 60204-1:1992" with "EN 60204-1:2006" and replace in the title
"(IEC 60204-1:1992, modified)" with "(IEC 60204-1:2005, modified)".
Replace "EN 60947-4-1:1992" with "EN 60497-4-1:2001" throughout the document and replace in the title
"(IEC 60947-4-1:1990)" with "(IEC 60947-4-1:2000)".
4

---------------------- Page: 6 ----------------------

SIST EN 12750:2002/kprA1:2009
EN 12750:2001/prA1:2009 (E)
Replace "EN 60947-5-1:1997" with "EN 60497-5-1:2004" throughout the document and replace in the title
"(IEC 60947-5-1:1997)" with "(IEC 60947-5-1:2003)".
Replace "ISO 230-1:1998" with "ISO 230-1:1996".
Delete reference to ISO 3745:1997 and add "EN ISO 3745:2003, Acoustics — Determination of sound power
levels of noise sources using sound pressure — Precision methods for anechoic and semi-anechoic rooms
(ISO 3745:2003)" and replace "ISO 3745:1997" with "EN ISO 3745:2003" throughout the document.
Replace reference to "HD 21.1 S3:1997" with "HD 21.1 S4:2002, Cables of rated voltages up to and including
450/750 V and having thermoplastic insulation — Part 1: General requirements" and replace "HD 21.1
S3:1997" with "HD 21.1 S4:2002" throughout the document.
Replace reference to "HD 22.1 S3:1997" with "HD 22.1 S4:2002, Cables of rated voltages up to and including
450/750 V and having cross-linked insulation — Part 1: General requirements" and replace "HD 22.1
S3:1997" with "HD 22.1 S4:2002" throughout the document.
Add the following references:
"EN 614-1:2006, Safety of machinery — Ergonomic design principles — Part 1: Terminology and general
principles",
"EN 894-1:1997, Safety of machinery — Ergonomics requirements for the design of displays and control
actuators — Part 1: General principles for human interactions with displays and control actuators
EN 894-2:1997, Safety of machinery — Ergonomics requirements for the design of displays and control
actuators — Part 2: Displays
EN 894-3:2000, Safety of machinery — Ergonomics requirements for the design of displays and control
actuators — Part 3: Control actuators",
"EN 1005-1:2001, Safety of machinery — Human physical performance — Part 1: Terms and definitions
EN 1005-2:2003, Safety of machinery — Human physical performance — Part 2: Manual handling of
machinery and component parts of machinery
EN 1005-3:2002, Safety of machinery — Human physical performance — Part 3: Recommended force limits
for machinery operation
EN 1005-4:2005, Safety of machinery — Human physical performance — Part 4: Evaluation of working
postures and movements in relation to machinery
EN 1037:1995, Safety of machinery — Prevention of unexpected start-up",
"EN 50370-1:2005, Electromagnetic compatibility (EMC) — Product family standard for machine-tools —
Part 1: Emission
EN 50370-2:2003, Electromagnetic compatibility (EMC) — Product family standard for machine-tools —
Part 2: Immunity",
"EN 60439-1:1999, Low-voltage switchgear and controlgear assemblies — Part 1: Type-tested and partially
type-tested assemblies (IEC 60439-1:1999)",
"EN 61310-1:1995, Safety of machinery — Indication, marking and actuation — Part 1: Requirements for
visual, auditory and tactile signals (IEC 61310-1:1995)" and
"EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic
terminology and methodology (ISO 12100-1:2003)
5

---------------------- Page: 7 ----------------------

SIST EN 12750:2002/kprA1:2009
EN 12750:2001/prA1:2009 (E)
EN ISO 12100-2:2003, Safety of machinery — Basic concepts, general principles for design — Part 2:
Technical principles (ISO 12100-2:2003)".
4 Modification to Clause 3, Definitions
Definition 3.19, replace the term with "information from the supplier".
5 Modification to Clause 4, List of hazards
Replace the title with: "List of significant hazards".
Replace the text with:
"This clause contains the significant hazards, hazardous situations and events (see EN 1050:1996) as far as
they are dealt with in this document, identified by risk assessment as significant for the machines as defined in
the scope and which require action to eliminate or reduce the risk. This document deals with these significant
hazards by defining safety requirements and/ or measures or by reference to relevant standards.
These hazards are listed in Table 1 in accordance with Annex A of EN 1050:1996.
6

---------------------- Page: 8 ----------------------

SIST EN 12750:2002/kprA1:2009
EN 12750:2001/prA1:2009 (E)
Table 1 — List of significant hazards
  Relevant
No Hazards, hazardous situations and hazardous EN ISO 12100 clause(s) of
events this document
 Part 1: Part 2:
2003 2003
1 Mechanical hazards due to machine parts or work pieces due to
a) shape; 4.2 4.2.1, 5.2.2, 5.2.3,
4.2.2, 5 5.2.5, 5.2.6,
5.3.2

b) relative location; 5.1.2, 5.1.5,
5.2.5, 5.2.6,
5.2.7
c) mass and stability (potential energy of elements which 5.3.5
may move under the effect of gravity);

d) mass and velocity (kinetic energy of elements in 5.2.5
controlled or uncontrolled motion);
e) mechanical strength. 5.2.2, 5.2.3,
5.2.5, 5.2.6
- accumulation of energy inside the machinery by:
g) liquids and gases under pressure; 4.2 4.10, 5.5.4 5.3.7, 5.3.8
1.1
Crushing hazard 4.2.1 5.2.1 ; 5.2.7
1.2 Shearing hazard 5.2.7
1.3 Cutting or severing hazard 5.2.2 ; 5.2.3 ;
5.2.4 ; 5.2.7 ;
1.4 Entanglement hazard 5.2.3 ; 5.2.4 ;
5.2.6 ; 5.2.7
1.5 Drawing-in or trapping hazard 5.2.7
1.6 Impact hazard 5.2.7.2
1.9 High pressure fluid injection or ejection hazard 4.2.1 4.10 5.3.8
to be continued

7

---------------------- Page: 9 ----------------------

SIST EN 12750:2002/kprA1:2009
EN 12750:2001/prA1:2009 (E)
Table 1 — List of significant hazards (continued)
  Relevant
No Hazards, hazardous situations and hazardous EN ISO 12100 clause(s) of
events this document
 Part 1: Part 2:
2003 2003
2 Electrical hazards due to:
5.3.4 ; 5.3.15 ;
2.1 Contact of persons with live parts (direct contact) 4.3 4.9, 5.5.4
5.3.16
5.3.4 ; 5.3.15 ;
2.2 Contact of persons with parts which have become live 4.3 4.9
5.3.16
under faulty conditions (indirect contact)
3 Thermal hazards resulting in:
5.3.1 ; 5.3.9
3.1 Burns, scalds and other injuries by a possible contact of 4.4
persons with objects or materials with an extreme high

temperature and also by the radiation of heat sources
4 Hazards generated by noise, resulting in:
5.3.2
4.1 Hearing loss (deafness), other physiological disorders 4.5 4.2.2, 5
(loss of balance, loss or awareness)
7 Hazards generated by materials and substances (and their constituent elements) processed or used by
the machinery
5.3.3
4.3 b), 4.4
7.1 Hazards from contact with or inhalation of harmful fluids 4.8
and dusts
5.3.1
7.2 Fire 4.8 4.4
8 Hazards generated by neglecting ergonomic principles in machinery design related to
5.1.2 ; 5.3.5
8.1 Unhealthy postures or excessive effort 4.9 4.7, 4.8.2,
4.11.12,
5.5.5, 5.5.6
6.3
8.3 Neglected use of personal protection equipment 4.8.7
5.3.6
8.4 Local lighting 4.8.6
to be continued

8

---------------------- Page: 10 ----------------------

SIST EN 12750:2002/kprA1:2009
EN 12750:2001/prA1:2009 (E)
Table 1 — List of significant hazards (concluded)
  Relevant
No Hazards, hazardous situations and hazardous EN ISO 12100 clause(s) of
events this document
 Part 1: Part 2:
2003 2003
10 Unexpected start-up, unexpected overrun/overspeed (or any similar malfunction) from:
5.1.1
10.1 Failure/disorder of the control system 4.11, 5.5.4
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 19085-12:2021/A11:2023(Amendment)
Woodworking machines - Safety - Part 12: Tenoning/profiling machines (ISO 19085-12:2021)
EN ISO 19085-12:2021/A11:2023
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-3:2022(Main)
Woodworking machines - Safety - Part 3: Numerically controlled (NC/CNC) boring and routing machines (ISO 19085-3:2021)
EN ISO 19085-3:2021

This document gives the safety requirements and measures for numerically controlled (NC/CNC)
boring machines, NC/CNC routing machines and NC/CNC boring and routing machines (as defined in
3.2, 3.3 and 3.4), capable of continuous production use, hereinafter referred to as "machines".
This document deals with all significant hazards, hazardous situations and events, listed in Annex A,
relevant to the machines when they are operated, adjusted and maintained as intended and under the
conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport,
assembly, dismantling, disabling and scrapping phases have been taken into account.
This document is also applicable to machines fitted with one or more of the following devices/additional
working units, whose hazards have been dealt with:
— additional working units for sawing, sanding, assembling or dowel inserting;
— fixed or movable workpiece support;
— mechanical, pneumatic, hydraulic or vacuum workpiece clamping;
— automatic tool change devices.
It is also applicable to machines fitted with edge-banding equipment, even if the relevant specific
hazards have not been dealt with.
NOTE For the risk assessment needed for the edge-banding equipment, ISO 19085-17 can be useful.
Machines covered in this document are designed for workpieces consisting of:
— solid wood;
— material with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2);
— gypsum boards, gypsum bounded fibreboards, cardboard;
— matrix engineered mineral boards, silicate boards;
— composite materials with core consisting of polyurethane or mineral material laminated with light
alloy;
— polymer-matrix composite materials and reinforced thermoplastic/thermoset/elastomeric
materials;
— aluminium light alloy profiles;
— aluminium light alloy plates with a maximum thickness of 10 mm;
— composite boards made from the materials listed above.
This document does not deal with specific hazards related to:
— use of grinding wheels;
— ejection through openings guarded by curtains on machines where the height of the opening in the
enclosure above the workpiece support exceeds 700 mm;
— ejection due to failure of milling tools with a cutting circle diameter equal to or greater than 16 mm
and sawing tools not conforming to EN 847-1:2017 and EN 847-2:2017;
— the combination of a single machine being used with other machines (as a part of a line);
— integrated workpiece loading/unloading systems (e.g. robots).
This document is not applicable to:
— single spindle hand fed or integrated fed routing machines;
— machines intended for use in potentially explosive atmosphere;
— machines manufactured prior to its publication.

  • Standard
    96 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-16:2022(Main)
Woodworking machines - Safety - Part 16: Table band saws and band re-saws (ISO 19085-16:2021)
EN ISO 19085-16:2021

This document gives the safety requirements and measures for stationary and displaceable table band saws and band resaws with manual loading and/or unloading, designed to cut wood and materials with similar physical characteristics to wood, hereinafter referred to as “machines”.
NOTE 1   For the definition of displaceable machine, see ISO 19085-1:2017, 3.5.
It deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.
NOTE 2   For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
a)   device to tilt the table;
b)   device to tilt the saw unit.
This document does not apply to:
1)   machines driven by combustion engines or power take offs (PTO);
2)   log band sawing machines;
NOTE 3   Log band sawing machines are covered by EN 1807-2.
3)   machines designed for cross-cutting round or irregular shaped work-pieces;
4)   transportable / displaceable machines with a maximum length of the band saw blade of ≤ 2700 mm and a maximum diameter of the powered wheel of ≤ 350 mm;
NOTE 4    Transportable electrically driven machines are covered by the requirements of EN 61029-1:2009 together with EN 61029-2-5:2015.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-2:2022(Main)
Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2021)
EN ISO 19085-2:2021

This document gives the safety requirements and measures for horizontal beam panel circular sawing machines with the saw carriage of the front cutting line mounted below the workpiece support, which are manually and/or powered loaded and manually unloaded, capable of continuous production use, as defined in 3.1 and hereinafter referred to as “machines”.
This document deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.
It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
—    side pressure device;
—    device for powered unloading;
—    unit for scoring;
—    unit for post-formed/soft-formed edge pre-cutting;
—    panel turning device;
—    front side turn table;
—    pushing out device;
—    pneumatic clamping of the saw blade;
—    powered panel loading device;
—    device for grooving by milling tool;
—    one or more additional cutting lines inside the machine for longitudinal and/or head cut (before the transversal cutting line);
—    workpiece vacuum clamping as part of a front side turn table or of a panel loading device;
—    panel pusher;
—    independent panel pushers;
—    additional panel pushers mounted on the panel pusher carriage;
—    additional panel pusher with integrated label printer device;
—    lifting platform;
—    device for automatic loading of thin panels;
—    device for base board unloading by gravity;
—    device for base board powered unloading;
—    device for panel unloading in limited space condition;
—    loading or pre-loading roller conveyors;
—    pressure beam with additional flaps to increase dust extraction efficiency;
—    saw blade cooling system by air or water-air or oil-air;
—    vibrating conveyor with/without trimming unit for offcuts management;
—    predisposition for top loading/unloading by an external system directly on the machine table and/or on the machine preloading roller conveyor and/or on the machine lifting table.
NOTE      base board is a support panel underlying the panel stack, to protect the panels from damages during transportation.
The machines are designed for cutting panels consisting of:
a) solid wood;
b) material with similar physical characteristics to wood (see ISO19085‑1:2021, 2);
c) gypsum boards, gypsum bounded fibreboards;
d) composite materials, with core consisting of e.g. polyurethane or mineral material, laminated with light alloy;
e) cardboard;
f) foam board;
g) matrix engineered mineral boards, silicate boards;
h) polymer‐matrix composite materials and reinforced thermoplastic/thermoset/elastomeric materials;
i) aluminium light alloy plates with a maximum thickness of 10 mm;
j) composite boards made from the materials listed above.
This document does not deal with hazards related to:
—    specific features different from those listed above;
—    the machining of panels with milling tools for grooving;
—    powered unloading of panels;
—    rear half of split pressure beam on the front cutting line;
—    the combination of a single machine being used with any other machine (as part of a line).
It is not applicable to:
—    machines intended for use in potentiall

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-15:2022(Main)
Woodworking machines - Safety - Part 15: Presses (ISO 19085-15:2021)
EN ISO 19085-15:2021

This part of ISO 19085 gives the safety requirements and measures for stationary manually loaded and unloaded:
-   cold presses,
-   hot presses,
-   bending presses,
-   edge/face gluing presses,
-   membrane presses,
-   embossing presses,
where pressing force is applied by hydraulic actuators pushing two flat or shaped surfaces against each other, hereinafter referred to as "machines".
It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also transport, assembly, dismantling, disabling and scrapping phases are taken into account.
NOTE:   For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
-   Device for hot gluing
-   Device for high frequency gluing
-   Device for high frequency shaping
-   Automatic work-piece loading and unloading system
-   intermediate additional platens
-   work-piece extractor
-   work-piece clamping pressure beam
-   split moveable platens.
The machines are designed to process work-pieces consisting of:
-   solid wood;
-   materials with similar characteristics to wood (see ISO 19085-1:2017, 3.2);
-   honeycomb.
This part of ISO 19085 does not deal with any hazards related to:
-   specific devices that differ from the list above;
-   hot fluid heating systems internal to the machine other than electrical;
-   any hot fluid heating systems external to the machine;
-   operation of taking intermediate platens out and in again;
-   the combination of a single machine being used with any other machine (as part of a line).
It is not applicable to:
-   frame presses;
-   membrane presses where the pressing force is applied by vacuum only;
-   presses for producing chipboard, fibreboard, OSB;
-   machines intended for use in potentially explosive atmosphere;
-   machines manufactured before the date of its publication as an international standard.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-14:2022(Main)
Woodworking machines - Safety - Part 14: Four-sided moulding machines (ISO 19085-14:2021)
EN ISO 19085-14:2021

This part of ISO 19085 gives the safety requirements and measures for stationary four sided moulding machines with a maximum working width of 350 mm and a maximum speed of the integrated workpiece feed of 200 m/min, with electrical and/or electronic control system, hereinafter referred to as “machines” designed to cut solid wood and materials with similar physical characteristics to wood (see ISO 19085-1:2017, 3.2).
It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling,
disabling and scrapping phases are taken into account.
NOTE: For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
It is also applicable to machines fitted with one or more of the following devices / additional working units, whose hazards have been dealt with:
- universal spindle;
- glass bead saw unit
- fixed or movable work-piece support;
- quick tool changing system
- laser marking unit
- automatic work-piece returner
- in-feed hopper
- in-feed loading table
This part of ISO 19085 does not deal with any hazards related to:
a) in-feed devices other than in-feed hopper and in-feed loading table (magazines, etc.);
NOTE: For mechanical in-feed devices which also prevent access to the in-feed opening, see 6.6.4.
b) out-feed devices (e.g. mechanical handling systems) except for hazards related to ejection from the machine due to climb cutting
c) single machine being used in combination with any other machine (as part of a line);
It is not applicable to machines intended for use in potentially explosive atmosphere and to machines manufactured prior to its publication.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-17:2021(Main)
Woodworking machines - Safety requirements - Part 17: Edge-banding machines fed by chains (ISO 19085-17:2021)
EN ISO 19085-17:2021

This document gives the safety requirements and measures for edge banding machines fed by chains or
belts, with manual loading and unloading and maximum workpiece height capacity of 100 mm, capable
of continuous production use, hereinafter referred as “machines”.
It deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the
machines, when operated, adjusted and maintained as intended and under the conditions foreseen by
the manufacturer; reasonably foreseeable misuse has been considered too. Also, transport, assembly,
dismantling, disabling and scrapping phases are taken into account.
The machines are designed to process in one pass one end (single-end machine) or both ends (doubleend
machine) of panels of:
— materials with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2), even with a
core sheet of aluminium light alloy;
— gypsum plaster boards.
Edges to be applied by the machine can be made of:
— paper;
— melamine;
— plastic;
— composite materials;
— aluminium;
— light alloy;
— veneer;
— solid wood.
It is also applicable to machines fitted with one or more of the following devices/working units, whose
hazards have been dealt with:
— hot air banding unit;
— laser banding unit;
— infrared banding unit;
— dynamic processing units;
— sanding belt units;
— milling unit installed out of the integral enclosure at the panel side on single-end machines;
— milling unit installed out of the integral enclosure between machines halves of double-end machines;
— additional fixed or movable workpiece support along the feed;
— additional infeed workpiece support;
— additional outfeed workpiece support;
— in-feed device for transversal loading of panels in single-end machines;
— intermediate workpiece support in double-end machines;
— automatic panel returner in single-end machines;
— automatic tool changing;
— quick tool changing system;
— automatic multiple edges infeed device;
— workpiece heaters.
This document does not deal with any hazards relating to:
a) systems for loading and unloading of the workpiece to a single machine other than automatic panel
returner and infeed and outfeed workpiece supports (e.g. robots);
b) the combination of a single machine being used with other machines (as part of a line);
c) workpiece dividing unit installed out of the integral enclosure and/or whose tools protrude out of
the integral enclosure;
d) plasma banding unit.
It is not applicable to machines intended for use in potentially explosive atmosphere nor manufactured
before the date of its publication.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-12:2021(Main)
Woodworking machines - Safety - Part 12: Tenoning/profiling machines (ISO 19085-12:2021)
EN ISO 19085-12:2021

This part of ISO 19085 gives the safety requirements and measures for stationary, manually loaded and unloaded:
-   single end tenoning machines with manual feed sliding table,
-   single end tenoning machines with mechanical feed sliding table,
-   single end tenoning and/or profiling machines with mechanical feed,
-   double end tenoning and/or profiling machines with mechanical feed, also designed to be automatically loaded/unloaded,
-   angular systems for tenoning and profiling with mechanical feed,
with maximum work-piece height capacity of 200 mm for single end machines and 500 mm for double end machines, hereinafter referred to as “machines”.
It deals with all significant hazards, hazardous situations and events relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also transport, assembly, dismantling, disabling and scrapping phases are taken into account.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-1:2021(Main)
Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:20201)
EN ISO 19085-1:2021

This document gives the safety requirements and measures to reduce risks arising during operation,
adjustment, maintenance, transport, assembly, dismantling, disabling and scrapping, related to
woodworking machines capable of continuous production use, hereinafter referred as “machines”.
These safety requirements and measures are those common to most of the machines, when they are
used as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable
misuse has been considered too.
The machines are designed to process solid wood and material with similar physical characteristics to
wood, with hand feed or integrated feed.
This document is intended to be used in conjunction with the other parts of the ISO 19085 series,
applicable to specific machine types. The extent to which all significant hazards of a specific machine
type are covered is indicated in the specific part of the ISO 19085 series relevant to that machine type.
The hazards covered, at least partly, by the requirements of this document, are listed in Annex A.
It is not applicable to machines intended for use in potential explosive atmospheres or to machines
manufactured prior to the date of its publication.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-10:2019/A11:2021(Amendment)
Woodworking machines - Safety - Part 10: Building site saws (contractor saws) (ISO 19085-10:2018, including Corrected version 2019-12)
EN ISO 19085-10:2019/A11:2020

2020-07-20 JF: Through the decision C132/2020 taken on 2020-07-08, the CEN Technical Board approved the revised Annex ZA and therefore, the European Amendment, of EN ISO 19085-10:2019. European amendment is under publication.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day