Intelligent transport systems - Cooperative systems - Definition of a global concept for Local Dynamic Maps (ISO/TS 18750:2014)

The scope of the work is to create an environment and the standards to
implement a Local Dynamic Map (LDM) concept.
The current situation is characterized that applications directly exchanging their
information with the respective counterpart. Parallel applications exchanging their
information in the same way. Therefore, information used by multiple applications
has to be re-transmitted each time and creates a huge amount of data traffic. This
leads finally to the situation where communication channels become overloaded
and/or specific applications cannot be executed anymore due to the nonavailability
of connection resource.
The way out of this crucial situation is given if a common and coordinated local
data store concept is implemented.
This concept radically changes the way applications are developed and
implemented. If an application is requesting information, it is requested first from
the local data store, and only if the information is not available locally it is
requested and transferred from the external source via the air-link.
In this case, several provisions have to be given:
- The access to the data base has to be unified and standardized for all
applications
- The data elements and its attributes used have to be harmonized and
unambiguously defined
- Means to maintain the content and integrity of the data store, and means to
keep the content up to date have to be provided
- Means to apply local regulations for privacy and security have to be developed
- Last but not least the stakeholder-, user- and application-requirements have to
be derived and included in the development

Intelligente Transportsysteme - Kooperative Systeme - Festlegung eines globalen Konzeptes für lokale dynamische Karten (ISO/TS 18750:2014)

Systèmes intelligents de transport - Systèmes coopératifs - Définition d'un concept global pour cartes dynamiques locales (ISO/TS 18750:2014)

Inteligentni transportni sistemi - Kooperativni sistem - Vzpostavitev globalnega koncepta lokalnih dinamičnih zemljevidov (ISO/TS 18750:2014)

Področje uporabe delaje ustvariti okolje in standarde za izvajanje koncepta lokalnih dinamičnih zemljevidov (LDM). Pri trenutnem položaju aplikacije neposredno izmenjujejo informacije z ustrezno nasprotno stranjo. Vzporedne aplikacije informacije izmenjujejo na enak način. Zato je treba informacije, ki jih uporablja več aplikacij, vsakič znova poslati, kar ustvari ogromno količino podatkovnega prometa. To končno vodi v položaj, v katerem komunikacijski kanali postanejo preobremenjeni in/ali določenih aplikacij ni več mogoče izvajati zaradi nerazpoložljivosti vira povezave. To ključno težavo je mogoče odpraviti, če se začne izvajati skupen in usklajen koncept shrambe lokalnih podatkov. Ta koncept bistveno spreminja način razvoja in izvajanja aplikacij. Če aplikacija zahteva informacije, se najprej zahtevajo od lokalne podatkovne shrambe, le v primeru, da informacije niso na voljo lokalno, pa se zahtevajo in prenesejo iz zunanjega vira prek zračne povezave. V tem primeru je treba zagotoviti več določb: – dostop do zbirke podatkov mora biti enoten in standardiziran za vse aplikacije, – podatkovni elementi in njegovi uporabljeni atributi morajo biti usklajeni in nedvoumno opredeljeni, – zagotoviti je treba sredstva za vzdrževanje vsebine in celovitosti podatkovne shrambe ter sredstva za posodabljanje vsebine, – pripraviti je treba sredstva za uporabo lokalnih predpisov za zasebnost in varnost, – nenazadnje je treba izpeljati in v razvoj vključiti zahteve na ravni deležnikov, uporabnikov ter aplikacij.

General Information

Status
Withdrawn
Publication Date
28-Jul-2015
Withdrawal Date
19-Aug-2018
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
03-Jul-2018
Due Date
26-Jul-2018
Completion Date
20-Aug-2018

Relations

Buy Standard

Technical specification
TS CEN ISO/TS 18750:2015 - BARVE
English language
68 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 18750:2015
01-september-2015
,QWHOLJHQWQLWUDQVSRUWQLVLVWHPL.RRSHUDWLYQLVLVWHP9]SRVWDYLWHYJOREDOQHJD
NRQFHSWDORNDOQLKGLQDPLþQLK]HPOMHYLGRY ,6276
Intelligent transport systems - Cooperative systems - Definition of a global concept for
Local Dynamic Maps (ISO/TS 18750:2014)
Intelligente Transportsysteme - Kooperative Systeme - Festlegung eines globalen
Konzeptes für lokale dynamische Karten (ISO/TS 18750:2014)
Systèmes intelligents de transport - Systèmes coopératifs - Définition d'un concept global
pour cartes dynamiques locales (ISO/TS 18750:2014)
Ta slovenski standard je istoveten z: CEN ISO/TS 18750:2015
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
SIST-TS CEN ISO/TS 18750:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN ISO/TS 18750:2015

---------------------- Page: 2 ----------------------

SIST-TS CEN ISO/TS 18750:2015

TECHNICAL SPECIFICATION
CEN ISO/TS 18750

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
May 2015
ICS 35.240.60; 03.220.20
English Version
Intelligent transport systems - Cooperative systems - Definition
of a global concept for Local Dynamic Maps (ISO/TS
18750:2015)
Systèmes intelligents de transport - Systèmes coopératifs - Intelligente Transportsysteme - Kooperative Systeme -
Définition d'un concept global pour cartes dynamiques Festlegung eines globalen Konzeptes für lokale
locales (ISO/TS 18750:2015) dynamische Karten (ISO/TS 18750:2015)
This Technical Specification (CEN/TS) was approved by CEN on 21 March 2015 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 18750:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN ISO/TS 18750:2015
CEN ISO/TS 18750:2015 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST-TS CEN ISO/TS 18750:2015
CEN ISO/TS 18750:2015 (E)
Foreword
This document (CEN ISO/TS 18750:2015) has been prepared by Technical Committee ISO/TC 204
"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent transport
systems” the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO/TS 18750:2015 has been approved by CEN as CEN ISO/TS 18750:2015 without any
modification.


3

---------------------- Page: 5 ----------------------

SIST-TS CEN ISO/TS 18750:2015

---------------------- Page: 6 ----------------------

SIST-TS CEN ISO/TS 18750:2015
TECHNICAL ISO/TS
SPECIFICATION 18750
First edition
2015-05-15
Intelligent transport systems —
Cooperative systems — Definition of a
global concept for Local Dynamic Maps
Systèmes intelligents de transport — Systèmes coopératifs —
Définition d’un concept global pour cartes dynamiques locales
Reference number
ISO/TS 18750:2015(E)
©
ISO 2015

---------------------- Page: 7 ----------------------

SIST-TS CEN ISO/TS 18750:2015
ISO/TS 18750:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 8 ----------------------

SIST-TS CEN ISO/TS 18750:2015
ISO/TS 18750:2015(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols and abbreviated terms . 3
5 Architectural environment . 4
5.1 General . 4
5.2 Local Dynamic Map . 4
5.3 LDM in an ITS-S . 4
5.4 LDM in an ITS-SU . 5
5.5 LDM-related processes . 7
5.5.1 Synchronization of LDMs . 7
5.5.2 Archiving of LDM Data Objects . 7
5.6 LDM for road safety and vehicle-to-vehicle applications . 7
5.7 Security perspective . 7
5.7.1 Authorized access to LDM. 7
5.7.2 Initialisation and installation of applications to the BSMD . 7
5.7.3 Privacy . 8
5.8 LDM versus other similar functionalities in an ITS-SU . 8
6 Functionality . 9
6.1 General definitions and conventions . 9
6.2 Structure of an LDM .10
6.3 LDM Data Storage .12
6.4 LDM services .14
6.4.1 Registration, deregistration, and revocation of ITS-S application processes .14
6.4.2 Security checking in access requests .14
6.4.3 Access request management .14
6.5 LDM maintenance . .17
6.5.1 LDM Area of Maintenance .17
6.5.2 Outdated data management .17
6.6 LDM knowledge base .17
6.6.1 Metadata .17
6.6.2 Utility functions .17
6.7 Interfaces .18
6.7.1 Types of interfaces .18
6.7.2 Parameters of interface functions .18
6.7.3 LDM application management interface .20
6.7.4 LDM data interface .22
6.7.5 Security interface .25
6.7.6 LDM management interface .26
6.7.7 Service access points .27
7 Procedures .29
7.1 LDM services .30
7.1.1 Registration, deregistration, and revocation of ITS-S application processes .30
7.1.2 Security checking in access requests .30
7.1.3 Access request management .30
7.1.4 Second-level filtering .32
7.2 LDM maintenance . .32
7.2.1 Area management .32
7.2.2 Outdated data removal .33
7.3 LDM knowledge database .33
© ISO 2015 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST-TS CEN ISO/TS 18750:2015
ISO/TS 18750:2015(E)

7.4 Interfaces .33
7.5 LDM management .33
7.5.1 Registration of LDM at ITS-S management entity .33
7.5.2 Multiple ITS-SCUs .33
Annex A (normative) ASN.1 modules .34
Annex B (normative) LDM Data Dictionary .45
Annex C (informative) Examples of LDM-DOs .47
Annex D (informative) Location referencing .53
Annex E (informative) Time referencing .57
Bibliography .58
iv © ISO 2015 – All rights reserved

---------------------- Page: 10 ----------------------

SIST-TS CEN ISO/TS 18750:2015
ISO/TS 18750:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT), see the following URL: Foreword — Supplementary information.
ISO/TS 18750 was prepared by the European Committee for Standardization (CEN) in collaboration with
ISO/TC 204, Intelligent transport systems, in accordance with the Agreement on technical cooperation
between ISO and CEN (Vienna Agreement).
© ISO 2015 – All rights reserved v

---------------------- Page: 11 ----------------------

SIST-TS CEN ISO/TS 18750:2015
ISO/TS 18750:2015(E)

Introduction
[16]
An essential property of cooperative intelligent transport systems (C-ITS) is the sharing of data
between different ITS applications providing different ITS services to the users. This approach replaces
the traditional approach where each application is operated in an isolated environment, i.e. referred
to as “silo approach”. The C-ITS approach enables synergies in components of an ITS station unit, e.g.
sharing of communication tools, improves overall performance and reliability, and reduces overall cost.
In order to protect the interests of the various ITS applications, C-ITS implements the concept of an
ITS station (ITS-S) operated as bounded secured managed domain.
The sharing of data between applications is achieved by subscribe/publish mechanisms, where at
least two mechanisms are distinguished, i.e. one allowing ITS-S application processes to subscribe to
standardized messages from ITS message sets (direct forwarding upon reception of such messages
in an ITS station unit) and one using a Local Dynamic Map (LDM) as repository of standardized data
objects. Such data objects stored in an LDM are named LDM Data Objects (LDM-DOs). LDM-DOs provide
self-consistent information on real objects existing at a given geo-location during a given lifetime-
interval. Authorized ITS-S application processes may add LDM-DOs to an LDM and may retrieve LDM-
DOs from an LDM. Retrieval of LDM-DOs may be performed in queries and by means of subscription. A
subscription will result in automatic notifications of selected LDM-DOs either in defined time intervals
or event driven.
This Technical Specification introduces the usage of LDMs and specifies the LDM for global usage in C-ITS.
[32] [34]
Initial implementations of LDMs were in the EU research projects CVIS and Safespot .
vi © ISO 2015 – All rights reserved

---------------------- Page: 12 ----------------------

SIST-TS CEN ISO/TS 18750:2015
TECHNICAL SPECIFICATION ISO/TS 18750:2015(E)
Intelligent transport systems — Cooperative systems —
Definition of a global concept for Local Dynamic Maps
1 Scope
This Technical Specification
— describes the functionality of a “Local Dynamic Map” (LDM) in the context of the “Bounded Secured
Managed Domain” (BSMD), and
— specifies
— general characteristics of LDM Data Objects (LDM-DOs) that may be stored in an LDM, i.e.
information on real objects such as vehicles, road works sections, slow traffic sections, special
weather condition sections, etc. which are as a minimum requirement location-referenced and
time-referenced,
— service access point functions providing interfaces in an ITS station (ITS-S) to access an LDM for
— secure add, update, and delete access for ITS-S application processes,
— secure read access (query) for ITS-S application processes,
— secure notifications (upon subscription) to ITS-S application processes, and
— management access,
— secure registration, de-registration, and revocation of ITS-S application processes at
LDM, and
— secure subscription and cancellation of subscriptions of ITS-S application processes,
— procedures in an LDM considering
— means to maintain the content and integrity of the data store, and
— mechanisms supporting several LDMs in a single ITS station unit.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 21217, Intelligent transport systems — Communications access for land mobiles (CALM) — Architecture
ISO/IEC 8824-1:2008, Information technology — Abstract Syntax Notation One (ASN.1): Specification of
basic notation — Part 1
ISO/IEC 8825-2:2008, Information technology — ASN.1 encoding rules: Specification of Packed Encoding
Rules (PER) — Part 2
ISO 24102-3, Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station
management — Part 3: Service access points
© ISO 2015 – All rights reserved 1

---------------------- Page: 13 ----------------------

SIST-TS CEN ISO/TS 18750:2015
ISO/TS 18750:2015(E)

3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
data integrity
property that data has not been altered or destroyed in an unauthorized manner
[SOURCE: ISO 24534-5]
3.2
International Atomic Time
time since 00:00:00 UTC, 1 January, 2004, identical with UTC except that no leap seconds need to be added
3.3
LDM area of interest
location requirement used in the filter process of queries and automatic notifications
3.4
LDM area of maintenance
information on the operational location area of an LDM used by LDM maintenance
Note 1 to entry: Reference [22] restricts the LDM Area of Maintenance to “geographical area specified by the LDM
for LDM maintenance”
3.5
LDM permissions
information on how a specific ITS-S application process may use an LDM
3.6
LDM data object
location-referenced and time-referenced representation of a real object that is self-explanatory without
any further context information
3.7
LDM data object ID
identifier of an LDM data object which is unique in an LDM
3.8
LDM data dictionary
dictionary of LDM data object types
3.9
LDM data object type
identifier of the type of information contained in an LDM data record
3.10
location validity
information indicating a location at which an LDM data object is valid
3.11
time validity
information indicating a time interval during which an LDM data object is valid
3.12
LDM time of interest
time requirement used in the filter process of queries and automatic notifications
3.13
Local Dynamic Map
entity consisting of LDM data objects, services, and interfaces for manipulating these LDM data objects
2 © ISO 2015 – All rights reserved

---------------------- Page: 14 ----------------------

SIST-TS CEN ISO/TS 18750:2015
ISO/TS 18750:2015(E)

3.14
location reference
uniquely identifiable description of position or area in the real world
3.15
metadata
data about data
Note 1 to entry: The term “metadata” is ambiguous as it is used for fundamentally different concepts. Structural
metadata are information related to the design and specification of data structures; it is also referred to as “data
about the containers of data”. Descriptive metadata are information on instances of data, i.e. the data content; it is
also referred to as “data about data content”.
[SOURCE: ISO 19115]
3.16
time of creation
time when an LDM data record was created and updated
3.17
time of deletion
time when an LDM data record may be deleted and will no more be considered by the LDM search
functionality
3.18
time of generation
time when the content of the LDM data object information field was created
Note 1 to entry: This is different to the time when the LDM data object was written into an LDM.
4 Symbols and abbreviated terms
BSMD Bounded Secured Managed Domain
BSME Bounded Secured Managed Entity
IAT International Atomic Time
ICS Implementation Conformance Statement
ITS Intelligent Transport Systems
ITS-SU ITS Station Unit
IUT Implementation Under Test
LDM Local Dynamic Map
LDM-DD LDM Data Dictionary
LDM-DT LDM Data Type
LDM-DAT LDM Data Attribute Type
LDM-DATID LDM-DAT Identifier
LDM-DTID LDM-DT Identifier
NoO Notification of Obligations
OoT Obligation of Trust
© ISO 2015 – All rights reserved 3

---------------------- Page: 15 ----------------------

SIST-TS CEN ISO/TS 18750:2015
ISO/TS 18750:2015(E)

PMI Privilege Management Infrastructure
SAO Signed Acceptance of Obligations
SUT System Under Test
TPEG Transport Protocol Experts Group
UTC Universal Time Coordinated
5 Architectural environment
5.1 General
This Clause contains informative descriptions of the architectural environment of an LDM.
5.2 Local Dynamic Map
A Local Dynamic Map (LDM) is an entity consisting of LDM Data Objects (LDM-DO), services, and
interfaces for manipulating these LDM Data Objects. LDM-DOs are distinguished by means of their LDM
Data object Type (LDM-DT). LDM-DTs are specified by registration in an LDM Data Dictionary (LDM-
DD). The concept of the LDM-DD is specified in Annex B.
NOTE In Reference [17], LDM-DOs are classified into Type 1 (static permanent data objects, e.g. cartographic
[5] [5]
data ), Type 2 (static transitory data objects, e.g. temporary parking lot on the road ), Type 3 (dynamic
transitory data objects, e.g. works location), and Type 4 (highly dynamic data objects, e.g. location, orientation,
and speed of surrounding vehicles). This classification is not used in this Technical Specification.
An LDM-DO provides information on real objects (cars, road events, etc.) that are existent at a defined
location, e.g. in a defined geo-area and within a defined time interval. In the uppermost simple case, the
information provided by an LDM-DO is just its type, its geo-location, and its time interval of validity.
Such information may be received in an ITS station unit via different channels such as
[30][26]
— DATEX II, TPEG, RDS-TMC (legacy systems), and
[22][21]
— CEN/ETSI/ISO/SAE ITS message sets,
composed of different sets of attributes, and presented in different formats (encodings). ITS-S application
processes capable to receive this information perform a mapping on LDM-DOs and a translation of
attribute formats into the common format given by the LDM-DTs.
5.3 LDM in an ITS-S
The Local Dynamic Map (LDM) specification provided in this Technical Specification is designed for the
architectural environment of an ITS station operated as a Bounded Secured Managed Domain (BSMD)
specified in ISO 21217 and illustrated in Figure 1.
4 © ISO 2015 – All r
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.