SIST EN 50144-2-4:2000

Safety of hand-held electric motor operated tools -- Part 2-4: Particular requirements for sanders

This clause of Part 1 is applicable execpt as follows: 1.1. Addition: This European Standard applies to hand-held reciprocating sanders, belt sanders orbital sanders and random orbital sanders. It does not apply to disc type sanders which are covered by EN 50144-2-3 (in preparation). This standard does not give requirements for the design of the tool for the reduction of the risk arising from noise and vibration.

Sicherheit handgeführter motorbetriebener Elektrowerkzeuge -- Teil 2-4: Besondere Anforderungen für Schwing- und Bandschleifer

Sécurité des outils électroportatifs à moteur -- Partie 2-4: Règles particulières pour les ponceuses

Varnost električnih ročnih orodij - 2-4. del: Posebne zahteve za brusilnike

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2000
• Withdrawal Date: 16-Jul-2009
• ICS: 25.080.50 - Grinding and polishing machines
• ICS: 25.140.20 - Electric tools
• Technical Committee: VGA - Safety of household and similar electrical appliances
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 06-Jul-2009
• Due Date: 29-Jul-2009
• Completion Date: 17-Jul-2009
• Directive: 98/37/EC - Machinery
• Mandate: M/083 - Machinery
• Ref Project: EN 50144-2-4:1999 - Safety of hand-held electric motor operated tools - Part 2-4: Particular requirements for sanders

Relations

• Replaced By: SIST EN 60745-2-4:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-4: Particular requirements for sanders and polishers other than disk type
• Effective Date: 06-May-2014
• Replaced By: SIST EN 60745-2-4:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-4: Particular requirements for sanders and polishers other than disk type
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50144-2-4:2000
01-september-2000
1DGRPHãþD
SIST EN 50144-2-4:1999
9DUQRVWHOHNWULþQLKURþQLKRURGLMGHO3RVHEQH]DKWHYH]DEUXVLOQLNH
Safety of hand-held electric motor operated tools -- Part 2-4: Particular requirements for
sanders
Sicherheit handgeführter motorbetriebener Elektrowerkzeuge -- Teil 2-4: Besondere
Anforderungen für Schwing- und Bandschleifer
Sécurité des outils électroportatifs à moteur -- Partie 2-4: Règles particulières pour les
ponceuses
Ta slovenski standard je istoveten z: EN 50144-2-4:1999
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 50144-2-4:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50144-2-4:2000
...