Aerospace series - Fibre optic systems - Handbook - Part 002: Test and measurement

This document examines the requirements to enable accurate measurement of fibre optic links from start of life and during the life cycle of the system from installation and through-service. This document explains the issues associated with optical link measurement and provides techniques to address these issues. This document discusses the measurement of key parameters associated with the passive layer (i.e. transmission of light through an optical harness). This document does not discuss systems tests, e.g. bit error rates.

Luft- und Raumfahrt - Faseroptische Systeme - Handbuch - Teil 002: Prüfung und Messung

Série aérospatiale - Systèmes des fibres optiques - Manuel d’utilisation - Partie 002 : Essais et mesures

Le présent document examine les exigences nécessaires à la mesure précise des liaisons optiques en début de vie et tout au long du cycle de vie du système depuis son installation jusqu’à ses services. Cette Partie 002 explique les implications associées à la mesure des liaisons optiques et fournit des techniques pour gérer ces implications. Le présent document traite de la mesure des paramètres clés associés à la couche passive (c’est-à-dire la transmission de lumière à travers un harnais optique). Il ne traite pas des essais des systèmes (par exemple : les taux d’erreurs binaires).

Aeronavtika - Sistemi iz optičnih vlaken - Priročnik - 002. del: Preskušanje in merjenje

General Information

Status
Not Published
Public Enquiry End Date
11-Jun-2024
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
11-Apr-2024
Due Date
29-Aug-2024

Relations

Buy Standard

Draft
prEN 4533-002:2024 - BARVE
English language
47 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4533-002:2024
01-junij-2024
Aeronavtika - Sistemi iz optičnih vlaken - Priročnik - 002. del: Preskušanje in
merjenje
Aerospace series - Fibre optic systems - Handbook - Part 002: Test and measurement
Luft- und Raumfahrt - Faseroptische Systeme - Handbuch - Teil 002: Prüfung und
Messung
Série aérospatiale - Systèmes des fibres optiques - Manuel d’utilisation - Partie 002 :
Essais et mesures
Ta slovenski standard je istoveten z: prEN 4533-002
ICS:
33.180.01 Sistemi z optičnimi vlakni na Fibre optic systems in
splošno general
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 4533-002:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4533-002:2024

---------------------- Page: 2 ----------------------
oSIST prEN 4533-002:2024


DRAFT
EUROPEAN STANDARD
prEN 4533-002
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2024
ICS 49.060 Will supersede EN 4533-002:2017
English Version

Aerospace series - Fibre optic systems - Handbook - Part
002: Test and measurement
Série aérospatiale - Systèmes des fibres optiques - Luft- und Raumfahrt - Faseroptische Systeme -
Manuel d'utilisation - Partie 002 : Essais et mesures Handbuch - Teil 002: Prüfung und Messung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4533-002:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4533-002:2024
prEN 4533-002:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Fibre types . 5
5 Test and measurement: key parameters . 6
5.1 Insertion loss (I.L.) . 6
5.2 Return or reflection loss. 7
5.3 Optical power measurement . 8
5.4 Light distribution
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.