oSIST prEN 4533-003:2024

Aerospace series - Fibre optic systems - Handbook - Part 003: Looming and installation practices

This handbook considers the best practices during initial design and how the practices chosen affect through life support of the installation. Looming and installation practices are a critical aspect of any aircraft electrical/avionics installation. In order to provide a reliable and efficient system, it is important that the fibre optic installation is designed for reliability and maintainability.
This document provides technical advice and assistance to designers and engineers on the incorporation of fibre optic harnesses into an airframe, while, wherever possible, maintaining maximum compliance with current aircraft electrical harness procedures.
All topics that are related to the installation of optical cables are addressed in EN 3197.
These rules are applicable for fibre optic cables and connectors defined by EN specifications.

Luft- und Raumfahrt - Faseroptische Systeme - Handbuch - Teil 003: Verfahren zur Fertigung und Installation von Leitungsbündeln

Série aérospatiale - Systèmes des fibres optiques - Manuel d’utilisation - Partie 003 : Règles de l’art pour la fabrication et l’installation des harnais

Le présent manuel présente les règles de l’art pendant la conception initiale et la manière dont les pratiques choisies affectent le soutien de l'installation tout au long de sa durée de vie. Les règles de l’art pour la fabrication et l’installation constituent un aspect essentiel de toute installation électrique/avionique d'aéronef. Afin de fournir un système fiable et efficace, il est important de concevoir l’installation des fibres optiques en pensant à leur fiabilité et à leur maintenabilité.
Le présent document fournit des conseils et une assistance techniques aux concepteurs et aux ingénieurs au sujet de l’incorporation des harnais de fibres optiques dans la cellule d'aéronef, tout en restant, autant que possible, au maximum conformes aux procédures courantes relatives aux harnais électriques à usage aéronautique.
Tous les sujets relatifs à l’installation des câbles optiques sont traités dans l’EN 3197.
Ces règles sont applicables aux connecteurs et câbles optiques définis dans les spécifications EN.

Aeronavtika - Sistemi iz optičnih vlaken - Priročnik - 003. del: Postopki za izdelavo in namestitev vezalnega pasovja

General Information

• Status: Not Published
• Public Enquiry End Date: 11-Jun-2024
• ICS: 33.180.01 - Fibre optic systems in general
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 11-Apr-2024
• Due Date: 29-Aug-2024
• Ref Project: prEN 4533-003 - Aerospace series - Fibre optic systems - Handbook - Part 003: Looming and installation practices

Relations

• Revises: SIST EN 4533-003:2018 - Aerospace series - Fibre optic systems - Handbook - Part 003: Looming and installation practices
• Effective Date: 11-Oct-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4533-003:2024
01-junij-2024
Aeronavtika - Sistemi iz optičnih vlaken - Priročnik - 003. del: Postopki za izdelavo
in namestitev vezalnega pasovja
Aerospace series - Fibre optic systems - Handbook - Part 003: Looming and installation
practices
Luft- und Raumfahrt - Faseroptische Systeme - Handbuch - Teil 003: Verfahren zur
Fertigung und Installation von Leitungsbündeln
Série aérospatiale - Systèmes des fibres optiques - Manuel d’utilisation - Partie 003 :
Règles de l’art pour la fabrication et l’installation des harnais
Ta slovenski standard je istoveten z: prEN 4533-003
ICS:
33.180.01 Sistemi z optičnimi vlakni na Fibre optic systems in
splošno general
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 4533-003:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4533-003:2024

---------------------- Page: 2 ----------------------
oSIST prEN 4533-003:2024


DRAFT
EUROPEAN STANDARD
prEN 4533-003
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2024
ICS 49.060 Will supersede EN 4533-003:2017
English Version

Aerospace series - Fibre optic systems - Handbook - Part
003: Looming and installation practices
Série aérospatiale - Systèmes des fibres optiques - Luft- und Raumfahrt - Faseroptische Systeme -
Manuel d'utilisation - Partie 003 : Règles de l'art pour Handbuch - Teil 003: Verfahren zur Fertigung und
la fabrication et l'installation des harnais Installation von Leitungsbündeln
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4533-003:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4533-003:2024
prEN 4533-003:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Initial design considerations . 5
4.1 General. 5
4.2 System design considerations . 6
4.2.1 Introduction .
...